Chief CMA290 Bruksanvisning

Chief Platt panelstöd CMA290

Läs gratis den bruksanvisning för Chief CMA290 (4 sidor) i kategorin Platt panelstöd. Guiden har ansetts hjälpsam av 8 personer och har ett genomsnittsbetyg på 3.6 stjärnor baserat på 4.5 recensioner. Har du en fråga om Chief CMA290 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/4

I N S T A L L A T I O N I N S T R U C T I O N S

Cable Lock Accessory

CMA290

CMA290 Installation Instructions

DISCLAIMER

CSAV, Inc., and its affiliated corporations and subsidiaries

(collectively, "CSAV"), intend to make this manual accurate and

complete. However, CSAV makes no claim that the information

contained herein covers all details, conditions or variations, nor

does it provide for every possible contingency in connection

with the installation or use of this product. The information

contained in this document is subject to change without notice

or obligation of any kind. CSAV makes no representation of

warranty, expressed or implied, regarding the information

contained herein. CSAV assumes no responsibility for

accuracy, completeness or sufficiency of the information

contained in this document.

TOOLS REQUIRED FOR INSTALLATION

A (10)

PARTS

Installation Instructions CMA290

Installation

The CMA-290 cable lock may be used with either a 1/8" or

3/16" 7x19 wire rope.

CAUTION: The 1/8" 7x19 wire rope is rated to 250 lb

(113.40 kg). The 3/16" 7x19 wire rope is rated to 640 lb

(290.30 kg). It is the installer’s responsibility to ensure that

the weight ratings of the cable lock system are not exceeded.

Figure 1

NOTE: (Optional) Melt lead-free solder on end of cable to

prevent unraveling.

1. Feed the cable into the cable lock, being sure to push the

release button in direction of arrow printed on lock.

(See Figure 1)

2. Loop the cable back through a locking channel and pull at

least 6 inches of wire rope through, pushing the release

button in the direction of arrow on lock. (See Figure 1)

Figure 2

3. Pass wire tail from Step 1 back through the remaining

locking channel (See Figure 2).

Unlocking the Cable Lock

To unlock the cable lock:

1. Remove load from cable and cable lock.

2. Push release button in direction of arrow on cable lock.

3. Move cable freely.

Release

Button

Produktspecifikationer

Varumärke:	Chief
Kategori:	Platt panelstöd
Modell:	CMA290
Typ av operation:	Knoppen
Färg på produkten:	Wit
Bredd:	600 mm
Djup:	600 mm
Höjd:	850 mm
Energie-efficiëntieklasse:	A
Ugnens strömkälla:	Electrisch
Typ gas:	Natuurlijk gas
Typ produkt:	Vrijstaand fornuis