Britax-Romer KID XP Bruksanvisning


Läs gratis den bruksanvisning för Britax-Romer KID XP (2 sidor) i kategorin Bilbarnstol. Guiden har ansetts hjälpsam av 23 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 5 recensioner. Har du en fråga om Britax-Romer KID XP eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
Removing the seat cover
1. Moving the headrest of the vehicle seat into the top
position.
2. Unhook the cover hook19 on the rear of the backrest.
3. Remove the top part of the cover and fold it forwards to
the seat surface.
4. Unhook the cover hook19 on the front of the backrest.
5. Pull the cover off of the seat surface.
Removing the headrest cover
6.
Unhook the cover loop
20
on the rear of the backrest.
7. Unhook the cover hook19 on the front of the backrest.
8.
Pull off the cover of the headrest
22
.
The cover can now be washed.
Please observe the
instructions on the washing label of the cover:
Re-tting the cover
Proceed in reverse order to put on the cover.
5. CARE AND MAINTENANCE
01
03
05
07
06
02
04
Belt guide (bright red)
Belt holder (dark red)
01
02
03
04
05
06
07 Backrest
Seat cushion
Storage compartment
XP-PAD Adjusting handle of the headrest
19
20
19
19
22
2. INTRODUCTION
We are delighted that our
KID XP
can safely accompany your child through a
new stage in its life.
In order to protect your child correctly, the
KID XP
must always be used
and installed as described in these instructions.
If you have any further questions regarding its use, please feel free to contact us:
These instructions use the following symbols stated below:
Symbol KeywordExplanation
DANGER! Risk of severe personal injury
WARNING!Risk of minor personal injury
CAUTION! Risk of material damage
TIP!Useful notes
Instructions that follow a set sequence are numbered.
Example:
1. Press the button...
16
15
Belt guide colours
For better differentiation, the two vehicle seat
belts are highlighted in different colours. The di-
agonal seat belt 16 in dark red and the lap belt
15 in bright red. The colour of the belt guides
on the child safety seat follows the same colour
scheme.
4. USE IN THE VEHICLE
Please observe the instructions for using children's restraining systems in the operating
instructions of your vehicle.3-point belt. The seat can be used in vehicles with a
Please nd the information on the seats approved for child safety seats of the weight classes 15 to
36 kg in the operating instructions of your vehicle.
The is approved for one method of installation:KID XP
SymbolInstallation typeApproval type
with the vehicle's 3-point seatbeltuniversal
You can use your child safety seat as follows:
In the direction of travelyes
against the direction of travelno
1)
with 2-point beltno
with 3-point belt 2) yes
on front passenger seatyes
3)
on outer rear seatyes
on centre rear seat (with
3-point belt)yes 4)
1) Use is permitted on a rearward-facing vehicle seat (e.g. in a van or minibus) only
if the vehicle seat is also approved for use by adults. The seat may not be in the area of effect
of an airbag.
2) The safety belt must be approved to ECE R 16 or a comparable standard (see test label on
belt with an "E" or "e" in a circle).
3) If there is a front airbag: Slide the vehicle seat a long way back and refer to any instructions
in vehicle owner's manual.
4) Cannot be used if the vehicle seat is equipped with only a 2-point belt.
15–36 kg
3. Certification
BRITAX RÖMER
Child safety seat
Testing and certication
In accordance with ECE* R 44/04
GroupBody weight
KID XP
II+III15 to 36 kg
*ECE = European Standard for Child Safety Equipment
The child safety seat has been designed, tested and certied according to
the requirements of the European Standard for Child Safety Equipment (ECE
R 44/03). The seal of approval E (in a circle) and the approval number are
located on the orange approval label (sticker on the child safety seat).
DANGER!This approval will be invalidated if you make any modications
to the child safety seat. Only the manufacturer is permitted to
make modications to the child safety seat.
WARNING! Use the
KID XP
exclusively for securing your child in your
vehicle. It is in no way suitable as a seat or toy in the home.
Never secure your child or the child safety seat with a 2-point DANGER!
belt. If you secure your child in the child seat with only a
2-point belt, then in the event of an accident this may cause
serious injuries to your child, possibly resulting in death.
PAGE I
6. DISASSEMBLY AND DISPOSAL
Please ensure that you only use the original BRITAX RÖMER replacement seat
covers, as the seat cover is an integral part of the child safety seat and fulls im-
portant functions to ensure the smooth operation of the system. Replacement seat
covers are available from your dealer or from an ADAC ofce.
• The cover can be removed and washed with a mild detergent in the delicates
programme of the washing machine (30 °C). Please observe the instructions
on the washing label of the cover.
• The plastic parts and the XP-PAD can be cleaned with a soap sud. Do not use
any caustic cleaning agents (such as solvents).
DANGER! The child seat must not be used without the seat cover.
1. PRODUCT OVERVIEW
1. Operate the release key of your vehicle seat buckle
2. Open the XP-PAD 04 on the Velcro fastener and
remove the diagonal belt 16 .
3. Open the dark red belt holder 01 by pressing back-
wards the key on the belt holder 01 and unthread-
ing the diagonal belt 16 .
The child safety seat can now be removed.
the child safety seat must always be DANGER!
secured when it is in the vehicle, even if no child is
being transported.
DISPOSAL:
Please observe the waste disposal regulations in your country.
Disposal of packagingContainer for cardboard boxes
Seat coverResidual waste, thermal utilisation
Plastic partsAccording to the labelling in the
corresponding container
Metal partsContainer for metals
Belt strapsContainer for polyester
Buckle and tongueResidual waste
REMOVAL:
UNFASTENING YOUR CHILD:
1. To unfasten your child, use the release button of your vehicle seat buckle.
The XP-PAD can remained applied for easier use on the diagonal TIP!
belt of your vehicle, the diagonal belt must be retensioned before every
journey; see: Section [page II].10 step 12
01
16 04
15 to 36 kg
(~4 to 12 years of age)
www.britax.eu
2000010044 14/09
User instructions
KID XP
GB
140901_KID_XP_GB.indd 102.09.2014 14:37:52

Betygsätt denna manual

4.9/5 (5 Recensioner)

Produktspecifikationer

Varumärke: Britax-Romer
Kategori: Bilbarnstol
Modell: KID XP
Färg på produkten: Zwart, zilver
Förpackningens vikt: 17700 g
Justerbar i höjdled: Ja
Skärm diagonal: 31.5 "
Upplösning: 6144 x 3456 Pixels
Pekskärm: Nee
Pixel densitet: 223 ppi
Original bildförhållande: 16:9
Ethernet LAN: Ja
Videolägen som stöds: 480p, 576p, 720p, 1080i, 1080p, 2160p
Betraktningsvinkel, horisontell: 178 °
Betraktningsvinkel, vertikal: 178 °
Medföljande kablar: AC, USB Type-A to USB Type-C
Skärmform: Flat
Typiskt kontrastförhållande: 2000:1
Snabbstartsguide: Ja
Marknadspositionering: Bedrijf
Frekvensområde horisontellt: 30 - 220 kHz
Frekvensområde vertikalt: 56 - 76 Hz
Antal HDMI-portar: 1
Antal Ethernet LAN (RJ-45)-portar: 1
Monteringsalternativ för kabellås: Ja
Kabellåsspårtyp: Kensington
Inbyggda högtalare: Ja
Genomsnittlig effekt: 28 W
Strömförbrukning (i standby): 0.5 W
Strömförbrukning (max): 420 W
Antal högtalare: 2
Display, antal färger: 1,07 miljard kleuren
HDCP: Ja
Strömförbrukning (när avstängd): 0.3 W
Maximal uppdateringshastighet: 60 Hz
High Dynamic Range (HDR)-teknologi: DisplayHDR 600
HDR-stöd: Ja
Megapixlar: 8 MP
HD typ: 6K Ultra HD
Inbyggd mikrofon: Ja
HDMI: Ja
HDMI-version: 2.1
Displayteknik: LCD
Respons tid: 8 ms
Pixelpitch: 0.1134 x 0.1134 mm
VESA montering: Ja
Panelmonteringsgränssnitt: 100 x 100 mm
Rambredd (nederst): 23.05 mm
Rambredd (sida): 10.35 mm
Rambredd (överst): 42.93 mm
Antireflexskärm: Ja
Hållbarhetscertifikat: ENERGY STAR, RoHS
Ljusstyrka (typiskt): 450 cd/m²
RGB färgrymd: DCI-P3
Inbyggd kamera: Ja
Djup (utan bas): 66.29 mm
Höjd (utan bas): 486.64 mm
Bredd (utan bas): 717.42 mm
Vikt (utan bas): 8610 g
Skärmdiameter i centimeter: 79.94 cm
Energiförbrukning (HDR) per 1000 timmar: 83 kWu
Energieffektivitetsklass (SDR): G
Energiförbrukning (SDR) per 1000 timmar: 68 kWu
Energieffektivitetsklass (HDR): G
Enhetsbredd (med stativ): 717.42 mm
Djupenhet (med stativ): 237 mm
Enhetshöjd (med stativ): 682.63 mm
Vikt (med stativ): 12990 g
AMD FreeSync: Nee
NVIDIA G-SYNC: Nee
Färgspektrum: 100 procent
On Screen Display (OSD): Ja
Antal USB Type-A nedströmsportar: 5
Version USB-hubb: 3.2 Gen 2 (3.1 Gen 2)
Typ av bakgrundsbelysning: LED
Innehåller inte: PVC/BFR
Typ av mat: Intern
Förvaringstemperatur: -20 - 60 °C
Typ av panel: IPS
Roterbar: Ja
Horisontellt vridbar: -30 - 30 °
Hörlurarna avstängda: Nee
Förvaringsfuktighet: 5 - 90 procent
Inbyggd USB-hubb: Ja
Bildstorlek (horisontell): 696.73 mm
Bildstorlek (vertikal): 391.91 mm
Stativ ingår: Ja
Höjd, drift: 0 - 5000 m
Höjd vid förvaring: 5000 - 12192 m
Kant fram: Zwart
Avtagbart stativ: Ja
Fötter färg: Zilver
Utan tungmetaller: Hg (kwik)
sRGB-täckning (genomsnitt): 100 procent
Flimmerfri teknik: Ja
Teknik för lågt blått ljus: Ja
Skriv USB-uppströmsport: USB Type-C
DisplayPort-version: 2.1
Gångjärn: Ja
Pivothörn: -90 - 90 °
Antal Mini DisplayPort: 1
Hårdhetsyta: 3H
USB-strömförsörjning: Ja
USB-strömleverans till max.: 140 W
USB Type-C DisplayPort alternativt läge: Ja
HDCP-version: 2.2
Antal USB Type-C nedströmsportar: 3
Svarstid (snabb): 5 ms
Wifi: Nee
AC-ingångsspänning: 100 - 220 V
AC-ingångsfrekvens: 50/60 Hz
Strömförbrukning (typiskt): 68.1 W
Drifttemperatur (TT): 0 - 40 °C
Relativ luftfuktighet i drift (VV): 10 - 80 procent
Tiltvinkelområde: -5 - 21 °
Energieffektivitetsskala: A tot G
Antal Thunderbolt 4-portar: 2
lutningsjusteringar: Ja

Behöver du hjälp?

Om du behöver hjälp med Britax-Romer KID XP ställ en fråga nedan och andra användare kommer att svara dig