Club 3D CSV-7300 Bruksanvisning

Club 3D Splitter CSV-7300

Läs gratis den bruksanvisning för Club 3D CSV-7300 (2 sidor) i kategorin Splitter. Guiden har ansetts hjälpsam av 25 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 13 recensioner. Har du en fråga om Club 3D CSV-7300 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
CSV-7300 QUICK INSTALLATION GUIDE
Thank you for purchasing our CSV-7300 Product.
After unpacking the product, please make sure you have all the items provided and checked for any damages. In case of any
missing/damaged parts please inform your supplier immediately.
You should have :
• CSV-7300 MST Hub
• 1x USB Type A cable,
• Quick Install Guide
Please make sure your Host System has the latest drivers updates installed before installing the MST Hub
- Connect your preferred Display(s) to the designated connector(s) one by one and power on your Display unit(s)
- Connect the USB Type A connector to a Type A connector for powering the MST Hub
- connect the DP connector to the source.
In case you have any problems with obtaining the correct images on your displays,
Please press the RESET button, for min. 1 sec., at the bottom side of the CSV-7300.
Allow some time for the MST Hub to perform the reset for all three ports.
For any Questions please check our forum section on our
website www.club-3d.com
Reset Button
USB Type A power cable Connection


Produktspecifikationer

Varumärke: Club 3D
Kategori: Splitter
Modell: CSV-7300

Behöver du hjälp?

Om du behöver hjälp med Club 3D CSV-7300 ställ en fråga nedan och andra användare kommer att svara dig