Chauvet IRC-6 Bruksanvisning

Läs gratis den bruksanvisning för Chauvet IRC-6 (6 sidor) i kategorin Fjärrkontroll. Guiden har ansetts hjälpsam av 32 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 3 recensioner. Har du en fråga om Chauvet IRC-6 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

5200 N.W. 108th Ave., Sunrise, FL 33351 U.S.A. (800) 762-1084 – (954) 577-4455 FAX (954) 929-5560

www.chauvetlighting.com

IRC-6 (Infrared Remote Control 6) Operation

Note: Make sure to point the IRC-6 directly at the receiver on the product.

Automatic Mode

Automatic mode will enable you to run the automatic programs on the product.

To turn on Automatic mode:

1.Press <AUTO> on the IRC-6.

2.Press <+> or <–> to choose between the different auto programs.

To adjust the speed of the automatic program:

1.Press <SPEED> on the IRC-6.

2.Press <%>.

3.Press <+> or <–>to either increase or decrease the speed of the program.

Sound-Active Mode

Sound-Active mode will enable the product to respond to the music.

To turn on Sound-Active mode:

•Press <SOUND> on the IRC-6.

To adjust sound sensitivity in Sound-Active mode:

1.Press <SENSITIVITY> on the IRC-6.

2.Press <%>.

3.Press <+> or <–>to either increase or decrease sound sensitivity.

Manual Color Control

To choose a specific color with the IRC-6:

1.Press <MANUAL> on the IRC-6.

2.Press any number between <0>and <9>to choose your color.

To manually control the RGBWA+UV percentage:

1.Press <MANUAL> on the IRC-6.

2.Press <R>, <G>, <B>,<W>, <A>, or<UV> (red, green, blue, white, amber, or ultraviolet) to choose your color.

Note:To use the white, amber, or UV color options, the fixture must be capable of outputting that corresponding color

light.

3.Press <+> or <–>to increase or decrease the percentage of each color.

Miscellaneous Operation

To adjust the strobe rate of the program:

1.Press <STROBE> on the IRC-6.

2.Press <+> or <–>to increase or decrease the strobe rate.

3.Press <STROBE> again to turn off the strobe.

To fade the light output:

•Press <FADE> on the IRC-6.

To black out the lights:

•Press <BLACK OUT> on the IRC-6. This will turn off all the lights until the button is pressed again.

Note: The IRC-6 will not respond to any inputs when Black Out is activated. If the remote does not respond when a

button is pressed, try pressing <BLACK OUT>. You may haveinadvertently activated Black Out.

These are basic instructions for the IRC-6. See your product's User Manual for more detailed operation.

Produktspecifikationer