Chief KWD220S Bruksanvisning
                    Chief
                    
                    Platt panelstöd
                    
                    KWD220S
                
                                
    Läs gratis den bruksanvisning för Chief KWD220S (16 sidor) i kategorin Platt panelstöd. Guiden har ansetts hjälpsam av 17 personer och har ett genomsnittsbetyg på 3.6 stjärnor baserat på 9 recensioner. Har du en fråga om Chief KWD220S eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
                        Sida 1/16
                    
                    
                    
 Chief Manufacturing, a products division of
Milestone AV Technologies
8401 Eagle Creek Parkway, Savage, MN 55378
• P: 800.582.6480 / 952.894.6280   • F:877.894.6918 / 952.894.6918
8832-000065 Rev. N
©2009 Milestone AV Technologies, a
Duchossois Group Company
www.chiefmfg.com
06/09
I N S T A L L A T I O N   I N S T R U C T I O N S
BEFORE YOU BEGIN
Small Flat Panel Mounts
Model: K-Series
This Instruction Manual covers most of the K-Series wall,
desk, and pole mounts for single, dual, and triple
displays.  In addition, this Instruction Manual also covers
selected K-Series accessories.
NOTE: Some K-Series mounts, such as Extreme Tilt,
Grommet, and Table, as well as most K-Series
accessories, have separate Instruction Manuals.
See Specifications for a complete list of models
covered by this Instruction Manual.
NOTE: If an accessory such as an optional laptop tray is
being installed, complete all required installation
procedures within this document prior to installing
the accessory.
K-Series Mounts (Examples)
WARNING: It is the installer’s responsibility to make sure all components are properly assembled and installed
using the instructions provided.  Failure to read, thoroughly understand, and follow all instructions can result in
serious personal injury, damage to equipment, or voiding of factory warranty.
• If you have any questions about this these instructions or your specific installation, contact Chief Manufacturing.
DISCLAIMER:
Milestone AV Technologies and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and
complete. However, Milestone makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for
every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change
without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or implied, regarding the information contained
herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.
Chief® is a registered trademark of Milestone AV Technologies. All rights reserved.
Produktspecifikationer
| Varumärke: | Chief | 
| Kategori: | Platt panelstöd | 
| Modell: | KWD220S | 
| Färg på produkten: | Grijs | 
| Höjd: | 300 mm | 
| Material: | Aluminium | 
| Längd: | 850 mm | 
| Kompatibilitet: | Gewiss MTXM 400-MTX/E/M 630 | 
| Antal stolpar: | 3P - 4P | 
| Märkströmutgång: | 630 A | 
| Antal moduler (max): | 36 module(s) | 
Behöver du hjälp?
Om du behöver hjälp med Chief KWD220S ställ en fråga nedan och andra användare kommer att svara dig
Platt panelstöd Chief Manualer
                        
                         3 April 2025
                        
                    
                                                            
                        
                         3 April 2025
                        
                    
                                                            
                        
                         3 April 2025
                        
                    
                                                            
                        
                         3 April 2025
                        
                    
                                                            
                        
                         9 Mars 2025
                        
                    
                                                            
                        
                         4 Mars 2025
                        
                    
                                                            
                        
                         4 Mars 2025
                        
                    
                                                            
                        
                         18 Februari 2025
                        
                    
                                                            
                        
                         6 Februari 2025
                        
                    
                                                            
                        
                         31 Januari 2025
                        
                    
                                                            Platt panelstöd Manualer
- Atlantic
 - AMX
 - LTN Technologies
 - Valueline
 - NeoMounts
 - Pyle
 - Sanus
 - Adicam
 - Hitachi
 - Nec
 - Gabor
 - Konig
 - SMS Smart Media Solutions
 - Marantz
 - ViewZ
 
Nyaste Platt panelstöd Manualer
                        
                         8 April 2025
                        
                    
                                                            
                        
                         3 April 2025
                        
                    
                                                            
                        
                         3 April 2025
                        
                    
                                                            
                        
                         3 April 2025
                        
                    
                                                            
                        
                         3 April 2025
                        
                    
                                                            
                        
                         3 April 2025
                        
                    
                                                            
                        
                         3 April 2025
                        
                    
                                                            
                        
                         3 April 2025
                        
                    
                                                            
                        
                         2 April 2025
                        
                    
                                                            
                        
                         2 April 2025