Brother ScanNCut CM350H Bruksanvisning

Brother Pappersskärare ScanNCut CM350H

Läs gratis den bruksanvisning för Brother ScanNCut CM350H (12 sidor) i kategorin Pappersskärare. Guiden har ansetts hjälpsam av 15 personer och har ett genomsnittsbetyg på 3.5 stjärnor baserat på 8 recensioner. Har du en fråga om Brother ScanNCut CM350H eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/12

Basic Quilting Guide

– Making a Quilt –

c Fabric ............................................... We recommend 100% cotton that is not too thick.

c Quilt batting ..................................... Normally, medium-thick 100% polyester batting is used.

There is also cotton batting.

c Thread .............................................. Since there are various types, for example, for piecing, for

quilting, for hand-sewing and for machine-sewing, select

the type appropriate for the desired purpose and use.

c Sewing needles/pins.......................... Since there are various types, for example, for piecing

and for quilting, select the type appropriate for the

desired purpose.

c Quilting pencil (erasable pen, etc.) ... Use to copy patterns onto fabric and to draw quilting

lines.

c Thimble ............................................ Use to protect your fingers when

quilting.

Place a thimble on the middle

finger of your right hand to push

the needle and on the middle or

index finger of your left hand to

stop the needle.

c Quilting hoop ................................... Use the hoop for quilting with a

cleaner finish.

c Thread clipper

c Iron/press

c Measuring stick

1 Preparing Materials and Equipment

Refer to “Cutting Around Drawings” in the Operation Manual to specify a seam

allowance and draw the pattern lines, and then cut out the pieces. Be sure to

observe the following instructions.

Check the fabric grain (weaving direction).

* When making pieces from patterned fabric,

the pattern has priority over the fabric grain.

* Observe the fabric grain on the pattern if it is

indicated.

If a seam allowance will be drawn, attach the

fabric with the wrong side facing up.

Align the lengthwise grain with the insertion

direction.

Select the patterns, and then arrange them.

If the fabric grain and pattern angle are not

aligned, rotate the pattern.

* Pre-installed patterns will automatically be

arranged with their grain along the

lengthwise grain of the fabric.

Specify the seam allowance.

Widths that can be specified with this

machine: 3 mm, 5mm, 1/4", 7mm, 10mm,

1/2", 5/8"

1 Stitching line

2 Seam allowance

2 Cutting Pieces (Fabric)

Lengthwise-grain

fabric

Hard to stretch

Crosswise-grain

fabric

Slightly stretched

Bias-grain fabric Easy to stretch

1 Lengthwise-

grain fabric

2 Crosswise-

grain fabric

3 Bias-grain

fabric

4 Selvage

1 Standard mat

2 High tack adhesive

fabric support sheet

(An additional

purchase may be

required depending

on the machine

model.)

3 Wrong side of

fabric

Standard seam allowance

Patchwork 5 mm (3/16"), 1/4", 7 mm

Appliqué 3 mm (1/8"), 5 mm (3/16")

Memo

● If you are using a sewing machine to make

the quilt, refer to your machine’s instruction

manual for information about the straight

stitch, reverse/reinforcement stitch and

appliqué stitch. When sewing pieces

together without sewing reverse/

reinforcement stitches, sew fine stitches,

which have a short stitch length.

Make a knot at the end of the thread to secure it.

Wind the thread 2 or 3 times around the

needle.

Hold the wound thread and pull out the

needle.

1 Thread knot

Use scissors to cut off any excess thread.

Sew fine stitches when sewing pieces together.

1 2 mm (1/16 inch)

Attach appliqués so that threads are imperceptible.

1 Insert the needle

2 Feed out the needle

At the beginning and end of stitching, sew one

backstitch, and then secure the thread to prevent it

from becoming loose.

1 Feed out the needle

2 Insert the needle

3 Feed out the needle

4 Backstitch

At the end of stitching, sew a backstitch, make a

knot, and then cut the thread.

Place the needle at the end of stitching.

1 Backstitch

Wind the thread twice around the needle,

hold the wound thread with your finger, and

then pull out the needle.

3 Basic Hand Sewing Techniques

Thread knot

Running stitch

Blindstitch

Backstitch

French knot

Produktspecifikationer

Varumärke:	Brother
Kategori:	Pappersskärare
Modell:	ScanNCut CM350H
Färg på produkten:	Gold, White
Timer:	Ja
Bredd:	45 mm
Användarmanual:	Ja
Blåtand:	Nee
Pekskärm:	Nee
Marknadspositionering:	Sporthorloge
Vattentät:	Ja
Stoppur:	Ja
Världsklocka funktion:	Ja
Klockläge:	12/24 uur
Klockfodralmaterial:	Kunststof
Däckmaterial:	Kunststof
Vattentät upp till:	100 m
Säkerhetsfunktioner:	Waterbestendig
Väckarklocka:	Ja
Turhistoria:	30
Inbyggd avståndsmätare:	Nee
Bakgrundsbelysning:	Ja
Pulsmätare:	Nee
Timerlängd (max):	24 uur
Bröstband:	Nee
Pulsbaserad kaloriberäkning:	Nee