Canarm BI-15RM Bruksanvisning
Canarm
ventilationskåpa
BI-15RM
Läs gratis den bruksanvisning för Canarm BI-15RM (4 sidor) i kategorin ventilationskåpa. Guiden har ansetts hjälpsam av 23 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 12 recensioner. Har du en fråga om Canarm BI-15RM eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
BI_BIRM_UserGuide Page 1 of 4
BI SERIES – UTILITY BLOWERS
Operation Instructions & Parts Manual
MODELS: BI-10 – BI-36; BI-10RM – BI-36RM
READ AND SAVE THESE INSTRUCTIONS
GENERAL SAFETY
Rotating parts on fans should not be exposed. cabinets Where these components are not protected by ductwork, or
covers, appropriate guards should be employed to restrict exposure to rotating parts. Access doors should not be
opened with the fan operating to avoid foreign objects being drawn into the system. On initial start-up a careful
inspection should be carried out to ensure no foreign material is present which could become airborne in the system.
Read carefully or installation and operation instructions before attempting to install, operate service Canarm/Delhi
BI/BI –RM series blowers. Failure to comply with instructions could result in personal injury and/or property damage.
UNIT DESCRIPTION
Canarm/Delhi BI series blowers are specifically designed as a quiet and efficient blower. The BI series incorporates a
backwardly inclined (BI) blade configuration to generate air moving performance. The BI iser es are single inlet blowers,
which have a standard CCW rotation and bottom horizontal discharge. The discharge direction may be easily altered to
any one of eight positions without removal of venturi the wheel or housing.
Complete access for motor and drive installations and servicing may be completed by partial removal of the drive
compartment cover assembly. Pre-lubricated ball bearings, motor adjustment hardware and a dynamically balanced
wheel are standard equipment. Operating temperature range is - 65 to 220 deg. F.
UNIT DESCRIPTION
Inspect unit for damage and report any shipping damage to carrier. Check all fasteners and re-tighten as required. Rotate
the blower wheel by hand to ensure free rotation. If rubbing occurs, loosen the inlet venturi bolts, re-position the venturi
to establish clearance, re-tighten bolts.
FIGURE 1
Produktspecifikationer
| Varumärke: | Canarm |
| Kategori: | ventilationskåpa |
| Modell: | BI-15RM |
Behöver du hjälp?
Om du behöver hjälp med Canarm BI-15RM ställ en fråga nedan och andra användare kommer att svara dig
ventilationskåpa Canarm Manualer
21 September 2025
21 September 2025
20 September 2025
20 September 2025
25 Augusti 2025
25 Augusti 2025
24 Augusti 2025
24 Augusti 2025
24 Augusti 2025
24 Augusti 2025
ventilationskåpa Manualer
- KKT Kolbe
- Giles
- Cylinda
- NAKS
- Continental Edison
- Profilo
- Cookology
- Saba
- Haier
- Euromaid
- Gasmate
- Ersa
- Elica
- Kuppersbusch
- Euro Appliances
Nyaste ventilationskåpa Manualer
23 Oktober 2025
21 Oktober 2025
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025
18 Oktober 2025
18 Oktober 2025
18 Oktober 2025
17 Oktober 2025
16 Oktober 2025