Cisco SPA 500S Bruksanvisning
Cisco
Inte kategoriserad
SPA 500S
Läs gratis den bruksanvisning för Cisco SPA 500S (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 40 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 20.5 recensioner. Har du en fråga om Cisco SPA 500S eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
Quick Start Guide
Cisco Small Business
SPA 500S 32-Button Attendant Console for Cisco
Small Business SPA 500 Series IP Phones
Package Contents
•SPA 500S 32-Button Attendant Console for Cisco Small Business SPA
500 Series IP Phones
•Quick Start Guide
•Attachment Arm
•Attachment Arm Screws (2)
•Auxiliary Interconnect Cable
•Stand
Connecting the Equipment
The following procedure describes how to attach the Cisco SPA 500S to a
Cisco SPA 500 Series IP Phone.
S 1TEP Turn both the Cisco SPA 500 Series IP Phone and the Cisco SPA 500S
face down.
S 2TEP Align the screw hole in the Cisco SPA 500 Series IP Phone with one of
the holes on the attachment arm.
S 3TEP Insert the pegs on the attachment arm into the peg holes as shown
below on the Cisco SPA 500 Series IP Phone.
1
S 4TEP Using an attachment arm screw, secure the attachment arm to the
Cisco SPA 500 Series IP Phone.
S 5TEP Align the right screw hole in the Cisco SPA 500S with the unused hole
on the attachment arm.
S 6TEP Insert the pegs on the attachment arm into the peg holes on the Cisco
SPA 500S.
S 7TEP Using an attachment arm screw, secure the attachment arm to the
Cisco SPA 500S.
CAUTION Do not plug a telephone line cord into the AUX port. Use only the
auxiliary cable provided with the Cisco SPA 500S.
S 8TEP Locate the AUX IN port on the back of the Cisco SPA 500S. Connect
one end of the auxiliary cable to this port.
S 9TEP Locate the AUX port on the back of the Cisco SPA 500 Series IP Phone.
Connect the other end of the auxiliary cable to this port. The Cisco SPA
500S is powered by the auxiliary cable with the Cisco SPA 500 Series
IP Phone; no additional power source is required.
STEP10 Route the auxiliary cable inside the cable slot of the Cisco SPA 500S.
STEP11 Attach the appropriate desktop stand to each unit.
Produktspecifikationer
| Varumärke: | Cisco |
| Kategori: | Inte kategoriserad |
| Modell: | SPA 500S |
Behöver du hjälp?
Om du behöver hjälp med Cisco SPA 500S ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Cisco Manualer
30 Mars 2025
8 Januari 2025
8 Januari 2025
20 Oktober 2024
4 Oktober 2024
25 September 2024
14 September 2024
26 Augusti 2024
24 Augusti 2024
23 Augusti 2024
Inte kategoriserad Manualer
- Xigmatek
- TC Electronic
- Garmin
- UAvionix
- Dantherm
- Beckmann & Egle
- Gamewright
- Swingline GBC
- Sungrow
- Tektronix
- United Office
- Esatto
- Redback Technologies
- SPC
- DoubleSight
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025