Bogen NQ-S181CT-G2 Bruksanvisning
Läs gratis den bruksanvisning för Bogen NQ-S181CT-G2 (8 sidor) i kategorin högtalare. Guiden har ansetts hjälpsam av 8 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 4.5 recensioner. Har du en fråga om Bogen NQ-S181CT-G2 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/8
740-00123-00B 2006
©2020 Bogen Communications, Inc.
Specications are subject to change.
NQ-S1810CT-G2
Nyquist Gen-2 VoIP
Ceiling Speaker
Installation
With the Nyquist Series Gen-2 VoIP Ceiling Speaker, there is no need
for external ampliers, traditional intercom wiring, or transformer
taps to manually set or adjust. Connect the speaker via Cat5 to a
Power-Over-Ethernet (PoE) Switch or PoE Injector, and it is ready
to use.
The speaker features an integrated 10 watt power amplier, a CAN
Bus interface, a MEMS digital microphone for superior talkback
audio, and a Form C SPDT type 2-amp dry contact relay for
controlling/overriding third-party devices like AV sources.
The speaker also allows DHCP deployment for easy installation.
You can let your Nyquist server automatically discover and
congure your speaker, or you can manually congure it through
the speaker’s web-based user interface (web UI). The web UI also
allows easy updating of rmware and setting of parameters for
Digital Signal Processing (DSP). For more information about the web
UI, refer to the Nyquist Gen-2 VoIP Speakers Conguration Manual.
NQ-S1810WT-G2
Nyquist Gen-2 VoIP
Ceiling Speaker
Installation Manual
Speaker Layout
The layout of the speakers should be planned before installation begins.
Layout starts in one corner of the room. The rst speaker should be
positioned from each wall spaced a distance approximately equal to the
ceiling height of the room.
The next speaker in should be spaced a distance approximately Row 1
equal to twice the height of the ceiling. Each additional speaker in the row
should use this same spacing.
Row 2 starts at twice the ceiling height distance from row 1 and twice
the ceiling height from the wall. The other speakers in this row are also
spaced at twice the ceiling height.
Row 3 is again spaced at twice the ceiling height from the previous row.
The rst speaker starting this row is positioned at one ceiling height
distance from the wall (similar to row 1).
Continue this pattern of alternating rows until the room is covered. The
spacing of the speakers can be adjusted so that the speakers are evenly
spaced in a row and are aesthetically pleasing.
Produktspecifikationer
| Varumärke: | Bogen |
| Kategori: | högtalare |
| Modell: | NQ-S181CT-G2 |
Behöver du hjälp?
Om du behöver hjälp med Bogen NQ-S181CT-G2 ställ en fråga nedan och andra användare kommer att svara dig
högtalare Bogen Manualer
11 Mars 2025
1 Mars 2025
1 Mars 2025
1 Mars 2025
1 Mars 2025
1 Mars 2025
1 Mars 2025
1 Mars 2025
1 Mars 2025
11 December 2024
högtalare Manualer
- Alphatronics
- ACME
- Gefen
- Astell&Kern
- OSD Audio
- McIntosh
- Music Hall
- Tronsmart
- BZBGear
- PowerBass
- Dymond
- Avanca
- Mackie
- Foscam
- WyreStorm
Nyaste högtalare Manualer
16 Juni 2025
15 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025