Bobrick B-9806 Bruksanvisning
Bobrick
Inte kategoriserad
B-9806
Läs gratis den bruksanvisning för Bobrick B-9806 (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 14 personer och har ett genomsnittsbetyg på 3.7 stjärnor baserat på 7.5 recensioner. Har du en fråga om Bobrick B-9806 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
1
4
© 2021 by Bobrick Washroom Equipment, Inc.
Form No. 9806-9807-75_ii Issued 6/21/21 Printed in U.S.A.
In the U.S.A.: BOBRICK WASHROOM EQUIPMENT, INC.
Los Angeles: 6901 Tujunga Ave., North Hollywood, CA 91605-6213: Tel: (818) 982-9600, FAX: (818) 503-1102
New York: 200 Commerce Drive, Clifton Park, NY 12065-1350; Tel: (518) 877-7444, FAX: (518) 877-5029,
or e-mail: customerservice@bobrick.com
In Canada: BOBRICK WASHROOM EQUIPMENT COMPANY
45 Rolark Drive, Scarborough, Ontario M1R 3B1 • Eastern Canada: Tel: (877) 423-6555 • FAX: (877) 423-8555
• Western Canada: Tel: (877) 423-6444 • FAX: (877) 423-8444
BOBRICK.COM
Installation Instructions for Grab Bars
B-9806 and B-9807
no collection
NOTE:
For Installation on
a. Dry-Walls
b. Glass-Partitions and Metal Partitions as well as
c. “back-to-back-installation of two grab bars against each other from
opposite sides of partition-panels (glass and any other partition
material)
Please see separate installation instructions of respected installation kits.
Required Tools
a. Spanner (preferably ring end) 13mm (similar to ½")
b. Laser/Spirit level
c. Phillips head screwdriver
d. sixpcs.#10sheetmetalscrews,athead,stainlesssteel,length
depending on application (e.g. 1/2" length for 1/2" CL-partitions and 1”
length for 1” thick particle board)
3
2
“Exploded” overview of the grab bar ange:
5. Fit Bolt (M8 Screw) & Knurled Washer through Half-Moon Washer.
1. Securelyxange-basestopanel/wallatcorrectpitch
(18"/24"/36"/42")usingtheappropriatexings(seealsoPCD-Pitch
Circle diameter). Ensure a minimum of 6" from corners/returns so that
a spanner can be used later.
2 Usebaseangeasatemplatetomarkdrillingholesonthewallwitha
pencil.
Baseangehas3pcs.of5.0mm(3/16")mountingholes,equally
spaced 120° apart on a 38.0mm (1-1/2") Bolt/Pitch Circle
Diameter (BCD/PCD).
Bobrickrecommendsusing#10Sheetmetalscrews,athead,length
dependingonapplication.Screwheadswanttobebelowush.Usea
level to assist in laying out.
Screw- and drilling examples :
a. #10sheetmetalscrew,athead,1/2"screwlengthfor1/2"
CL-partitions, 3/16" predrill
b. #10sheetmetalscrew,athead,1"lengthfor1"thickparticle
board, 9/64" predrill
3. Fittheangecoversonbothangeswiththebevellededgefacingout.
6. With the slots in the tube facing down, pass the thread of the bolt (M8 Hex Screw)
through the slot in either end of the tube from the inside. Hold the tube and gently
twist to help the bolt (M8 Hex screw) pass through the slot. Repeat for other end
ofthetubewhilekeepingtheslotsfacingdowntoavoidlosingthepartjusttted.
Make sure the shape of the half-moon washer is aligned with the inside diameter
of the tube.
7. Pushboththreadedbolts(M8HexScrews)intoangeendholeand
ngertightenusingtheknurledwasheronthebolt(M8Hex
Screw). Ensure the radius on the pillar matches the radius of the tube.
Tighten both ends with the ring end of a 13mm spanner making sure not to damage the tube with the spanner.
Fit end caps making sure to locate the screwdriver release recess facing down out of casual observation.
4. PlacePillarsonbothangeswithatendtoange(angecover).
1. Flange Base
2. Flange Cover
3. Pillar
4. Half-Moon-Washer
5. Knurled Washer
6. M8 - Screw, hex head
(13mm, 1/2" or 9/16")
Produktspecifikationer
| Varumärke: | Bobrick |
| Kategori: | Inte kategoriserad |
| Modell: | B-9806 |
Behöver du hjälp?
Om du behöver hjälp med Bobrick B-9806 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Bobrick Manualer
7 April 2025
7 April 2025
7 April 2025
7 April 2025
7 April 2025
7 April 2025
7 April 2025
7 April 2025
7 April 2025
7 April 2025
Inte kategoriserad Manualer
- Max
- Festool
- Suevia
- Vroomshoop
- TOGU
- Goodis
- J5create
- Bifinett
- Alba
- Ziehl
- Sogo
- BeamZ
- PCE Instruments
- Flama
- Grandstream
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025