Cisco UCS B200 M3 Bruksanvisning

Läs gratis den bruksanvisning för Cisco UCS B200 M3 (36 sidor) i kategorin Server. Guiden har ansetts hjälpsam av 10 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 5 recensioner. Har du en fråga om Cisco UCS B200 M3 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Americas Headquarters:

Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706USA

Cisco UCS B200 M3 Blade Server Installation and

Service Note

The Cisco UCS B200 M3 (shown in Figure 1) is the latest Cisco Intel-based, half-width blade supporting

two CPU sockets using Intel E5-2600 series CPUs and up to 24 DIMMs; it supports one modular LOM

(dedicated slot for Cisco's Virtual Interface Card) and one adapter card. At this time, the UCS B200 M2

(second generation) server is still available and is documented elsewhere. You can install up to eight

UCS B200 Blade Servers to a UCS chassis, mixing with other models or Cisco UCS blade servers in the

chassis if desired. The Cisco UCS B200 M3 is managed by Cisco UCS Manager version 2.0(2m) and

later.

Figure 1Cisco UCS B200 M3 Front Panel

1Asset tag 1

1.Each server has a blank plastic tag that pulls out of the front panel which is provided so that you can add your own

asset tracking label without interfering with the intended air flow.

7Network link status LED

2Blade ejector handle8Blade health LED

3Ejector captive screw9Console connector

4Hard drive bay 110 Reset button access

5Hard drive bay 211 Beaconing LED and button

6Power button and LED

UCS B200 M3

1236 789 10 11

54

331360

Produktspecifikationer