Chicco KeyFit 35 SoftGoods Removal Bruksanvisning
Chicco
Inte kategoriserad
KeyFit 35 SoftGoods Removal
Läs gratis den bruksanvisning för Chicco KeyFit 35 SoftGoods Removal (3 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 2 recensioner. Har du en fråga om Chicco KeyFit 35 SoftGoods Removal eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/3
WARNING: Avoid serious injury or death to your child. Never
use your KeyFit 35 Child Restraint without the softgoods in place.
You must read and understand the Softgood Removal instructions
and the instructions in the User Guide. If you do not understand
these instructions, DO NOT attempt to remove the softgoods,
STOP and call Chicco at 1-877-424-4226.
INSTRUCTIONS: KeyFit 35 Softgood Removal
IMPORTANT: Please also refer to the instructions that came with your product.
Rotate the Carry Handle up into the carry position. To remove the Canopy, unhook the Elastic Straps on both sides,
below the Carry Handle hub. Undo both Toggles on the back of the Child Restraint. On one side of the Canopy, press the
button on the Canopy Mount and pull out the bow. Repeat for the other side of the Canopy and remove. Then rotate the
Carry Handle back into stationary position.
Refer to User Guide if needed.
1
Press the Harness Adjuster Button and loosen the
Harness Straps. Undo the buckle and chest clips.
2
Remove the optional Head Rest Insert and Newborn
Positioner.
Refer to User Guide if needed.
4
Remove the Crotch Strap Pad by pushing the fabric Tab
through the slot on the BACK of the Harness Buckle. Then
pull Tab out of the FRONT and remove Crotch Strap Pad.
IMPORTANT! If Crotch Strap Pad prevents harness from properly
fitting small Infant, it should be removed.
3
1
SS0030E_01
Remove both Shoulder Pads.
Undo the hook and loop
sections located on the outside seam of the Shoulder Pad.
5
2
At the top and side of the Carrier, flip the plastic tabs
out from under the lip of the Carrier. Pull the fabric from
the top and sides of the Carrier.
9
Pull forward on the Seat Back fabric and guide the Head Rest through the opening on the Seat Back. Pinch the Seat
Pad fabric at the corner of the Harness Adjuster Strap Cover. Pull forward on the Seat Pad edge to remove the fabric from
around the Harness Adjuster Strap Cover.
Note: The plastic Harness Adjuster Strap Cover is NOT removable.
WARNING - NEVER use Child Restraint without the seat pad.
10
Flip the Carrier over
and adjust Head Rest
into the
lowest position, using the Height Adjuster Plate.
6
Remove BOTH Shoulder Harness Straps from the
Splitter Plate. Then flip the Carrier upright and pull the
Shoulder Harness Straps to front of Carrier.
7
Remove the Seat Pad from the carrier.
12
Slide the fabric over both seat belt guides.
Feed
the harness straps, chest clip sections, and crotch buckle
through the fabric openings.
11
Place the Carrier on its side and unhook the Elastic
Straps, located just below the Handle’s rotating hinge.
Then flip out the Plastic Tabs located below the seat belt
guide. Repeat for the other side
8
Height Adjuster
Plate
Adjustment
Positions
4
Make sure the Head Rest is in the lowest position. Buckle the crotch strap buckles and chest clip. Lay the Harness
Straps over the seat back to make sure the Harness Straps are NOT twisted and oriented as shown. Thread Harness Strap
ends into the openings on the Height Adjuster Plate.
22
Flip the Carrier over and pull the harness straps through the openings. Attach BOTH Harness Straps to the
Splitter Plate. Check to make sure the straps are above the Height Adjuster Plate.
WARNING - Make sure Harness Straps
are not twisted and both Harness Straps are securely attached to splitter plate.
23
Attach the Crotch Strap Pad by pushing the fabric Tab
through the slot on the FRONT of the Harness Buckle. Then
pull Tab out of the BACK and attach Crotch Strap Pad.
IMPORTANT! If Crotch Strap Pad prevents harness from properly
fitting small Infant, it should be removed.
25
Flip the Carrier to the front and undo the buckle and
chest clip to attach the optional Newborn Positioner
and Head Rest Insert.
Refer to User Guide if needed.
24
Place the carrier on its side and fold the side plastic
tab under the edge of the Carrier shell. Locate and attach
the elastic strap to the hook, as shown. Tuck the material
with the elastic strap under the bottom of the handle.
Repeat for the other side.
21
On the top of the Carrier, flip the plastic tab and tuck it
under the edge of the Carrier frame.
20
Produktspecifikationer
| Varumärke: | Chicco |
| Kategori: | Inte kategoriserad |
| Modell: | KeyFit 35 SoftGoods Removal |
Behöver du hjälp?
Om du behöver hjälp med Chicco KeyFit 35 SoftGoods Removal ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Chicco Manualer
14 Februari 2025
11 Oktober 2024
2 Oktober 2024
30 September 2024
22 September 2024
20 September 2024
19 September 2024
19 September 2024
19 September 2024
10 September 2024
Inte kategoriserad Manualer
- Caple
- Bush
- ChargeHub
- Easy Home
- Oase
- Koala
- Redmond
- Advantix
- Perixx
- Wiesenfield
- SoundTube
- Sevenoak
- Deltaco
- Edouard Rousseau
- Fisher Paykel
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025