Brother CT-8000 Bruksanvisning

Brother Skrivare CT-8000

Läs gratis den bruksanvisning för Brother CT-8000 (3 sidor) i kategorin Skrivare. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.1 stjärnor baserat på 1.5 recensioner. Har du en fråga om Brother CT-8000 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/3
Offset Catch Tray (CT-8000)
You can install an optional offset catch tray to this printer.
Be sure to switch off the power and unplug the power cord from the AC power outlet/socket before
carrying out the operations. If you do not, you might get an electrical shock.
Installing the Offset Catch Tray
1
Turn off the printer power switch.
2
Pull out the power cord from the AC power outlet/socket
and then the printer.
3
Open the back cover by lifting the lower gray lever at the
top left corner of the back of the printer.
Do not touch any parts inside the printer.
WARNING
4
Loosen the right and left screws as shown in the
illustration to uninstall the top cover of the paper exit.
5
Insert the right and left tabs of the offset catch tray into the
holes at the top of the printer (1), and then slowly lower it
down on the top of the printer (2).
6
Secure the screws at both ends of the bottom of the offset
catch tray.


Produktspecifikationer

Varumärke: Brother
Kategori: Skrivare
Modell: CT-8000

Behöver du hjälp?

Om du behöver hjälp med Brother CT-8000 ställ en fråga nedan och andra användare kommer att svara dig