Cardo Q-Solo Bruksanvisning
Cardo
Inte kategoriserad
Q-Solo
Läs gratis den bruksanvisning för Cardo Q-Solo (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 1.5 recensioner. Har du en fråga om Cardo Q-Solo eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
Q-solo™
Manual
scala
rider® Q-solo
1 INTRODUCTION
2 CHARGING THE SCALA RIDER
3 GETTING STARTED: 3.1 STATUS LIGHTS, 3.2 GENERAL FUNCTIONS, VOX ACTIVATION3.3
4 PAIRING AND USING A MOBILE PHONE, GPS DEVICE OR ANY MUSIC PLAYERS:
4.1 PAIRING
BLUETOOTH
, 4.2 MAKING AND RECEIVING PHONE CALLS, LISTENING TO MUSIC VIA4.3 A2DP
5 TROUBLESHOOTING
6 SUPPORT
INDEX
I M P O R T A N T :
This is version 1.0 o f the User
Manual. Please note, that our
manual is periodically updated
on the Cardo website to include
the ver y latest featu res and
functions of your new scala rider.
➊ ➋ ➌
➍
➎
➏
1. Power Button
2. LED Indicator
3. Music / Mobile Button
4. Volume Up
5. Charging
6. Volume Down
INTRODUCTION
Thank you for choosing the scala rider Q-solo Bluetooth® headset
for motorcycle helmets. This manual will help you set up, congure
and operate it.
1
CHARGING THE SCALA RIDER
Make sure that your scala rider is fully charged for at least 4 hours
before initial use.
Charging with a 5v wall charger is faster than charging with a
computer USB port.
• LED ON – Charging RED
• LED OFF – Charging completeRED
The scala rider Q-solo is waterproof and dustproof. However,
when in use, the USB silicone cover should be kept tightly closed
to prevent moisture from entering the unit.
2
GETTING
STARTED
3.1 STATUS LIGHTS
None scala rider is OFF
The BLUE LED ashes once every 3 seconds Standby mode. No active audio sources
The BLUE LED ashes twice every 3 seconds Active mode – Call in progress / music or other audio source is ON
The RED LED ashes once every 3 seconds Standby mode – Battery is low
The RED LED ashes twice every 3 seconds Active mode – Battery is low
Solid RED Charging
3
scala
rider® Q-solo
3.2 GENERAL FUNCTIONS
Power ON / OFF Press for 2 seconds
ON: 3 BLUE ashes + Ascending tone OFF: 3 RED ashes + Descending tone
Volume Tap or to adjust and set volume of current audio source
Mute Tap and simultaneously
Battery Check In Standby, press for 2 seconds:
• LED = Full charge • LED = Half charge • LED = Almost emptyBLUE PURPLE RED
3.3 VOX ACTIVATION
Your scala rider oers a voice operated feature for hands-free
operation.
Answer a call Speak any word loudly into the microphone
Reject a call Remain silent for about 15 seconds
4.1 PAIRING BLUETOOTH
1. Make sure is enabled on your phone/GPS/MP3 player.Bluetooth
2. Check the scala rider is in Standby mode (single LED ashes every 3 seconds).
3. Press for at least 5 seconds until the LED ashes once every 3 secondsBLUE
4. Search for devices on your phone/GPS/MP3 player by following the device’s Bluetooth
instructions.
5. After a few seconds the device will list “scala rider Q-solo ”. Select it.
6. If prompted for a PIN or Passkey, enter 0000 (four zeros).
7. The device will conrm that pairing has succeeded and will ash for 2 secondsPURPLE
8. If pairing is not completed within 2 minutes, the scala rider will return to Standby mode.
PAIRING AND USING A MOBILE PHONE, GPS DEVICE OR ANY MUSIC PLAYER
To connect your scala rider to a device you must rst pair them. Once paired, they will Bluetooth
automatically recognize each other whenever they are within range (10m / 33ft).
Your scala rider has channel for connecting to a mobile phone, GPS device Bluetooth
and a music player with A2DP.
NOTES:
• Not all Bluetooth mobile phones can broadcast
Bluetooth Stereo music (A2DP), even if the phone
has a music player function. Consult your mobile
phone’s User Manual for more information.
• Not all GPS devices allow connection to Bluetooth
Bluetooth audio devices. Consult your GPS User
Manual for more information.
• After pairing, you may need to tap to connect
the scala rider .
4.2 MAKING AND RECEIVING PHONE CALLS
Answer a call Tap or say any word loudly to answer by VOX
Reject a call Remain silent for 15 seconds, or press and hold for
2 seconds
End a call Tap
Voice Dial*
(if supported by
mobile phone)
Tap and simultaneously and follow the prompt
from the mobile
Redial* Press and for 2 seconds
*This feature is not available during mobile calls
4.3 LISTENING TO MUSIC VIA A2DP
Available only on compatible Bluetooth audio sources
Play In Standby, tap
Pause/Stop Press for 2 seconds
Next Track With music ON, tap
Previous Track* With music ON, double tap
*With some phones you may need to repeat this action
TROUBLESHOOTING
Reboot If your scala rider stops responding, reset it by turning it o and then on again (press for 2 seconds).
Reset Pairing
(Deletes paired device)
1. In Standby, press for 5 secs until LED ashes / .RED BLUE
2. Press for 2 seconds until LED ashes 5 times in .PURPLE
Unresponsive Device Please connect to your charging cable for 30 seconds to allow the device to reset.
4
5
6
USA and Canada: 1-800-488-0363
International: +49 89 450 36819
CONTACT & SUPPORT
1
MAN00001 QG onlinesolo EN 001
support@cardosystems.com
cardosystems.com
www
Produktspecifikationer
| Varumärke: | Cardo |
| Kategori: | Inte kategoriserad |
| Modell: | Q-Solo |
Behöver du hjälp?
Om du behöver hjälp med Cardo Q-Solo ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Cardo Manualer
4 Januari 2025
8 December 2024
2 Oktober 2024
24 September 2024
25 Augusti 2024
23 Augusti 2024
16 Augusti 2024
15 Augusti 2024
13 Augusti 2024
2 Augusti 2024
Inte kategoriserad Manualer
- Kiev
- Stinger
- La Crosse Technology
- Babysense
- Xaoc
- Gazelle
- Rossmax
- 3Doodler
- Hercules
- ColorKey
- Kohler
- Goobay
- NEP
- Huslog
- MGL Avionics
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025