Chacon 34949 Bruksanvisning

Läs gratis den bruksanvisning för Chacon 34949 (56 sidor) i kategorin Larmsystem. Guiden har ansetts hjälpsam av 13 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 7 recensioner. Har du en fråga om Chacon 34949 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

USER GUIDE

For 34949

EN

www.chacon.be

Control Panel

All Sensors are wirelessly linked to the Control Panel.

In the event of alarm activation, for example, when a Sensor is triggered, a push

notification will automatically be sent to all registered users.

The sysem can be conted and montrollitored both on-sie us ng the tiRemote Control

supplied and remotely from anywhere in the world, with the FREE iOS and Android

Apps.

The system can easily be expanded to include up to: 50 Wireless Sensors and 10

Remote Controls.

WiFi Indicator

Status Indicator

Network Configuration

Por Swiwetch

Power Adapter Jack

Learn Button

LED Indication

WiFi Indicator

(Blue)

Steady OnConnected with Router

Searching for a network or disconnected

from Router

Off

1) Initialization (the Control Panel beeps every

3 seconds): lasts for up to 30 seconds after

power up

2) The Power Adapter is not plugged in

Status

Indicator

(Red, Blue

and Green)

Steady OnStable WiFi connection

RedSystem is Armed

Blue System is in Home Mode (Part Arm)

GreenSystem is Disarmed

Disconnected from the Router

second Alarm condition

Functionality of Buttons behind the Back Cover

LearnUsed to pair an accessory with the Control Panel

WiFi Used to pair the Control Panel with the Router

On/offPower Switch

Note: The Control Panel must be plugged in to the Power Adapter in order to maintain the WiFi

connection.

the connected smartphones, and the sounder will keep beeping for 30 seconds.

Remote Control

The Remote Control can be used to arm, part arm or disarm the system, and trigger

an emergency alarm (SOS).

SOS Button

Arm Disarm

Status Indicator

Home Arm

(Part Arm)

ButtonSystem Status

A Sers br henhprllnso wille Amed. This m fodise or use w te opis unoupierty cced.

The System will be Disarmed, no Sensors will be triggered.

Note: When set to ‘Disarm’, Fire, Smoke, and Gas Leakage Sensors will remain

active as they are factory set to ‘24 Hour Zone’

Sensors which are set to the Home Zone will not be Armed. All other Sensors

will be Armed. This mode allows for selected Sensors (for example, front/back

door(s) to be Armed, allowing the occupier freedom of movement within the

property.

regardless of the Control Panel mode.

Press the button. After the indicator on the remote control blinks once, [ ]

press [ ] button within 3 seconds to mutely arm the system.

Press the button. After the indicator on the Remote Control blinks once, [ ]

press [ ] button within 3 seconds to mutely disarm the system.

Note: To turn off the Arm/Disarm tone permanently, open the AW1 Alarm App, go to ‘Internal

Siren'.

Door/ Window Sensor

D/ Ssor stNormal Z’lrilroting oorWindow eniset o ‘one by defau t and ae dea for pect

entry/exit points such as front and back doors and windows. When the system is

Armed, should a Sensor be triggered (Magnet separated from the Transmitter),

registered users and the Control Panel Internal Siren will sound immediately.

Alarming

when 1cm＞

LED blinks once

Tamper Switch

The Tamper Switch (small black button underneath the back cover) will activate an

alarm condition if an unauthorized attempt is made to remove the Sensor from its

installed location.

Low Battery Indication

Produktspecifikationer