Casio Exilim EX-V7 Bruksanvisning

Casio Kamera Exilim EX-V7

Läs nedan 📖 manual på svenska för Casio Exilim EX-V7 (276 sidor) i kategorin Kamera. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/276
1
E
Digital Camera
EX-V7
User’s Guide
K825PCM1DMX
Thank you for purchasing this CASIO product.
Before using it, be sure to read the precautions
contained in this User’s Guide.
Keep the User’s Guide in a safe place for future
reference.
For the most up-to-date information about this
product, visit the official EXILIM
Website at http://www.exilim.com/.
2UNPACKING
UNPACKING
As you unpack your camera, check to make sure that all items shown below are included. If anything is missing, contact your original
retailer.
Digital Camera Rechargeable Lithium Ion Battery (NP-50) USB Cradle (CA-35)
Special AC Adaptor (AD-C52G)/AC Power Cord *Strap
USB Cable AV Cable CD-ROMs (2) Basic Reference
*The shape of the AC power
cord plug varies according to
country or geographic area. Attach strap here.
To attach the strap to the camera.
3CONTENTS
CONTENTS
UNPACKING 2
QUICK START BASICS 9
First, charge the battery . . . . . . . . . . . . . . . . . . . . . . 9
Configuring Display Language, Date,
and Time Settings . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Using a Memory Card . . . . . . . . . . . . . . . . . . . . . . . 13
Shooting a Snapshot . . . . . . . . . . . . . . . . . . . . . . . . 15
Viewing Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . 17
Shooting a Movie . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Viewing a Movie . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Deleting a File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
INTRODUCTION 22
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Read this first! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Precautions during Use . . . . . . . . . . . . . . . . . . . . . 26
GETTING READY 36
Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . 36
To load the battery 36
To charge the battery 37
Replacing the Battery 41
Battery Precautions 41
Using the Camera in another Country . . . . . . . . . . 42
Turning Power On and Off . . . . . . . . . . . . . . . . . . . 43
Using a Memory Card . . . . . . . . . . . . . . . . . . . . . . . 46
Supported Memory Cards 46
Loading a Memory Card into the Camera 48
Replacing the Memory Card 49
Formatting a Memory Card 50
Using On-screen Menus . . . . . . . . . . . . . . . . . . . . . 51
Changing the Contents of the Monitor Screen . . . 53
If you lose your way... . . . . . . . . . . . . . . . . . . . . . . . 54
B
4CONTENTS
SHOOTING A SNAPSHOT 56
Specifying the Recording Mode . . . . . . . . . . . . . . . 56
Holding the Camera Correctly . . . . . . . . . . . . . . . . 57
Shooting a Snapshot . . . . . . . . . . . . . . . . . . . . . . . . 59
Specifying Image Size 62
Specifying Image Quality 63
Turning Off the AF Assist Lamp 64
Using the easy Mode 65
Snapshot Shooting Precautions 67
Auto Focus Restrictions 68
Shooting with Zoom . . . . . . . . . . . . . . . . . . . . . . . . 69
Using Flash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Using the Self-Timer . . . . . . . . . . . . . . . . . . . . . . . . 77
Using Continuous Shutter . . . . . . . . . . . . . . . . . . . 79
Selecting the Continuous Shutter Mode 79
Recording with Normal-speed Continuous Shutter,
High-speed Continuous Shutter, and Flash
Continuous Shutter 80
Continuous Shutter Precautions 80
Adding Audio to a Snapshot . . . . . . . . . . . . . . . . . 81
Manually Configuring Shutter Speed and
Aperture Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . 84
SHOOTING A MOVIE 90
Movie Image Quality . . . . . . . . . . . . . . . . . . . . . . . . 90
Shooting a Movie . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Movie Recording Precautions 92
Using Short Movie . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Using Past Movie . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
USING BEST SHOT 96
Taking Bright Images without Flash . . . . . . . . . . 102
Shooting Images of Business Cards and
Documents (Business Shot) . . . . . . . . . . . . . . . . . 103
Restoring an Old Photograph . . . . . . . . . . . . . . . . 106
Recording Snapshots into a Multi-image
Layout (Layout Shots) . . . . . . . . . . . . . . . . . . . . . . 109
Auto Tracking a Moving Subject
(Auto Framing) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
B
8CONTENTS
APPENDIX 251
General Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . 251
Monitor Screen Contents . . . . . . . . . . . . . . . . . . . 253
Menu Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . 255
Indicator Lamps . . . . . . . . . . . . . . . . . . . . . . . . . . . 258
Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . 261
Finding the Problem and Fixing It 261
If you have problems installing the USB driver... 266
Display Messages 267
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 269
B
24 INTRODUCTION
MMCplus is a trademark of the MultiMediaCard Association.
Adobe and Reader are either registered trademarks or
trademarks of Adobe Systems Incorporated in the United
States and/or other countries.
Ulead, Ulead VideoStudio, and Movie Wizard are trademarks
of Ulead Systems, Inc.
HOTALBUM and the HOT ALBUM logo are registered
trademarks or trademarks of Konica Minolta Photo Imaging,
Inc., and licensed to HOTALBUMcom, Inc.
EXILIM, Photo Loader, and Photo Transport are registered
trademarks or trademarks of CASIO COMPUTER CO., LTD.
Photo Loader with HOT ALBUM was developed based on
HOT ALBUM, which is copyrighted by HOTALBUMcom, Inc.,
and Photo Loader, which is copyrighted by CASIO
COMPUTER CO., LTD. All copyrights and other rights revert
to original copyright holders.
All other company or product names mentioned herein are
registered trademarks or trademarks of their respective
companies.
Any and all unauthorized commercial copying, distribution, and
copying of the bundled software over a network are prohibited.
29 INTRODUCTION
Disassembly and Modification
Never try to take the camera apart or modify it in any way.
Doing so creates the risk of electric shock, burn injury, and
other personal injury. Be sure to leave all internal inspection,
maintenance, and repair up to your dealer or nearest CASIO
authorized service center.
Locations To Be Avoided
Never leave the camera in any of the following types of
locations. Doing so creates the risk of fire and electric shock.
Areas subject to large amounts of humidity or dust
Food preparation areas or other locations where oil smoke
is present
Near heaters, on a heated carpet, in areas exposed to
direct sunlight, in a closed vehicle parked in the sun, or
other areas subject to very high temperatures
Never place the camera on an unstable surface, on a high
shelf, etc. Doing so can cause the camera to fall, creating the
risk of personal injury.
Backing Up Important Data
Always keep backup copies of important data in camera
memory by transferring it to a computer or other storage
device. Note that data can be deleted in the case of camera
malfunction, repair, etc.
Memory Protection
Whenever replacing the battery, be sure to follow the correct
procedure as described in the documentation that comes with
the camera. Incorrectly replacing the battery can result in
corruption or loss of data in camera memory.
Rechargeable Battery
Use only the specified charger unit or the specified device to
charge the battery. Attempting to charge the battery by an
unauthorized means creates the risk of battery overheating,
fire, and explosion.
36 GETTING READY
GETTING READY
Your camera is powered by a rechargeable lithium ion battery
(NP-50).
IMPORTANT!
Use of any type of battery other than NP-50 is not
supported.
To load the battery
1. Open the battery cover.
While pressing the battery cover, slide it in the direction
indicated by the arrow.
2. Load the battery into the camera.
With the EXILIM logo on the battery facing downwards (in
the direction of the lens), hold the stopper in the direction
indicated by the arrow as you slide the battery into the
camera. Press the battery in until the stopper secures it in
place.
Charging the Battery
NP-50
Stopper
37 GETTING READY
3. Close the battery cover.
Swing the battery cover closed, and then slide it securely
into place as you press it against the camera.
The battery is not fully charged when you use the camera
for the first time after purchasing it. Use the following
procedure to charge it.
To charge the battery
1. Plug the USB cradle into a household power
outlet.
2. Make sure the camera is turned off.
If the camera is on, turn it off by closing the lens cover.
AC Adaptor
USB Cradle
AC power cord
[DC IN 5.3V]
38 GETTING READY
3. With the camera positioned so the monitor
screen is facing towards you as shown in the
illustration, place it onto the USB cradle.
The [CHARGE] lamp lights red and charging starts.
It takes about 150 minutes to achieve a full charge. Actual
charging time depends on current battery capacity,
remaining power, and charging conditions.
When charging is complete
The [CHARGE] lamp, which was lit red during charging,
changes to green.
Remove the camera from the USB cradle and unplug the AC
power cord from the power outlet.
If the [CHARGE] lamp flashes green
This indicates that charging cannot be performed because you
have just finished using the camera, or because the temperature
in your location is too hot or too cold. If this happens, wait until
the camera returns to normal temperature. When the camera
returns to a temperature where charging can be performed, the
[CHARGE] lamp will light red.
Carefully insert the camera
as far as it will go.
Cradle contact
[CHARGE] lamp
Camera contact
40 GETTING READY
Battery Power Conservation Tips
When you do not need to use the flash, select (flash off)
for the flash setting (page 72).
Enable the Auto Power Off and the Sleep features to protect
against wasting battery power when you forget to turn off the
camera (page 45).
Checking Remaining Battery Power
As battery power is consumed, a battery indicator on the monitor
screen indicates remaining power as shown below.
” indicates that battery power is low. Charge the battery as
soon as possible.
Recording is not possible when ” is indicated. Charge the
battery immediately.
IMPORTANT!
Due to differences in the power requirements of each
mode, the battery indicator may show a lower level in the
PLAY mode than what it shows in a REC mode. This is
normal, and does not indicate malfunction.
Leaving the camera for about 12 hours with no power
supplied while the battery is dead will cause its date and
time settings to be cleared. You will have to re-configure
the settings after power is restored.
Remaining
Power High Low
Battery
Indicator
Indicator
Color
Light
blue Orange Red Red
42 GETTING READY
Storage Precautions
Though a rechargeable lithium ion battery provides high
capacity in a compact configuration, long-term storage while
charged can cause it to deteriorate.
If you do not plan to use a battery for some time, fully use
up its charge before storing it.
Always remove the battery from the camera when you are
not using it. Leaving a battery in the camera can cause it to
discharge and go dead, which will require longer charging
when you need to use the camera.
Store batteries in a cool, dry place (20°C (68°F) or lower).
Note the following precautions.
The bundled AC adaptor is designed for operation with any
power supply in the range of 100V to 240V AC, 50/60Hz.
Note, however, that the shape of the power cord plug
depends on each country or geographic area. Before taking
the camera and AC adaptor along on a trip, check with travel
agent about the power supply requirements in your
destination(s).
Do not connect the AC adaptor to a power supply through a
voltage converter or similar device. Doing so can lead to
malfunction.
Extra Batteries
Taking along extra fully charged batteries (NP-50) is
recommended while on a trip in order to avoid not being able to
shoot images due to the battery going dead.
Using the Camera in another Country
52 GETTING READY
Menu Screen Operation Buttons
The following is the procedure for menu operations in a REC
mode.
1. In a REC mode, press [MENU].
This displays the menu screen.
2. Use [W
W
W
WW] and [X
X
X
XX] to select the tab where the
item you want to configure is located.
Here, we will select the “REC” tab.
3. Use [S
S
S
SS] and [T
T
T
TT] to
select the item you
want to configure and
then press [X
X
X
XX].
Example: Select “Focus” and
then press [X].
4. Use [S
S
S
SS] and [T
T
T
TT] to select the setting you want.
5. Apply the setting.
Pressing [SET] applies the selected setting and exits the
menu screen.
Pressing [W
W
W
WW] instead of [SET] applies the selected setting
and returns to the menu screen. You can then continue
configuring other settings, if you want.
To select another tab, press [W
W
W
WW], use [S
S
S
SS] to return to the
tab and then use [W
W
W
WW] and [X
X
X
XX] to switch to another tab.
IMPORTANT!
Entering the easy mode (page 65) changes display
contents to four menu items each, using larger size
characters. The easy mode also displays simple onscreen
help.
[ ]
W
W
W
WW] [X
X
X
XX Select tabs. [X] is also used to apply a setting.
[ ]
S
S
S
SS] [T
T
T
TT Select a setting option.
[SET] Applies the selected settings.
[MENU] Exits the menu screen.
53 GETTING READY
Each press of [S] (DISP) changes the contents of the monitor
screen as shown below.
REC Modes
PLAY mode
Changing the Contents of the Monitor
Screen
Indicators on Histogram on
Indicators off
Indicators on Histogram/Details on
Indicators off
68 SHOOTING A SNAPSHOT
Monitor Screen when Shooting Snapshots
The image that appears on the monitor screen is for image
composition. The actual image will be recorded at the quality
set for the image quality setting.
Subject brightness conditions can cause monitor screen
response to slow and can cause digital noise in the monitor
screen image.
Shooting Indoors under Fluorescent
Lighting
Minute flickering of fluorescent lighting can affect the
brightness or color of an image.
Auto Focus Restrictions
Proper focus may not be possible when shooting the following
types of subjects.
Solid color wall or other very low contrast subject
Strongly back lit subject
Very shiny subject
Blinds or other subject with a repeating horizontal pattern
Multiple subjects at varying distances from the camera
Subject in a dark location
Subject that is too far away for light from the AF assist lamp
to reach
Fast-moving subject
Subjects outside the focus range of the camera
Proper focus may not be possible if the camera is moved
while shooting.
An image may be out of focus even though the operation
lamp is lit green and the focus frame is green.
If you cannot focus properly, try using focus lock (page 119)
or manual focus (page 121).
74 SHOOTING A SNAPSHOT
Red-eye reduction
Using the flash to shoot at night or in a dimly lit room can cause
red spots inside the eyes of people who are in the image. This is
caused when the light from the flash reflects off of the retina of
the eye. When “ ” (Auto Flash) or “ ” (Red Eye) is
selected on the flash mode, the REC light and flash will fire,
which causes the irises in the eyes of any people in the image to
close, which reduces the chance of red eye.
IMPORTANT!
Note the following important points when using red-eye
reduction.
Red-eye reduction does not work unless the people in
the image are looking directly at the camera during the
pre-flash. Before pressing the shutter button, call out to
the subjects so they all look at the camera while the pre-
flash operation is performed.
Red-eye reduction may not work very well if the subjects
are located far away from the camera.
Checking the Flash Mode
The current flash mode is indicated on the monitor screen and
by the operation lamp when you half-press the shutter button.
You will not be able to take another flash snapshot until the
operating lamp stops flashing orange, which indicates that
charging is complete.
indicates flash will fire.
Operation Lamp
Flashes orange while the flash is charging.
B
76 SHOOTING A SNAPSHOT
1. In a REC mode, press [MENU].
2. On the “Quality” tab, select “Flash Assist” and
then press [X
X
X
XX].
3. Use [S
S
S
SS] and [T
T
T
TT] to select “Off” and then press
[SET].
When you want to use flash assist, select “Auto” here.
IMPORTANT!
Flash assist may not produce the desired result for some
types of subjects.
Any of the following can result in the flash assist effect
being canceled out.
Changing the flash intensity (page 75)
Correcting brightness (EV shift) (page 126)
Changing ISO sensitivity (page 131)
Changing the contrast setting (page 136)
Flash Precautions
The desired effect may not be obtained when the subject is
too far away or too close.
Flash charging time depends on operating conditions (battery
condition, ambient temperature, etc.) With a fully charged
battery, it takes anywhere from a few seconds to 7 seconds.
Shooting with flash turned off when lighting is dim results in a
slow shutter speed, which can cause image blur due to hand
movement. Secure the camera with a tripod, etc.
The presence of outdoor sunlight, fluorescent lighting, or
some other light source can cause abnormal image colors.
87 SHOOTING A SNAPSHOT
3. Half-press the shutter button.
The camera will focus the image in accordance with your
setting.
The shutter speed and aperture value on the monitor
screen will turn orange when you half-press the shutter
button if the image is over-exposed or under-exposed.
4. When the image is focused, press the shutter
button the rest of the way to shoot.
Shooting with Manual Exposure Settings
(M mode)
The following shows the ranges for the shutter speed and
aperture settings you can configure in the M mode.
* The camera has a built-in ND filter to limit exposure. F9.2 is
the aperture when the ND filter is being used.
NOT
E
Manual exposure is performed as if the “ISO” setting (page
131) is “ISO 64”, regardless of the current “ISO” setting.
Shutter Speed Slower Faster
60 seconds 1/800 second
Movement Blurred Frozen
Aperture (Zoom
at full wide
angle)
Wider Narrower
F3.4 F4.6/F9.2*
Focus range Narrow Wide
92 SHOOTING A MOVIE
Shooting with MOVIE BEST SHOT
With MOVIE BEST SHOT (page 96), you select the preset
scene that is closest to the one you want to shoot, and the
camera sets up for it automatically. Selecting the “Night Scene”
MOVIE BEST SHOT scene, for example, sets the camera to
shoot bright, clear images at night.
Anti Shake Movie Recording
You can also use Anti Shake to reduce the effects of hand
movement only while recording a movie (page 123). The effects
of subject movement are not limited.
Movie Recording Precautions
You cannot use flash while shooting a movie.
The camera also records audio. Note the following points
when shooting a movie.
Take care that the
microphone is not blocked
by your fingers, etc.
Good results are not
possible when the camera is
too far away from what you
are trying to record.
Operating camera buttons
while shooting can cause
button noise to be picked up
in the audio.
Shooting a very bright subject can cause a vertical band to
appear in the monitor screen image. This does not indicate
malfunction. The band will not be recorded in a snapshot, but
will be recorded in the case of a movie.
Certain types of memory cards take longer to record data,
which can cause movie frames to be dropped. “ ” and
” flash on the monitor screen during recording to let you
know when a frame has been dropped. Use of a memory card
with a maximum transfer speed of at least 10MB per second
is recommended.
Microphone (stereo)
100 USING BEST SHOT
Creating Your Own BEST SHOT Scenes
You can use the procedure below to save the setups of
snapshots or movies that you shot as BEST SHOT scenes. After
that, you can recall a setup whenever you want to use it.
1. Use the mode dial to select “ ” (BEST
SHOT) or ” (MOVIE BEST SHOT), and then
press [SET].
2. Use [S
S
S
SS], [T], [W
W
W
WW], and [X
X
X
XX] to select “BEST
SHOT” (Register User Scene) and then press
[SET].
3. Use [W
W
W
WW] and [X
X
X
XX] to select the snapshot or
movie whose setup you want to register.
4. Use [S
S
S
SS] and [T
T
T
TT] to select “Save” and then
press [SET].
Your BEST SHOT scene will be assigned the name “Recall
User Scene”, along with a scene number.
IMPORTANT!
Formatting the camera’s built-in memory (page 205)
deletes all the user BEST SHOT scene files.
For this type of
sample scene: Select this mode dial setting:
Snapshot ” (BEST SHOT)
Movie ” (MOVIE BEST SHOT)
B

Produktspecifikationer

Varumärke: Casio
Kategori: Kamera
Modell: Exilim EX-V7

Behöver du hjälp?

Om du behöver hjälp med Casio Exilim EX-V7 ställ en fråga nedan och andra användare kommer att svara dig




Kamera Casio Manualer

Kamera Manualer

Nyaste Kamera Manualer