Byron BY112 Bruksanvisning

Byron Dörrklocka BY112

Läs gratis den bruksanvisning för Byron BY112 (4 sidor) i kategorin Dörrklocka. Guiden har ansetts hjälpsam av 9 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 5 recensioner. Har du en fråga om Byron BY112 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/4

™Plug-in & Portable

Wire Free Chime Kit

1: Place a small flat screwdriver

into the locking clip on the

base of the Bell Push

2: Gently twist

3: The backing plate will unclip

Functions:

1: Push Button 5: Portable Chime

2: Melody Selector 6: Speaker

3: Bell Push Battery 7: Plug-in Chime

4: Signal Sent LED

BY112

34 1: plug Chime into a UK 3pin

socket, 220 – 240V ~ 50Hz.

2: Switch the socket on.

Beep

1: The Chime will ‘Beep Beep’.

2: Press the Bell Push within

60 seconds to learn the

Bell Push to the chime.

3: The Chime Will Ring to

confirm setup, wait 60

seconds for the Chimes

to exit the learn mode

before repressing the Bell

Push.

4: Replace the battery cover.

Note: Maximum of 2 Bell

Pushes can be learnt to a

single Chime for Front/Back

Door use.

To select a melody for the Door Chime

1: Remove the Back Plate from the Bell

Push

2: Press the Melody Select button.

3:The chime will play the newly selected

sound

4: Press again to select the next melody.

Note: For Front/Back door setup, select a

different melody in one of the Bell Pushes.

CR2032

New Chime

Adding Additional Chime/Bell Push:

Additional Chime

To add an additional Chime unit to the Door Chime kit

1: Remove the batteries or unplug your NEW Door Chime and wait

for 10 seconds.

2: Replace the batteries, making sure the Positive/Negative

terminals match the internal markings or plug the Door Chime into

the Socket and switch the socket on.

3: The Chime will ‘Beep Beep’ to indicate that it has entered

the Learn mode.

4: Press the Bell Push within 60 seconds, to pair the additional

Chime to the Bell Push.

5: Chime will ring to confirm setup, wait 60 seconds for the Chime

to exit the learn mode before repressing the Bell Push.

Additional Bell Push

To add an additional Bell Push to the Door Chime kit

1: Remove the batteries or unplug your new Door

Chime and wait for 10 seconds.

2: Replace the batteries, making sure the

Positive/Negative terminals match the internal

markings or plug the Door Chime into the Socket

and switch the socket.

3: The Chime will ‘Beep Beep’ to indicate that it has

entered the Learn mode.

4: Press both Bell Pushes within 60 seconds, to pair the additional

Bell Push to the Chime.

5: Chime will ring to confirm setup, wait 60 seconds for Chime to exit

the learn mode before repressing the Bell Push. For Front/Back

door setup, select a different melody in one of the Bell Pushes -

See Melody Selection.

Note: Maximum of 2 Bell Pushes can be learnt to a single

Door Chime.

Beep

Front Door

Back Door

31: Remove the battery cover of

the Door Chime.

2: Insert 3 X 1.5V Size ‘AA’

batteries (Not Supplied).

3: Make sure the

Positive/Negative terminals

match the internal markings.

3 x 1.5V ‘AA’

4 Selectable Melodies

1: Ding Dong (Repeat) 3: Alarm

2: Westminster 4: Ding Dong Ding

1: Insert CR2032 battery

(Supplied) into the battery

holder.

2: Make sure the positive side

is facing upwards.

3: Replace back plate.

Warning: Make sure that the batteries are

replaced correctly to avoid battery failure.

Only replace with same or equivalent type.

Produktspecifikationer

Varumärke:	Byron
Kategori:	Dörrklocka
Modell:	BY112
Vikt:	290 g
Bredd:	60 mm
Djup:	128 mm
Höjd:	25 mm
Hållbarhetscertifikat:	RoHS
Antal per paket:	48 stuk(s)
Inspänning:	18 - 72 V
Uteffekt:	60 W
Utström:	12 A
Spännande:	5 V