Chief PAC720 Bruksanvisning
Chief
Inte kategoriserad
PAC720
Läs gratis den bruksanvisning för Chief PAC720 (4 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 9 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 5 recensioner. Har du en fråga om Chief PAC720 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
I N S T A L L A T I O N I N S T R U C T I O N S
Instrucciones de instalación
Installationsanleitung
Instruções de Instalação
Istruzioni di installazione
Installatie-instructies
Instructions d´installation
Cart and Stand Clamp Head Accessory
Spanish Product Description
German Product Description
Portuguese Product Description
Italian Product Description
Dutch Product Description
French Product Description
PAC720
Installation Instructions PAC720
3
TOOLS REQUIRED FOR INSTALLATION AND PARTS
3/16"
(Provided)
x1
I/M
B (1)
C (1)
A (1)
E (2)
D (4)
(5/16-18 x 3/4")
F (1)
3/16"
(3/8-16)
PAC720 Installation Instructions
4
ASSEMBLY AND INSTALLATION
WARNING: EXCEEDING MAXIMUM WEIGHT CAPACITY
MAY LEAD TO SERIOUS PERSONAL INJURY OR
DAMAGE TO EQUIPMENT! It is the installer’s responsibility
to ensure the total amount of weight placed on the cart/stand
does not exceed 200 lbs (90.72 kg) for the PFC, 200 lbs
(90.72 kg) for the PF1, 400 lbs (181.44 kg) for the PF2
[200 lbs (90.72 kg) per faceplate].
Installing Display(s) to Cart/Stand
1. Install display(s) to cart or stand following the installation
instructions included with the cart/stand.
Assembling Faceplate to Bracket
1. Attach faceplate (A) to bracket (B) using two 3/8-16 Nylock
lock nuts (E). (See Figure 1)
Figure 1
2. Secure faceplate with bracket around post to clamp bracket
(C) using four 5/16-18 x 3/4" buttonhead cap screws (D).
NOTE: The faceplate assembly must be attached to the clamp
bracket below the knob on the lower part of the cart/
stand post.
Figure 2
Assembly for Dual Display
WARNING: TIPPING HAZARD! Place PAC720 only on
FRONT of PFC and PF1. PAC720 may be placed on both
FRONT and BACK of PF2.
1. Attach first faceplate (A) to bracket (B) using two 3/8-16
Nylock lock nuts (E). (See Figure 1)
2. Attach second faceplate (A) to bracket (B) using two 3/8-16
Nylock lock nuts (E). (See Figure 3)
Figure 3
3. Secure faceplate assemblies with bracket to clamp brackets
(C) onto cart/stand post using four 5/16-18 x 3/4"
buttonhead cap screws (D) on EACH assembly. (See
Figure 4)
(A)
(B)
(E) x 2
1
(C)
2
(D) x 4
(PFC shown)
PAC720 must be
installed BELOW
the knob located
on the post back.
(A)
(B)
(E) x 2
2
Produktspecifikationer
| Varumärke: | Chief |
| Kategori: | Inte kategoriserad |
| Modell: | PAC720 |
Behöver du hjälp?
Om du behöver hjälp med Chief PAC720 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Chief Manualer
3 April 2025
3 April 2025
2 April 2025
4 Mars 2025
28 Januari 2025
16 Januari 2025
16 Januari 2025
4 Januari 2025
4 Januari 2025
1 Januari 2025
Inte kategoriserad Manualer
- Cudy
- Kopp
- Fanvil
- Banana Pi
- Taga Harmony
- Voigtlander
- Austrian Audio
- Quartet
- Mad Dog
- Daewoo
- DOK
- Rademacher
- Jordan
- Vorago
- KitchenAid
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025