Caliber MCD 773 Bruksanvisning
Läs gratis den bruksanvisning för Caliber MCD 773 (34 sidor) i kategorin bilradio. Guiden har ansetts hjälpsam av 7 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 4 recensioner. Har du en fråga om Caliber MCD 773 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/34

E N G L I S H
1
S P E C I F I C A T I O N S
GENERAL
Power Supply DC 11 -14,4V
Polarity Negative Ground
Speaker impedance 4 ohms
Power Output 4 x 70W
DVD / CD PLAYER
Usable disc DVD+/-R, DVD+/-RW, CD, CD-R,
CD-RW
Sampling frequency
No of quantization bits
Frequency 20-20,000Hz
Number of channels 2 stereo
S/N Ratio 90dB
RADIO SECTION
FM
Frequency Range 87.5-108 Mhz
Usable Sensitivity Better than 15dB at S/N 30 dB
Stereo Separation 25 dB at 1KHz
S/N Ratio 50 dB
AM / MW
Frequency Range 522-1620 Khz
Usable Sensitivity Better than 40dB
S/N Ratio 40 dB
REMARK :
Specifications subject to change without notice.
1. MUTE / POWER
2. EJECT
3. PANEL RELEASE
4. AUDIO MENU BUTTON / CD, DVD OK. BUTTON
5. MODE
6. ENCODER VOLUME
7. 3,5MM A/V IN JACK
8. SUBWOOFER / TUNER AF
9. 2 ZONE / TUNER TA
10. 1X-BASS / TUNER PTY
11.TUNER PS AS / CD SET-UP / DVD OSD SET-UP
12.TUNER M1 MEMORY 1 / CD PAUSE PLAY / DVD PAUSE PLAY
13.TUNER M2 MEMORY 2 / CD STOP / DVD STOP
14.TUNER M3 MEMORY 3 / CD REPEAT OFF, REPEAT TRACK, REPEAT
DISC / DVD REPEAT OFF, REPEAT CHAPTER, REPEAT TITLE
15.TUNER M4 MEMORY 4 / CD RANDOM FOLDER / DVD SHORT
PRESS M4 --> DVD MENU
16.TUNER M5 MEMORY 5
17.TUNER M6 MEMORY 6 / DVD AUDIO
18. DISPLAY MENU
19.TUNER BAND
20.TUNER SEEK UP TUNE UP / CD FILE/TRACK UP FAST FORWARD /
DVD NEXT FAST FORWARD
21.TUNER SEEK DOWN,TUNE DOWN / CD FILE/TRACK DOWN
FAST BACKWARD / DVD BACK FAST BACKWARD

E N G L I S H
2
1. Insert mounting bracket into the
dashboard, and bend the mounting
tabs out with a screwdriver. (Make
sure that lock lever is flush with
the mounting bracket. Not
projecting outward)
2. Secure the rear of the unit After
fixing mounting bolt and power
connector, fix the rear of the unit
to the car body by rubber cushion.
3. Insert trimplate
D I S C P L AY
PRECAUTIONS
• Use only in a 12-volt DC negative-ground electrical system.
• Disconnect the vehicle's negative battery terminal while mounting and connecting the unit.
• When replacing the fuse, be sure to use one with an identical amperage rating.
• Using a fuse with a higher amperage rating may cause serious damage to the unit.
• DO NOT attempt to disassemble the unit. Laser beams from the optical pickup are dangerous to the eyes.
• Make sure that pins or other objects do not get inside the unit; they may cause malfunctions, or create safety
hazards such as electrical shock or laser beam exposure.
• If you have parked the car for a long time in hot or cold weather, wait until the
temperature in the car become normal before operating the unit.
• Keep the volume at a level at which you can hear outside warning sounds (horns
sirens, etc.).
CD NOTES
• Playing a defective or dusty CD can cause dropouts in sound.
• Hold CDs as illustrated.
• DO NOT touch the unlabeled side.
• DO NOT attach any seal, label or data protection sheet to either side of a disc.
• DO NOT expose a CD to direct sunlight or excessive heat.
• Wipe a dirty CD from the center outward with a cleaning cloth.
• Never use solvents such as benzine or alcohol.
• This unit cannot play 3-inch ( 8cm ) CDs.
• NEVER insert a 3-inch CD contained in the adapter or an irregularly shaped CD.
• The unit may not be able to eject it, resulting in a malfunction.
BEFORE OPERATION
• DO NOT raise the volume level too much, as this will block outside sounds, making
driving dangerous.
• Stop the car before performing any complicated operation.
CAUTION
DO NOT open covers and do not repair by yourself. Consult the dealer or an experienced technician for help.
INSTALLATION PROCEDURES
First complete the electrical connections, and then check them for correctness.
ANTI-THEFT SYSTEM
This unit is equipped with a detachable
panel.
Removing this panel makes the radio
totally inoperable.
REMOVING THE PANEL
1. Switch off the power of the unit.
2. Remove the detachable panel (REL
button).
3. Gently press the button of the case
and open the cover. Place the panel
into the case and take it with you
when you leave the car.
INSTALL DETACHABLE PANEL
1.Fix right part of face plate in the right
part of panel slot of the unit.
2.Press down the left side of the face
plate until it clicks into the panel slot
of the unit.
REMOVE THE UNIT
Switch of the power of the unit.
1. Remove the panel and the trim plate.
2. Insert both T-Keys into hole in front of
the set until they lock.
3. Pull out the unit.

W I R I N G D I A G R A M - A U D I O / V I D E O C O N N E C T I O N S
3

E N G L I S H
4
W I R I N G D I A G R A M - P O W E R / S P E A K E R S
( I S O + S M A L L C O N N E C T O R )

PANE L OPE N/C LOS E OPE RATI ON
This unit is equipped with the most advanced full logic motorized slide down system.You can enjoy this advance
technology with just a single press of the “OPEN” button Please read carefully the following operation instruction
before operating the unit.
OPEN / CLOSE THE PANEL
Press the Open button to slide down (open) a closed panel or to slide up (close) an opened panel.
LOADING A CD
When the panel is in the slide down position, the disc slot becomes accessible. Insert a CD through the disc slot, the
CD will be automatically loaded and the panel will also close automatically & playback will begin. If no CD is inserted,
press Open button again to slide up(close) the panel.
EJECTING A CD
Press Open button to slide down the panel, if a CD is loaded, it will be ejected automatically. No further key press is
needed. If the ejected CD is not being removed, after 10 seconds it will be reloaded automatically. And the panel will
automatically slide up after disc has been reloaded.Warning : If the ejected disc remains in the slot, the Open button
will not function, so closing the panel by using Open button is prevented unless the disc is removed or reloaded.
CAUTION
A) Please always use the “OPEN” button to slide up/ down the front panel. Please never try to slide up or down the
front panel manually, this will cause serious & permanent damage to the slide down mechanism, and this will void the
warranty.
B) Please do not try to detach / remove the front panel ( by pressing the detach button ) or attach the front panel
when the panel is in the slide down position.This may cause serious & permanent damage to the unit & panel. Only
attach or detach the front panel when the panel is in the slide up position.
5

E N G L I S H
6
C O N T R O L P A N E L F U N C T I O N

R E M O T E F U N C T I O N S
7

E N G L I S H
8

BA SI C OPE RATI ONS
3) PANEL RELEASE BUTTON (REL)
Press this button to remove the control panel.
1) POWER ON/OFF BUTTON
Long press the POWER button or Short Press any other button on the front of the unit (except the Open/Eject) to
turn On the unit. Long press the POWER button to turn Off the unit.
1) MUTE BUTTON
Short Press the MUTE button to mute the audio output, and “Mute” will appear on the display. Press the mute button
again to restore the audio output to the previous level.
Please refer to the related description in “Audio Operation of Sub-woofer” for details operation of the
Subwoofer control !
The Subwoofer Level and Low Pass Filter control will only appear in the Audio Menu only if the Subwoofer
function is currently activated 'On”.
8) SUB-WOOFER (SUB-W)
Long Press the SUB-W button to activate the Sub-woofer function On, and “Sub-woofer” will appear on the LCD
display for 3 seconds. press the SUB-W button again to turn off the Sub-woofer function.
10) iX-BASS BUTTON (iX-Bass )
Long Press the iX-Bass button to turn on the IX-Bass function, and “iX-Bass” will appear in the LCD display for 3
seconds. Press the iX-Bass button again to turn off the IX-Bass function
Please refer to the related description in “Audio Operation of iX-Bass” for details operation of iX-Bass
control
The IX-Bass Boost Level control will only appear in the Audio Menu only if the iX-Bass function is currently
activated 'On”.
5) MODE BUTTON (MODE)
Short Press the MODE button to select a different mode of operation as indicated on the display panel.Available modes
include Tuner, DVD, Card(SD/MMC Card),AV IN-1 and AV IN -2
6) ENCODER VOLUME BUTTON
To increase the volume, rotate the volume control knob clockwise.To decrease the volume, rotate the volume control
knob counter clockwise.When the volume is adjusted, the volume level is shown on the display panel as a number
ranging from 00 (lowest) to 46 (highest).
FRONT PANEL A/V IN JACK
The unit is allowed to connect with external Audio / Video system such
like Digital Camera or Game Console.You can connect the external A/V
system through the A/V in jack on front panel.After connect with
external A/V system, pressing mode to “A/V In” to enjoy this external
A/V system on this unit.
The unit only supports the 3.5mm A/V Jack Pin Assignment shown as the diagram.
The unit supports A/V out thrue the A/V Jack on front panel. For more details of
operation, please refer to “Menu operation-AV Jack”.
9

DATE SET
Once in Date Set mode, User can use the Encoder Vol Knob to adjust the Date / Month / Year. Short press the AUDIO
button to confirm the entry and move to the next entry.
CLOCK
The time of the clock is set to 12:00 by default. User can adjust the time by rotate the Encoder Vol knob clockwise to
adjust the minute and rotate the Encoder Vol knob anticlockwise
to adjust the hour.
If the unit is equipped with the OPTIONAL RDS Function, the clock will be automatically updated by the RDS
roadcasting, provided if the RDS broadcast does include the clock information ( RDS CT FUNCTION )
TIME FORM
"12H" is the default setting. User can use the Encoder Vol Knob to choose the Time Format between “12 Hours” & “24
Hours”
AV JACK
The panel AV Jack is default as “AV In” source. User can use the Encoder Vol Knob to select “OUT”. Once “OUT” is
selected, the panel AV jack is changed as an AV OUTPUT ( AV OUT ) of the Audio / Video Signal of this unit's Built-in
DVD player.
This AV Out selection is useful for user by simply plug and connect to any external TFT system without any
extra installation.
CAMERA
“OFF” is set as default. If user connected a back up camera system to this unit, user should choose Camera “ON” mode.
Once “ON” is selected, & the vehicle is in Reverse Gear ( Backup mode ), the front in-dash TFT display will automatically
switch to Back Up Camera Video signal regardless whatever mode is currently displayed on the front in-dash TFT.
If connected to a back up camera system but this option is selected to “OFF” mode, User still can press the
mode button to switch “AV In 1” to display the Back Up Camera Video on the front in-dash TFT.
TUNER SET
User can use the Encoder Vol Knob to select between Local or Distance mode.This feature is used to designate the
strength of the signals at which the radio will stop during automatic tuning. "Distance" is the default setting, allowing the
radio to stop at a broader range of signals.To set the unit to select only strong local stations during automatic tuning,
rotate the Encoder Vol Knob button until "Local" appears on the display.
TUNER AREA
User can use the Encoder Vol Knob to select the frequency spacing which is most appropriate for the area this unit is
used in, U.S.A. South America, Europe or Oirt. (Russia Band)
BEEP TONE
The beep tone feature allows the selection of an audible beep tone when a button is pressed. "BEEP TONE On" is the
default setting. Rotate the Encoder Vol Knob to select the "BEEP TONE Off" option
PROGRAMMABLE TURN-ON VOLUME (VOL PGM)
This option allows the adjustment of the volume level of the radio will automatically assume when turning on. "VOL
PGM 12" is the default setting.To program a specific turn on volume level, use the Encoder Vol Knob to select
"VOLUME LEVEL” within 5 seconds.
REAR SPEAKER ON/OFF (REAR SPK)
Rear speaker is set to 'ON' by default. If OFF is selected, the rear speaker's audio output will be TURNED OFF.This
function is useful while listening with the HEADPHONE and user doesn't need Rear Speakers sounds output through
rear speakers. Select “ON” to reactivate the rear speakers sound output
:When the Rear Speaker is 'OFF', the Audio Function, 'FADER', will not be functional
INTER AMPLIFIER ON/OFF(INTER AMP)
This is a option selection for user to turn the unit's built-in Amplifier system on or off.“OFF” is the default setting.This
option is useful for user if connected to an external Amplifier & the user does not want audio output of the built-in
amplifier system.
11

E N G L I S H
12
DUAL ZONE OP ERAT ION
“2-ZONE” DUAL A/V ZONE MULTI ENTERTAINMENT OPERATION:
This unit is equipped with the most advanced “Dual A/V Zone” feature.This function is useful if the user would like to select
different modes of the Audio and Video (AV) output source for Front and Rear Speakers and TFT Screens. For example, user
can select to listen to Tuner music for front speakers and rear speaker for DVD movie.And if the user has One or more
TFT screens installed in the rear seat or inside the Car, the Dual A/V Zone function allow the users to enjoy TWO different
Video sources. For example, on the front in-dash Built-In TFT screen can display the video from the Game Console and the
other screen in the rear seat can display video from DVD Movie or other A/V source.The detail operation as follow:
ON/OFF OPERATION
-“Off” is the default setting.
- Long press the “2-Zone” button on the control panel or remote control to switch between Dual Zone On or Off.The
“2-Zone” will appear on the LCD after Dual Zone is selected “on”.
TO SELECT FRONT / REAR AV SOURCES
-Once “ON” is selected, Short Press the “AUDIO” button repeatedly to change between the F-Zone (Front ) and the R-
Zone (Rear) sources.
- If Front Zone “F-Zone” is selected, user have 10 seconds to use the Volume UP / DOWN button to navigate through
different modes:Tuner > DVD > AV - In are available for selection for Front AV Output.
- If Rear Zone “R-Zone” is selected, user have 10 seconds to use the Volume UP / DOWN button to navigate through
different modes:Tuner > DVD > AV - In are available for selection for Rear AV Output
- If no selection is being made within 5 seconds, the unit will resume to the previous mode.
TO OPERATE FUNCTION OF FRONT / REAR SOURCES
- The Front Panel & Remote control, is defaulted to control the FRONT source's function / operation.
- When DUAL ZONE is turned “ON”, the Mode button is used to change between the Front Source & Rear Source.
Press the mode button repeatedly to change between Front and Rear
- The LCD will display the Rear Source mode for 10 seconds. User has 10 seconds to make the desired operation on the
Rear Source's function on the Front Panel or Remote The LCD will automatically switch back to the Front Source after
10 seconds.And the Front Panel and Remote now is resumed to operate for Front Source's function again.
THE DEFAULT SETTING WHEN DUAL ZONE IS “ON”
- When DUAL ZONE is turned on, the audio output will be muted for about 1 second.
- The default source / mode for Front ZONE is Tuner & for Rear ZONE is “DVD”
- The default Volume level is “12” for both Front & Rear ZONE audio output. (or the Volume Level set as VOL PGM Level
set in the Menu)
- The LCD display is defaulted to display the Front Mode.
- When Dual Zone is “ON”, the audio functions Bass / Treble / Middle / Balance / Fader / Sub-woofer / iX-bass will not be
available.
THE DEFAULT SETTING WHEN DUAL ZONE IS IN “OFF” MODE
- The default audio output reverts to what the user selected for the FRONT Zone source when DUAL ZONE IS “OFF”.
For example:When the DUAL Zone is “ON “, user has selected DVD for Front ZONE & Tuner for Rear ZONE.Once
DUAL ZONE is turned “OFF”,Audio Output for all 4 speakers becomes “DVD” mode.
A UDIO OPE RATI ON
AUDIO MENU
Short Press “AUDIO“ button to access the Audio Menu. User can navigate thru the Audio Menu items by pressing the /
“AUDIO” button repeatedly,or by pressing the Tuning Up or Tuning Down Button. Once the desired menu item appears on
the display, adjust that option by using the encoder volume knob within 5 seconds.The following menu items can be adjusted
as described above.The unit will automatically exit the Audio Menu after five seconds of inactivity.
SUBWOOFER
Sub-woofer (Level)
User has 5 seconds to use the encoder volume knob to adjust the Sub-woofer lever from '00' to
The Sub-woofer level control is only applicable if the unit is equipped with the optional subwoofer
line out,and only if the unit is connected to an optional sub-woofer speaker.
The Sub-woofer level control option will only appear in the Audio Menu if the “Sub-woofer”
function is activated “ON” by pressing the “Sub-w” button on control panel.
Produktspecifikationer
Varumärke: | Caliber |
Kategori: | bilradio |
Modell: | MCD 773 |
Behöver du hjälp?
Om du behöver hjälp med Caliber MCD 773 ställ en fråga nedan och andra användare kommer att svara dig
bilradio Caliber Manualer
8 Januari 2025
13 Oktober 2024
12 Oktober 2024
12 Oktober 2024
10 Oktober 2024
7 Oktober 2024
6 Oktober 2024
3 Oktober 2024
27 September 2024
22 September 2024
bilradio Manualer
- Akai
- Vieta
- Emphaser
- Kenwood
- Rockford Fosgate
- Skoda
- Alpine
- Focal
- Jensen
- Overmax
- Macrom
- Hifonics
- Cobra
- Crunch
- Audiovox
Nyaste bilradio Manualer
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025