Citizen CAL 6840 Bruksanvisning

Citizen Titta CAL 6840

Läs nedan 📖 manual på svenska för Citizen CAL 6840 (21 sidor) i kategorin Titta. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/21

Setting Instructions for

Movement Caliber 6840

Contents (click on a topic)

1) Outline

2) Main Components

3) Mode Change-Over

4) Before Using

a) 0-Position Setting

5) How to Set and Operate Each Mode

a) Setting the Time

b) Using Race Mode 1

c) Using Race Mode 2

d) Using Race Mode 3

e) Setting the Timer

f) Stopwatch (Chronograph) Operation

g) Setting the Alarm

h) Alarm Monitor in the Normal Time Mode

i) All-Reset Function

6) Use of the Rotating Bezel

7) Specifications

8) Care of Your Timepiece.

1. OUTLINE

This is an analog multi-function quartz watch having eight operation modes that

can be changed with the push button.

Main Features

Race 1: 10-minute graphic timer

Auto-Chronograph after time up

Repeated timer

Race 2: 10, 5-minute graphic timer

Auto-Chronograph after time up

Race 3: 3-,5-,10-minute graphic timer

Timer: 90-minute timer

Chronograph

Alarm

2. Main Components

Return to Table of Contents

3. MODE CHANGE OVER

Push the (M)(lower right) button to switch between modes as shown below

Note: Be sure to check the mode hand to ensure that the watch is set in the desired

mode for use. Pressing the (M)(lower right) accidentally during operation may occur.

4. BEFORE USE

Before use, follow the procedure below to ensure that all watch components are

in proper working order.

Zero Position Confirmation Check

1. Check each hand positioned as listed below

Confirm and correct if necessary

Hour Hand 12:00

Minute Hand 0 minutes

Second Hand 0 seconds

(2) If the watch hands are not positioned as above, follow the Zero position

setting procedures to ensure proper use

Push the (A) (B) or (C) button, with the (M) button in the normal position,

to activate the circular graphic display minute scale, hand movement check

ZERO POSITION SETTING

1. Pull the (M) button out to the 1st

step position.

Reset the Watch, see section “All Reset

Function”

Push the (A) button to move the second

hand to the 0 position.

Push the (B) button to align the arrows on

the minutes scale and dial.

Push the (C) button to move the

hour/minute hands to the 12:00 position.

2. Push the (M) button in to the normal position to complete setting procedures.

Any strong shock to the watch may cause the hands to shift from the “0”

position. In this case, reset to the correct Zero position.

Press and hold down either (A) (B) or (C) buttons for the quick-advance

feature

Occasionally check to ensure the hands are in the correct Zero Position

Slight irregular movement may occur when setting the second hand Zero

position. This movement is normal and has no adverse effect on any watch

function.

TME

Normal

time mode

R-1

Race 1

R-2

Race 2

R-3

Race 3

>0<

Zero Position

Confirmation

CHR

Stop-Watch

Mode

TMR

Timer

Mode

ALM

Alarm

Mode

Circular graphic display

minute scale

Return to Table of Contents

to “0” mode

(Zero Position confirmation mode)

Produktspecifikationer

Varumärke:	Citizen
Kategori:	Titta
Modell:	CAL 6840
Färg på produkten:	Zwart
Förpackningens vikt:	19960 g
Förpackningens bredd:	690.9 mm
Djuppackning:	1140.5 mm
Förpackningshöjd:	109.2 mm
Ursprungsland:	China
Antal per paket:	2 stuk(s)
Kompatibilitet:	SR4POST50HD
(Ytter) huvudpaketets höjd:	109.2 mm
(Ytter) huvudförpackningens bredd:	690.9 mm
(Ytter) huvudförpackningens bruttovikt:	19960 g
(Ytre) huvudpaketets längd:	1140.5 mm
Kvantitet per (yttre) huvudkartong:	1 stuk(s)
Rackkapacitet:	50U
Harmoniserad systemkod (HS):	7326.90.8688