Bulbrite String 810006 Bruksanvisning

Bulbrite ej kategoriserat String 810006

Läs gratis den bruksanvisning för Bulbrite String 810006 (1 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 2 recensioner. Har du en fråga om Bulbrite String 810006 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/1
Decorative String Light Kit
Item #: 810006
Ord. Code: STRING10/E26/ S14KTBLACK-
10 SocketsMedium (E26) Base Black
Cable/Cord Length = 14 feet
Socket Spacing = 16 Inches
USAGE INSTRUCTIONS
of fire, electric shock and personal injury; including the following:
a) Ground Fault Circuit Interrupter (GFCI) protection is to be provided on the circuit(s) or outlet(s) to be used for the wet
location portable luminaire. Receptacles are available having built in GFCI protection and are able to be used for this -
measure of safety.
b) Use only with and extension cord for outdoor use, such as an extension cord of cord type SJTW.
INSTALLATION INSTRUCTIONS
IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation.
WARNING: These products may represent a possible shock or fire hazard if improperly installed or attached in any way. Products
should be installed in accordance with these instructions; and current electrical code and/or the current National Electric Code
(NEC).
CAUTION: To reduce the risk of fire, electric shock or injury to persons:
1. String Lights are intended for installation by trained qualified electrical contractors.
2. Suspend strings properly by attaching suspension cable (not provided) to solid support structures.
3. Light sockets must be suspended so that bulbs are facing down ONLY.
4. Keep combustible material clear of bulbs. DO NOT allow lamps or sockets to come into contact with walls, ceilings,
fabrics associated with shades, blinds or other materials. Lamps should hang freely in a downward direction with a
minimum of space from the nearest object.
5. DO NOT cluster the bulbs.
6. Not intended for installation in ceilings, soffits, cabinets or other enclosed spaces.
7. Not intended for lighting aquariums.
8. DO NOT secure String Lights to buildings or other structural supports using nails, staples or other sharp conducting
materials.
9. Avoid damage to the insulation during installation. DO NOT pierce or otherwise compromise wire or socket outer
covering, jacket or sheathing.
10. Periodically inspect wire and sockets for degradation due to weather. UV light or other damage. Promptly replace
worn out light string.
11. DO NOT MOUNT THE STRING LIGHTS WITH SOCKETS FACING UPWARD!
12. DO NOT OVERLOAD ANY SOCKET MAXIMUM WATTAGE RATING!
13. DO NOT OVERLOAD MAXIMUM WATTAGE CAPACITY!
14. - WARNING RISK OF ELECTRIC SHOCK!
15. DO NOT OVERTIGHTEN BULBS WHEN INSTALLING INTO SOCKETS!
Maximum Wattage per Socket:
Bulb Wattage Used Maximum Number of 14 Strings Maximum Number of Bulbs
11 Watts 8 80 (10 Sockets per String)
25 Watts 3 30 (10 Sockets per String)
Maximum wattage for string run is 960W.
o 11 Watt Bulb x 10 Sockets x 8 Strings = 880W
o 25 Watt Bulb x 10 Sockets x 3 Strings = 750W
Maximum wattage per socket is 25W. Do not use bulbs that exceed 25 watts.

Produktspecifikationer

Varumärke: Bulbrite
Kategori: ej kategoriserat
Modell: String 810006

Behöver du hjälp?

Om du behöver hjälp med Bulbrite String 810006 ställ en fråga nedan och andra användare kommer att svara dig