Bunn Titan TF Bruksanvisning
Bunn
kaffebryggare
Titan TF
Läs gratis den bruksanvisning för Bunn Titan TF (4 sidor) i kategorin kaffebryggare. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 1.5 recensioner. Har du en fråga om Bunn Titan TF eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
BUNN-O-MATIC CORPORATION
POST OFFICE BOX 3227
SPRINGFIELD, ILLINOIS 62708-3227
PHONE: (217) 529-6601 FAX: (217) 529-6644
40359.0000D 4/12 ©2007 Bunn-O-Matic Corporation
USE & CARE INFORMATION
CAUTION: CLEAN AND SANITIZE YOUR SERVER BEFORE USING. SEE NOTE 1 of DAILY CLEANING.
3.0 Gallon
TITAN TF SERVER
2
INTRODUCTION
This server is intended for use with a BUNN
®
TITAN DUAL, or TITAN SINGLE coffee brewer only. When
proper precautions are followed, 1.5 to 3.0 gallons of coffee may be brewed directly into the server and then
transported to a remote serving location. The server must be placed on a sturdy counter or shelf.
USER NOTICES
The notices on this server should be kept in good condition. Replace unreadable or damaged labels.
DAILY CLEANING
CAUTION: DAILYCLEAN AND SANITIZE YOUR SERVER
NOTE: Bunn-O-Matic recommends the 3 step method for cleaning and sanitizing the server. The 3 step method
consists of hot soapy water using an approved detergent, a fresh water rinse, and an aqueous sanitizing
solution using an approved sanitizer. non-chlorine Do not submerge server.
1. Run a complete brew cycle into the server and let it set for a minute. Empty the server of just hot water
completely by opening the faucet.
2. Remove the lid, fill server with cleaning solution and thoroughly clean the inside of server.
3. Rinse server thoroughly using fresh water rinse.
4. Fully fill server with sanitizing solution for 5 minutes then drain through fully open faucet.
5. Remove the faucet handle/stem assembly by unscrewing the faucet nut just behind the faucet handle.
6. Use enclosed cleaning brush to thoroughly clean the faucet spout and connector.
7. Remove the cap, sight gauge tube and washers.
8. Use enclosed cleaning brush to thoroughly clean the fill tube of the lid assembly and sight gauge tube.
9. Disassemble the faucet/stem assembly. Thoroughly wash all faucet parts and lid in a mild detergent and water
solution. Rinse the parts in hot water. Sanitize the parts for five minutes, then air dry completely.
10. Reassemble the faucet/stem assembly and attach it to the faucet.
11. Install the sight gauge tube and washers in the shroud and secure with the shroud cap.
12. Wash the entire outside surface of the server with a clean damp cloth.
#26186.0000
40359 082807
3
18. 26186.0000 Decal, Warning Hot Liquid
19. 40097.0001 Spacer
20. 32591.1000 Tube, Silicone .50" I.D. x 2.0"(Cut to length)
21. 12422.0001 Clamp, Tube .59"/.66" I.D.
22. 39543.0001 Guard, Faucet
23 12422.0012 Clamp, Tube .81"/.97" I.D.
24. 40271.1100 Cover, Bottom
45279.0000 Screw, Pan Head #8-32 x .25"
25. 01221.0000 C-Ring, Faucet Shank
26. 03093.0002 Wing Nut, Faucet
27. 26685.0000 Faucet Assy, Bunn Handle
26685.0003 Faucet Assy, Plain Black Handle
28 26684.0000* Faucet Handle, Bunn
07096.0007* Faucet Handle, Plain black
29. 29165.0001* Faucet Bonnet
30. - - - - - - - - * Faucet Body (Not available. Order item 27)
31. 35301.0000 Brush, Cleaning (Not Illustrated)
* Component of item 27
6
1
7
2
3
4
8
5
8
15
14
9
16-17
18
19
22
21
20
23
24
SERVER
P3896
13 12 11 10
40359 010212
28
29
11
12
13
30
15 25 26
27
Vertical Faucet
REPLACEMENT PARTS
1. 39542.1000 Shroud, Sight Gauge (Includes Item 4)
2. 35010.0000 Plate, Decal Mounting
3. 35009.0000 Decal, Bunn
35009.0001 Decal, Plain Black
4. 35004.0002 Backing, Sight Gauge 3.0 Gal.
5. 35005.0003 Sight Gauge Tube 3.0 Gal.
6. 39083.0000 Cap, Shroud
7. 02367.0000 Screw, Truss Head #6-32 x .62"
8. 39143.0001 Washer, Sight Gauge Tube
9. 39081.0000 Handle, Faucet, Bunn (Horizontal Faucet)
10. 35003.0000 Nut, Faucet Spout (Horizontal Faucet)
11. 00601.0000* Faucet Spring
12. 29164.0000* Faucet Stem
13. 00600.0000* Faucet Seat Cup
14. 35074.0000 Screw, Hex Hd Black M4 x .7x25
15. 40132.0000 Spout, Faucet (Horizontal Faucet)
41159.0001 Shank, Faucet (Vertical Faucet)
16. 39487.1000 Lid Assembly 3.0 Gal. (Includes item 17)
17. 40106.0000 Cap Assembly
Produktspecifikationer
| Varumärke: | Bunn |
| Kategori: | kaffebryggare |
| Modell: | Titan TF |
Behöver du hjälp?
Om du behöver hjälp med Bunn Titan TF ställ en fråga nedan och andra användare kommer att svara dig
kaffebryggare Bunn Manualer
24 Augusti 2025
12 Juni 2025
29 December 2024
29 December 2024
29 December 2024
24 September 2024
16 September 2024
15 September 2024
15 September 2024
12 September 2024
kaffebryggare Manualer
- Estella Caffe
- Rhea
- Olympia
- Clatronic
- Black And Decker
- Becken
- IKEA
- Silvercrest
- C3
- Brandt
- Bauknecht
- Nespresso
- Scarlett
- Bifinett
- Zelmer
Nyaste kaffebryggare Manualer
24 Augusti 2025
24 Augusti 2025
24 Augusti 2025
24 Augusti 2025
24 Augusti 2025
24 Augusti 2025
24 Augusti 2025
24 Augusti 2025
24 Augusti 2025
24 Augusti 2025