Chamberlain CWPIR Bruksanvisning

Läs gratis den bruksanvisning för Chamberlain CWPIR (2 sidor) i kategorin Rörelsedetektor. Guiden har ansetts hjälpsam av 17 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 5 recensioner. Har du en fråga om Chamberlain CWPIR eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

1

Carton Inventory

Assembly & Programming

Attach PIR Motion Sensor box

to mounting plate with large

silver screw. Tighten screw

until PIR Motion Sensor stays

in place when repositioned.

Passive Infra-Red (PIR)

Motion Sensor

Swivel Bushing

Mounting PlateSun/Rain Shield

1

Install 4 AA Alkaline

batteries. (Lithium batteries

recommended for colder

environments.)

LED light will fl ash.

2

Antenna

ON

OFF

12

SWITCH SETTINGS

Switch #1

Switch #2

Learn

Button

OFF Low Sensitivity

ON High Sensitivity (Default)

OFF 15 Feet (4.5 m) Detection Range

ON 30 Feet (9.1 m) Detection Range

(Default)

NOTE: To avoid unwanted detection of small animals move

Switch #2 to OFF.

PIR Motion Sensor

SWITCH #1:

SWITCH #2:

AEnsure Base Station and PIR

Motion Sensor are in close

proximity to each other.

Press and release Learn

Button on Base Station.

Buzzer will sound.

BWithin 60 seconds, press the

Learn Button on the inside of

the PIR Motion Sensor. LED

light will illuminate and Base

Station will buzz.

3

Learn Button

Test PIR Motion Sensor by

waving hand in front of sensor.

LED light should fl ash and

the Base Station will buzz X

number of times indicating

which sensor has been

activated.

Insert battery pack facing away

from circuit board and fasten

cover with the smallest screws

(provided).

NOTE: Ensure the batteries do

not touch the circuit board and

the antenna and battery wires

are not pinched.

4

5

Overview

Learn Button

Models CWPIR and CWPIRC

WIRELESS MOTION ALERT SENSOR

®

The Wireless Alert Sensor is a Passive Infra-Red (PIR) Motion Sensor that detects movement of people and vehicles, while allowing

small animals to pass through undetected. Each sensor has its own unique ID, for a secure radio link. The base station (not provided)

can learn the signals of up to 8 sensors. The base station gives a single beep for the fi rst sensor that is programmed, a double beep for

the second, and so on. Additionally, multiple base stations can work with the same sensor to sound in different places.

Produktspecifikationer