Chief SSM345 Bruksanvisning

Chief Inte kategoriserad SSM345

Läs gratis den bruksanvisning för Chief SSM345 (1 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 14 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 7.5 recensioner. Har du en fråga om Chief SSM345 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/1

Milestone AV Technologies, and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone makes

no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use

of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or

implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.

Chief, a products division of Milestone AV Technologies

6436 City West Parkway, Eden Prairie, MN 55344

• P: 800.582.6480 / 952.225.6000 • F:877.894.6918 / 952.894.6918

8800-002817 Rev00

02/16

I N S T A L L A T I O N I N S T R U C T I O N S

SSB-345, SSM-345, SLB-345 and SLM-345 Interface Brackets

SSB-345, SSM-345, SLB-345 and SLM-345 Interface Brackets are designed for use with Chief® Series Projector Mounts. See the specific

installation instructions provided with the mount for additional installation information.

Unpack carton and verify kit contents. If any listed parts are missing, immediately contact a Chief Customer Service representative.

WARNING: IMPROPER INSTALLATION CAN LEAD TO EQUIPMENT FALLING CAUSING SERIOUS PERSONAL INJURY AND

DAMAGE TO EQUIPMENT! DO NOT substitute hardware. Use only hardware supplied by manufacturer!

Installation Instructions

WARNING: OVER TIGHTENING OF SCREWS CAN DAMAGE PARTS AND CAN LEAD TO SERIOUS PERSONAL INJURY AND

DAMAGE TO EQUIPMENT! DO NOT over tighten screws when installing interface brackets.

NOTE: Step 1 is only required when installing an SLB/SSB interface bracket. If an SLM/SSM bracket is being installed, proceed to step 2.

1. Screw thumb screws onto 10-24 x 5/8" Phillips pan head screws. DO NOT fully tighten thumb screws at this time.

2. Turn projector upside down on a flat surface.

3. Place five nylon spacers over threaded inserts on bottom of projector.

4. Place the interface bracket onto the spacers and bottom of the projector, aligning the mounting holes in the bracket with the spacers and

threaded inserts in the bottom of the projector and ensuring that triangle in bracket points towards front of projector.

5. Position five M4 x 20mm mounting screws through interface bracket into spacers and the threaded inserts in bottom of the projector.

Tighten all fasteners at this time, securing the bracket to the projector.

NOTE: Security screws can be substituted when mounting Interface bracket to projector by using the parts and installation instructions in the

All-Points Security Kit.

(1) Interface Bracket (5) Screw, Phillips Flat Head, Machine, M4 x 20mm

(4) 10-24 Thumb Nuts ** (5) Spacer, Nylon, .500 x .194 x .375

(1) All-Points Security Kit (1) 5/32" Security Hex Key

**Only used when installing SLB/SSB interface brackets.

NOTE: Specific to SSB-style and SSM-style interface bracket installation: All appropriate screws come pre-installed in the circled locations above.

DO NOT attempt to substitute and USE ONLY this pre-installed hardware for SSB-style and SSM-style interface bracket installation.

Note: SSB-style interface bracket connections are circled. Note: SSM-style interface bracket connections are circled.

SLB-345 SLM-345

Towards front

of projector

Towards front

of projector

Produktspecifikationer

Varumärke:	Chief
Kategori:	Inte kategoriserad
Modell:	SSM345
Färg på produkten:	Zwart
Snäll:	AV-zender
LED-indikatorer:	Ja
Anslutningsteknik:	Bedraad
Ethernet LAN:	Ja
Videolägen som stöds:	480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Maximal upplösning:	- Pixels
Videokomprimeringsformat:	H.264
Strömförbrukning (max):	3 W
HDCP:	Ja
Anslutning för nätadapter:	Ja
Nätverksstandard:	IEEE 802.3af
Förvaringsfuktighet:	5 - 90 procent
HDMI in:	1
RJ-45 utgångsportar:	1
IR-genomföring:	Ja
Antal HDMI-utgångar:	1
Maximal-räckvidd:	120 m
Drifttemperatur (TT):	5 - 35 °C
Sändarens mått (BxDxH):	119 x 79.5 x 28 mm
Sändarens vikt:	280 g
Kabeltyper som stöds:	Cat5e, Cat6
Baud hastighet:	2.4 Kbit/s