Chief Pan-1 Bruksanvisning

Chief Inte kategoriserad Pan-1

Läs gratis den bruksanvisning för Chief Pan-1 (8 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 11 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 6 recensioner. Har du en fråga om Chief Pan-1 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/8

CHIEF MANUFACTURING INC. 8802-000178 (Rev. A)

1-800-582-6480 952-894-6280 FAX 952-894-6918 2005 Chief Manufacturing

8401 EAGLE CREEK PARKWAY, SUITE 700 www.chiefmfg.com

SAVAGE, MINNESOTA 55378 USA 02/05

I N S T A L L A T I O N I N S T R U C T I O N S

PAN-1 Lens Support

The PAN-1 Lens Support is compatible with any RPA

projector mount.

PAN-1 LENS SUPPORT

BEFORE YOU BEGIN

• CAUTION: To prevent damage to the mount, which could affect or void the Factory warranty, thoroughly

study all instructions and illustrations before you begin to install the mount brackets. Pay particular atten-

tion to the “Important Warnings and Cautions” on Page 2.

• If you have any questions about this installation, contact Chief Manufacturing at 1-800-582-6480 or 952-582-6480.

Instruction Instructions PAN-1

IMPORTANT WARNINGS and CAUTIONS!

WARNING A WARNING alerts you to the possibility of serious injury or death if you do not follow

the instructions.

CAUTION A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not

follow the corresponding instructions.

• WARNING Improper installation can result in serious personal injury! Make sure that the

mounting surface can support a redundant weight factor five times the total weight of

the equipment: if not, reinforce the structure before installing the PAN-1 on the

projector.

• WARNING Be aware of the potential for personal injury or damage to the unit if it is not

adequately mounted.

• CAUTION Inspect the unit for shipping damage.

CONTENTS

TOOLS REQUIRED FOR INSTALLATION................... 2

INSPECT PARTS BEFORE ASSEMBLY ..................... 3

Remove and Inspect the PAN-1................................ 3

PAN-1 INSTALLATION PROCEDURES....................... 4

Removing Projector from Ceiling Mount.................... 4

Attaching PAN-1 to RPA............................................ 5

Installing and Adjusting Lens..................................... 6

Adjusting PAN-1 to Projector Lens............................ 7

Pitch Adjustment ................................................... 7

Extension Adjustment ........................................... 7

Lateral Shift Adjustment ........................................ 7

Height Adjustment................................................. 7

Adjustment Notes.................................................. 7

TOOLS REQUIRED FOR

INSTALLATION

• Phillips screwdriver

• 9/64” Allen wrench or Hex wrench

NOTE: Other tools may be required depending on the

method of installation.

Instruction Instructions PAN-1

INSPECT PARTS BEFORE ASSEMBLY

Remove and Inspect the PAN-1

1. Open the shipping container and remove the PAN-1

from the container.

2. Carefully inspect the PAN-1 for shipping damage. If

any damage is apparent, call your carrier claims

agent and do not continue with the assembly

procedure until the carrier has reviewed the damage.

NOTE: Read all assembly instructions before

starting assembly.

3. Carefully inspect all components for damage. See

Table 1, Figure 1, and Figure 2 for details.

Figure 1. PAN-1 Lens Support

Table 1. PAN-1 Parts

ITEM PART NAME QTY

10 MAIN PLATE 1

20 FRONT ADJUSTABLE PLATE 1

30 SEMS SCREW, , , PAN SELF-TAPPING PHILLIPS 4

40 FRONT PLATE 1

50 1/4-20 X 3/4” CARRIAGE BOLT 1

60 KNOB 1

70 10-24 X 1-1/4” PHILLIPS HEAD MACHINE

SCREW BZ

80 10-24 X 5/8” PHILLIPS HEAD MACHINE

SCREW BZ (NOT SHOWN)

90 #10 SAE FLAT WASHER BZ 4

100 NYLON SPACER 2

Figure 2. PAN-1 Lens Support (Top View)

and

Produktspecifikationer

Varumärke:	Chief
Kategori:	Inte kategoriserad
Modell:	Pan-1
Enhetsplacering:	Ingebouwd
Typ av operation:	Draaiknop
Färg på produkten:	Roestvrijstaal
Inbyggd display:	Nee
Bredd:	595 mm
Djup:	545 mm
Höjd:	595 mm
Grill:	Ja
Konvektionsmatlagning:	Ja
Total inomhuskapacitet (ugnar):	50 l
Antal ugnar:	1
Lätt att städa:	Ja
Installationsfackets bredd:	560 mm
Installationsfack djup:	570 mm
Installationsfack höjd:	585 mm
Avtagbar ugnslucka:	Ja
Energiförbrukning (konventionell):	- kWu
Energiförbrukning (tvungen konvektion):	- kWu
Ugnsstorlek:	Middelmaat
Typ av ugn:	Aardgas
Total ugnseffekt:	- W
Ugn med nettokapacitet:	50 l
Kylskåpsdörr:	Ja