Cat Mate 254 Electromagnetic Bruksanvisning

Cat Mate Sällskapsdjur 254 Electromagnetic

Läs gratis den bruksanvisning för Cat Mate 254 Electromagnetic (3 sidor) i kategorin Sällskapsdjur. Guiden har ansetts hjälpsam av 41 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 21 recensioner. Har du en fråga om Cat Mate 254 Electromagnetic eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/3
+44 (0)1932 700 001
N America (936) 760 4333
www.pet-mate.com
5411/0508
61/2"
(165mm)
81/
2"
(216mm)
3/4"
(19mm)
*Screw not supplied
FOR WOODEN DOORS
AND PLASTIC PANELS
1. It is recommended that the
bottom of the hole is
approximately the same level as
your pet's stomach.
2. Place this template in desired
position on door and draw round
completely.
3. Prior to cutting the hole, drill 2
holes of approximately 1/4" (6mm)
diameter in top corners.
4. Use an electric jig-saw to cut
along the inside of the drawn line.
Be careful to cut hole square to
the door, particularly with thicker
doors. Ensure that the frames are
free-fitting in the hole.
5. Determine the thickness of the
panel in your door (see fig. 5).
For Panels
0 - 7/8" (0-23mm):
6. Position interior frame on
inside of door and mark the 4
screw positions.
7. Remove frame and drill screw
clearance holes in panel to
approx.
3/16
" (4mm) diameter.
8. Select the appropriate screws
for the panel in your door (see fig
8).
9. Then, using the appropriate
screws and working from the
inside of the house, tighten the
interior frame to the exterior
frame. When happy with
installation cover screw heads
with caps supplied.
For Panels
7/8"+ (24mm+):
6. First screw interior frame to
inside of panel with short 1/2"
(13mm) screws.
7. Next drill out the 4 screw holes
in the exterior frame to allow close
clearance on screw.
(Recommended drill 3/16
" (4mm)
diameter.)
8. Finally fix exterior frame to
exterior of door using 3/4" (19mm)
screws. When happy with
installation cover screw heads
with caps supplied.
WALLS
After making a hole in your wall,
line with 3/4" (19mm) plywood or
similar material, as shown in fig.
10. This gives a neat tunnel to the
installation and readily accepts
the fixing screws.


Produktspecifikationer

Varumärke: Cat Mate
Kategori: Sällskapsdjur
Modell: 254 Electromagnetic

Behöver du hjälp?

Om du behöver hjälp med Cat Mate 254 Electromagnetic ställ en fråga nedan och andra användare kommer att svara dig