Chief SSM8000 Bruksanvisning

Chief Projektor tillbehör SSM8000

Läs gratis den bruksanvisning för Chief SSM8000 (1 sidor) i kategorin Projektor tillbehör. Guiden har ansetts hjälpsam av 23 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 12 recensioner. Har du en fråga om Chief SSM8000 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/1

I N S T A L L A T I O N I N S T R U C T I O N S

Milestone AV Technologies, and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone makes

no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use

of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or

implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.

Chief Manufacturing, a products division of Milestone AV Technologies

8401 Eagle Creek Parkway, Savage, MN 55378

• P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918

8850-000216 Rev01

a Duchossois Group Company

05/09

SSB-8000, SSM-8000, SLB-8000 and SLM-8000 Interface Brackets

SSB-8000, SSM-8000, SLB-8000 and SLM-8000 Interface Brackets are designed for use with Chief® Series Projector Mounts. See the

specific installation instructions provided with the mount for additional installation information.

Unpack carton and verify kit contents. If any listed parts are missing, immediately contact a Chief Customer Service representative.

WARNING: IMPROPER INSTALLATION CAN LEAD TO EQUIPMENT FALLING CAUSING SERIOUS PERSONAL INJURY AND

DAMAGE TO EQUIPMENT! DO NOT substitute hardware. Use only hardware supplied by manufacturer!

Installation Instructions

WARNING: OVER TIGHTENING OF SCREWS CAN DAMAGE PARTS AND CAN LEAD TO SERIOUS PERSONAL INJURY AND

DAMAGE TO EQUPIMENT! DO NOT over tighten screws when installing interface brackets.

NOTE: Step 1 is only required when installing an SLB/SSB interface bracket. If an SLM/SSM bracket is being installed, proceed to step 2.

1. Screw thumb screws onto 10-24 x 5/8" Phillips pan head screws. DO NOT fully tighten thumb screws at this time.

2. Turn projector upside down on a flat surface.

3. Place the interface bracket onto the bottom of the projector and align the holes in the bracket with the threaded inserts in the bottom of the

projector.

4. Position M4 x 12mm mounting screws with washers into the mounting holes. Tighten all fasteners at this time, securing the bracket to the

projector.

NOTE: Security screws can be substituted when mounting interface bracket to projector by using the parts and installation instructions

in the All-Points Security Kit.

(1) Interface Bracket (3) Washer, Flat, M4

(4) 10-24 Thumb Nuts ** (3) Screw, Pan Head, M4 x 12mm

(1) All-Points Security Kit

**Only used when installing SLB/SSB interface brackets.

NOTE: Specific to SSB-style and SSM-style interface bracket installation, all appropriate screws come pre-installed as reflected in the

encircled locations above. DO NOT attempt to substitute and USE ONLY this pre-installed hardware for SSB-style and SSM-style

interface bracket installation.

SLB-8000 SLM-8000

(Note: SSB-style inte

)

(

)

Towards front of

projector

Towards front of

projector

Produktspecifikationer

Varumärke:	Chief
Kategori:	Projektor tillbehör
Modell:	SSM8000
Färg på produkten:	Zwart
Vikt:	6140 g
Bredd:	190 mm
Djup:	497 mm
Höjd:	449 mm
Ljudnivå:	15 dB
Förpackningens vikt:	7100 g
Förpackningens bredd:	245 mm
Djuppackning:	495 mm
Förpackningshöjd:	545 mm
Snäll:	PC
Vormfaktor:	Midi Tower
Integrerad minneskortläsare:	Ja
Kompatibla minneskort:	SD
Antal USB 2.0-portar:	1
Ljudingångar:	Ja
Ljudutgång:	Ja
Material:	Polymer, Steel
Antal portar USB 3.2 Gen 1 (3.1 Gen 1) Typ A:	2
Strömförsörjning ingår:	Nee
Antal 2,5" fack:	2
Antal 5,25" fack:	2
Antal 3,5" fack:	6
Hårddiskstorlekar som stöds:	2.5, 3.5 "
Antal expansionsplatser:	7
Harmoniserad systemkod (HS):	84733080
Lagen per pallet:	4 stuk(s)
Antal (yttre) huvudpaket per pall:	34 stuk(s)
Moderkortsformfaktorer som stöds:	ATX, Micro ATX
Sidofönster:	Nee
Maximal CPU-kylarhöjd:	158 mm
Maximal grafikkortslängd:	386 mm
Maximalt antal främre fläktar:	2
Främre fläktar som stödjer diametrar:	120,140 mm
Max antal bakre fläktar:	1
Bakre fläktar stödjer diametrar:	80, 90, 120 mm
Installerade bakre fläktar:	1x 120 mm
Formfaktorer för strömförsörjning som stöds:	ATX
Fläkthastighet:	800 RPM
Antal främre fläktar installerade:	1x 120 mm
Antal interna 3,5" fack:	6
Antal externa 5,25" fack:	2