Carson MagniLamp GN-55 Bruksanvisning
Läs gratis den bruksanvisning för Carson MagniLamp GN-55 (3 sidor) i kategorin Lampa. Guiden har ansetts hjälpsam av 7 personer och har ett genomsnittsbetyg på 3.8 stjärnor baserat på 4 recensioner. Har du en fråga om Carson MagniLamp GN-55 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/3
TM
HELPINGHANDS
2x LED LIGHTED SOLDERING AND CRAFT MAGNIFIER
GN-88
Instructions for use:
Installing Batteries
Pull open battery door (Fig. 1). Insert 2 AA batteries as shown in Fig. 2. Make sure to follow polarity indicators
marked inside battery compartment. Replace battery door (Fig. 3).
Fig. 1 Fig. 2 Fig. 3
Warning: Use only alkaline batteries. Mixing old and new, different brands or types within brands may cause
batteries to leak, overheat or explode. Keep away from fire or excessive heat. Inspect batteries for corrosion or
leakage. Insert in direction indicated. Rechargeable batteries not recommended.
Attaching Flexible Arms
Locate flexible metal arms and remove nut from end (Fig. 4). Insert end of metal arm into hole in U shaped s s s s s
base (Fig. 5-6). Reattach nut to secure arm to base (Fig. 7).s s
Fig. 4 Fig. 5 Fig. 6 Fig. 7
To Use Hands-Free
Snap adapter into base. Please note that adapter is "keyed" to fit only one way (Fig. 8). Place magnifier
handle into adapter (Fig. 9). It is also keyed and will easily "click-lock" into base when correctly inserted.
Adjust flexible arms and position lens as needed (Fig. 10).
Fig. 8 Fig. 9 Fig. 10
To Adjust Alligator Clips
Fig. 11
Loosen wing nuts to adjust position of alligator clips as desired (Fig. 11). Tighten wing nuts to lock into
place.
Using Alligator Clips
Pinch to open each alligator clip (Fig. 12) and clamp onto viewing subject (Fig. 13). Position arms as needed
to view subject under the lens (Fig. 14).
Fig. 12 Fig. 13 Fig. 14
To Activate LED Light To Remove Magnifier From Base
To turn light on, slide switch (located on side Lift lock tab outward and lift magnifier from
of magnifier handle) forward (Fig. 15). base (Fig. 16) to use as hand-held magnifier.
Fig. 15 Fig. 16
Cleaning Your Magnifier
Clean lens with a soft, clean microfiber cloth by rubbing gently in a circular motion. Moisten the lens
cloth with water if needed. Do not use harsh chemicals, solvents or abrasives as they may damage the
lens.
Note: To avoid damaging the craft magnifier, do not touch lens or plastic body with hot soldering iron.
CAUTION - FIRE HAZARD:
Keep magnifier away from direct sunlight to prevent accidental fire.
Customer Service:
If you experience any difficulties, please contact us and we will be happy to help you.
In the U.S.A. In the U.K. In the E.U.
Phone: 1-631-963-5000 Phone: +44 (0) 1938 557440 Phone: +44 (0) 1938 557440
Email: info@carson.com Email: uksupport@carson.com Email: eusupport@carson.com
For warranty information, visit www.carson.com/warranty
GN-88 / © 2020
Produktspecifikationer
| Varumärke: | Carson |
| Kategori: | Lampa |
| Modell: | MagniLamp GN-55 |
Behöver du hjälp?
Om du behöver hjälp med Carson MagniLamp GN-55 ställ en fråga nedan och andra användare kommer att svara dig
Lampa Carson Manualer
14 Augusti 2024
Lampa Manualer
- Markslöjd
- Nitecore
- Rutec
- Zuiver
- Lume Cube
- Nordride
- Theben
- Toolcraft
- Akasa
- Steren
- Tristar
- DLG
- HQ Power
- Nanlite
- Altman
Nyaste Lampa Manualer
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025