BSS Audio FDS-310 Bruksanvisning
BSS Audio
Inte kategoriserad
FDS-310
Läs gratis den bruksanvisning för BSS Audio FDS-310 (40 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 25 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 13 recensioner. Har du en fråga om BSS Audio FDS-310 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/40
FDS 310
User Manual
2
This equipment has been tested and found to comply with the following European Standards for
Electromagnetic Compatibility:
Emission Specification: EN55013 (1990) (Associated equipment)
Immunity Specification: EN50082/1 (1992) (RF Immunity, Fast Transients and ESD)
Mains Disturbance: EN61000/3/2 (1995)
For continued compliance ensure that all input and output cables are wired with cable screen connected to Pin
1 of the XLR. The input XLR Pin 1 on BSS equipment is generally connected to chassis via a capacitor to
prevent ground loops whilst ensuring good EMC compatibility.
V 2.0 JMK 9 August 1996
We have written this manual with the aim of helping installers, sound engineers and musicians to get to grips
with the FDS-310 and obtain its maximum capability.
If you are new to BSS products, we recommend that you begin at the start of the manual. If, however, you are
already familiar with the intended application, and just want to get the unit installed without delay, then
follow the highlighted sections.
We welcome any comments or questions regarding the FDS-310 or other BSS products, and you may contact us
at the address or World Wide Web site given in the warranty section.
3
Contents
Contents
1.0 What is a Crossover? 5
2.0 The difference between Active
and Passive Crossovers 6
3.0 Other advantages 7
4.0 The Linkwitz-Riley advantage 8
5.0 What is special about BSS
Crossovers? 9
6.0 Unpacking 9
7.0 Mechanical Installation 12
8.0 Mains Power Connection 13
9.0 Input Connections 14
9.1 Using Jack Plugs. 14
9.2 Using XLR Plugs. 14
10.0 Output Connections 15
10.1 Using Phone Plugs 15
10.2 Using XLR Plugs 15
11.0 Connection and Setup 16
11.1 Selecting '2-Way' 2 Channel Operation 16
11.2 Selecting '3-Way' Mono Operation 17
11.3 2-Channel Sub-Woofer Operation 18
13.0 Unusual Crossover Points -
for 3-way systems only 19
12.0 Monaural Sub-Woofer Operation -
for stereo 2-way systems only 19
14.0 How to Equalise CD Horns 20
15.0 Full range Output -
3-way operation only 21
Produktspecifikationer
| Varumärke: | BSS Audio |
| Kategori: | Inte kategoriserad |
| Modell: | FDS-310 |
Behöver du hjälp?
Om du behöver hjälp med BSS Audio FDS-310 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad BSS Audio Manualer
26 Mars 2025
16 September 2024
16 September 2024
16 September 2024
16 September 2024
16 September 2024
16 September 2024
16 September 2024
16 September 2024
16 September 2024
Inte kategoriserad Manualer
- Festool
- Robinhood
- Gretsch Guitars
- AJH Synth
- CMI
- Sacrament
- VAVA
- Qian
- StrikeMaster
- Lexibook
- Samsung
- ZTE
- Panasonic
- BabyHome
- ATen
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025