Canarm BI-16RM Bruksanvisning
Canarm
hushålls fläkt
BI-16RM
Läs gratis den bruksanvisning för Canarm BI-16RM (4 sidor) i kategorin hushålls fläkt. Guiden har ansetts hjälpsam av 17 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 9 recensioner. Har du en fråga om Canarm BI-16RM eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
BI_BIRM_UserGuide Page 1 of 4
BI SERIES – UTILITY BLOWERS
Operation Instructions & Parts Manual
MODELS: BI-10 – BI-36; BI-10RM – BI-36RM
READ AND SAVE THESE INSTRUCTIONS
GENERAL SAFETY
Rotating parts on fans should not be exposed. Where these components are not protected by ductwork, cabinets or
covers, appropriate guards should be employed to restrict exposure to rotating parts. Access doors should not be
opened with the fan operating to avoid foreign objects being drawn into the system. On initial start-up a careful
inspection should be carried out to ensure no foreign material is present which could become airborne in the system.
Read installation and operation instructions carefully before attempting to install, operate or service Canarm/Delhi
BI/BI –RM series blowers. Failure to comply with instructions could result in personal injury and/or property damage.
UNIT DESCRIPTION
Canarm/Delhi BI series blowers are specifically designed as a quiet and efficient blower. The BI series incorporates a
backwardly inclined (BI) blade configuration to generate air moving performance. The BI series are single inlet blowers,
which have a standard CCW rotation and bottom horizontal discharge. The discharge direction may be easily altered to
any one of eight positions without removal of the wheel venturi or housing.
Complete access for motor and drive installations and servicing may be completed by partial removal of the drive
compartment cover assembly. Pre-lubricated ball bearings, motor adjustment hardware and a dynamically balanced
wheel are standard equipment. Operating temperature range is - 65 to 220 deg. F.
UNIT DESCRIPTION
Inspect unit for damage and report any shipping damage to carrier. Check all fasteners and re-tighten as required. Rotate
the blower wheel by hand to ensure free rotation. If rubbing occurs, loosen the inlet venturi bolts, re-position the venturi
to establish clearance, re-tighten bolts.
FIGURE 1
Produktspecifikationer
| Varumärke: | Canarm |
| Kategori: | hushålls fläkt |
| Modell: | BI-16RM |
Behöver du hjälp?
Om du behöver hjälp med Canarm BI-16RM ställ en fråga nedan och andra användare kommer att svara dig
hushålls fläkt Canarm Manualer
22 September 2025
21 September 2025
21 September 2025
21 September 2025
20 September 2025
20 September 2025
20 September 2025
20 September 2025
11 September 2025
10 September 2025
hushålls fläkt Manualer
- Wahoo
- NuTone
- Bayside
- Termozeta
- Grunkel
- InLine
- Mellerware
- Flex
- Oceanic
- MPM
- Big Ass Fans
- Rotel
- BISWIND
- DeWalt
- Scarlett
Nyaste hushålls fläkt Manualer
23 Oktober 2025
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025
15 Oktober 2025
15 Oktober 2025
14 Oktober 2025
14 Oktober 2025
14 Oktober 2025
12 Oktober 2025