Byron BY103 Bruksanvisning
Byron
Dörrklocka
BY103
Läs gratis den bruksanvisning för Byron BY103 (4 sidor) i kategorin Dörrklocka. Guiden har ansetts hjälpsam av 6 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 3.5 recensioner. Har du en fråga om Byron BY103 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
1: Place a small flat screwdriver
into the locking clip on the
base of the Bell Push.
2: Gently twist.
3: The backing plate will unclip.
1
Functions:
4 Selectable Melodies
1: Ding Dong (Repeat) 3: Alarm
2: Westminster 4: Ding Dong Ding
4
To select a melody for the Door Chime
1: Remove the Back Plate from the Bell
Push.
2: Press the Melody Select button.
3:The chime will play the newly selected
sound.
4: Press again to select the next melody.
Note: For Front/Back door setup, select a
different melody in one of the Bell Pushes.
CR2032
Adding Additional Chime/Bell Push:
1: Insert CR2032 battery
(Supplied) into the battery
holder.
2: Make sure the positive side
is facing upwards.
3: Replace back plate.
2
Warning: Make sure that the batteries are
replaced correctly to avoid battery failure.
Only replace with same or equivalent type.
3
1: Plug Chime into a UK 3pin
socket, 220 – 240V ~ 50Hz.
2: Switch the socket on.
Beep
Beep
1: The Chime will ‘Beep Beep’.
2: Press the Bell Push within
60 seconds to learn the
Bell Push to the chime.
3: The Chime will ring to
confirm setup.
Note: Maximum of 2
Bell Pushes can be learnt to a
single Chime for Front/Back
4
Additional Bell Push
To add an additional Bell Push to the Door Chime kit
1: Unplug the Door Chime and wait for 10
seconds.
2: Plug the Door Chime into the Socket and
switch the socket on.
3: Press both Bell Pushes within 60 seconds, to pair
the additional Bell Push to the Chime.
4: Chime will ring to confirm setup, wait 60 seconds
for Chime to exit the learn mode before repressing the
Bell Push5.
5: For Front/Back door setup, select a different melody in one of the
Bell Pushes - See Melody Selection.
Note: Maximum of 2 Bell Pushes can be learnt to a single
Door Chime.
Front Door
Back Door
New Chime
Additional Chime
To add an additional Chime unit to the Door Chime kit
1: Unplug the NEW Door Chime and wait for 10
seconds
2: Plug the Door Chime into the Socket and switch the socket On.
3: The Chime will ‘Beep Beep’ to indicate that it has entered
the Learn mode.
4: Press the Bell Push within 60 seconds, to pair the additional
Chime to the Bell Push.
5: Chime will ring to confirm setup, wait 60 seconds for the Chime
to exit the learn mode before repressing the Bell Push.
Beep
Beep
BY103
1: Push Button 5: Plug-through Chime
2: Melody Selector 6: Speaker
3: Bell Push Battery
4: Signal Sent LED
1:
2:
4:
:3
6:
5:
3
Plug-in any standard electrical product,
220–240V ~50Hz.
e.g. table light, upto a Max Load of
1000W
Avoid using low voltage Transformers, as
this may reduce the operating range of
the Door Chime
Plug-through Socket:
Melody selection:
™Plug-through
Wire Free Chime Kit
Produktspecifikationer
| Varumärke: | Byron |
| Kategori: | Dörrklocka |
| Modell: | BY103 |
Behöver du hjälp?
Om du behöver hjälp med Byron BY103 ställ en fråga nedan och andra användare kommer att svara dig
Dörrklocka Byron Manualer
8 Oktober 2024
5 Oktober 2024
5 Oktober 2024
4 Oktober 2024
1 Oktober 2024
30 September 2024
29 September 2024
27 September 2024
24 September 2024
23 September 2024
Dörrklocka Manualer
- LSC SmartConnect (Action)
- Hama
- Grothe
- Swissvoice
- GlobalTronics
- Merlin
- Somfy
- Foscam
- Cata
- Jacob Jensen
- Friedland
- Velleman
- Eken
- Ubiquiti
- Hombli
Nyaste Dörrklocka Manualer
7 April 2025
30 Mars 2025
30 Mars 2025
30 Mars 2025
30 Mars 2025
12 Mars 2025
22 Februari 2025
20 Februari 2025
19 Februari 2025
4 Februari 2025