CLUB3D SenseVision CSV-5300 Bruksanvisning
Läs gratis den bruksanvisning för CLUB3D SenseVision CSV-5300 (2 sidor) i kategorin Splitter. Guiden har ansetts hjälpsam av 29 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 15 recensioner. Har du en fråga om CLUB3D SenseVision CSV-5300 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
                        Sida 1/2
                    
                    
                    
Output Up to 5 Up to 6
Up to 3 Up to 6
Up to 2 Up to 4
1
1366x768 @ 60Hz, 24bpp
1600x900 @ 60Hz, 24bpp
1920x1080 @ 60Hz, 24bpp
2560x1440 @ 60Hz, 24bpp Up to 2
HBR HBR2
Illustration of two CSV-5300 on a six monitor congurationAvailable bandthwidth and number of display devices
ailable, the content on this document may be out of date or include omissions, inaccuracies or other errors. Therefore Club 3D does not accept any rights claimed on the content of this docu-
n www.club-3d.com. All other brand names are trademarks or registered trademarks and are the property of their respective owners. All content is subject to change without prior notice.
Club 3D B.V. PO Box 599, 2130 AN Hoofddorp, The Netherlands
www.club-3d.com
      Weight  Size
Multi Stream transport Hub  100g  78.2*60.5*18.6 mm
1. Easy conguration for adding three displays and 
    does NOT require active adapters (DP++ compliant)
2. Perfect multi monitor solution on a budget. Plug 
    and Play.
3. Hot plugging. Does not require shutting down the 
    system.
4. Compatible to all existing DisplayPort graphic cards 
    and notebooks
1
5. Best with AMD Radeon™ Graphics
2 
6. Best with AMD A-series APU’s
3
7. AMD Eyenity Technology ready
4
1 
Check with your device vendor if restrictions are applied
2 
5K series and above
3 
DisplayPort output from mainboard is required
4
Supports multiple independent display outputs simultaneously, AMD Eyenity technology 
delivers innovative graphics display capabilities enabling massive desktop workspaces and 
ultra immersive visual environments for the ultimate panoramic computing experience. 
SenseVision - Multi Stream Transport Hub
CSV-5300 - EAN: 8717249411918
Leveraging the micro-packet architecture of DisplayPort™, DisplayPort™ 
1.2  adds  the  capability  to  address  and  drive  several  display  devices 
through  one  DisplayPort™  connector.  This  feature  has  often  been 
referred to as daisy-chaining or addressable displays.
The  Club  3D  MST  hub  is  a  hub  device  that  receives  a  DisplayPort™ 
1.2  MST  signal from  the  source  device  and  splits  up  and  routes  the 
video streams independently to each display device. Using this type of 
conguration also allows the use of non DisplayPortTM 1.2 monitors. 
Non  DisplayPort™  outputs,  such  as  VGA,  DVI or  HDMI®,  the Club  3D 
MST hub is DP++ and can actively convert the DisplayPort™ signal to 
the other types of display interface signals.
Multi-display Technologies  DisplayPort™ 1.2,  a new display interface, 
boasts  features  such  as  tremendous  bandwidth  and  daisy-chaining 
capabilities. Combined, these features complement the AMD  Eyenity 
technology multi-display technology very well.
The new MST hub display technology is part of the ecosystem in the 
Club 3D AMD Radeon™ graphic cards.
Supported graphic cards can be found on the following AMD RAdeon 
series:
- HD 5000 Series (HBR)
- HD 6000 Series (HBR2)
- HD 7000 Series (HBR2)
Club 3D recommends: 
CAC-1000 - DP to SL
5
 DVI-D
CAC-1001 - DP to HDMI
CAC-1002 - DP to VGA
CAC-1050 - DP to DL
6
 DVI
CAC-1051 - DP to DL
6
 DVi 3D
CAC-1052 - DP to SL
5
 DVI
CAC-1053 - DP to HDMI 3D
5 
SL= Single Link
6 
DL= Dual Link
- Standards compliance/support:displayport v1.2, displayport v1.1a,VESA DDM 
- Standard,HDCP V2.0,DisplayId,and EDID V1.4 
- Supports main link rates of 5.4 bps(HBR2),2.7 bps(HBR)and 1.62 bps(RBR) from source 
- Supports 1/2/4 lanes of main link for RX side 
- Supports three DP++ output port,or two dual-link DVI ports,or the combination of ports 
- For DP 1.2 source,supports DP1.2 MST multi video/audio steams 
- Supports 1.1 source,supports ViewXpand 
- Supports DP-DP Bypass mode 
- Supports AUX-CH enables SBM and I2C mapping over AUX between the source/sink and 
   device 
- Dedicated I2C slave for main processor to access the device 
- Supported output resolution:up to 2560X1600@60Hz each monitor in DP1.2 MST and up to 
   FHD/1080p in DP1.1 or DP 1.2 SST 
- Input pixel data depth 6/8/10/12 bits and supports output pixel format RGB444
KEY POINTS
PRODUCT FEATURES
BRIEF DESCRIPTION
Produktspecifikationer
| Varumärke: | CLUB3D | 
| Kategori: | Splitter | 
| Modell: | SenseVision CSV-5300 | 
Behöver du hjälp?
Om du behöver hjälp med CLUB3D SenseVision CSV-5300 ställ en fråga nedan och andra användare kommer att svara dig
Splitter CLUB3D Manualer
                        
                         21 September 2024
                        
                    
                                                            Splitter Manualer
- Sun Joe
 - Fujitsu
 - Scheppach
 - Key Digital
 - Act
 - Zipper
 - Radial Engineering
 - D-Link
 - Comprehensive
 - Gefen
 - Tripp Lite
 - Advantech
 - Samsung
 - LevelOne
 - Aluratek
 
Nyaste Splitter Manualer
                        
                         7 April 2025
                        
                    
                                                            
                        
                         27 Mars 2025
                        
                    
                                                            
                        
                         20 Februari 2025
                        
                    
                                                            
                        
                         8 Januari 2025
                        
                    
                                                            
                        
                         7 Januari 2025
                        
                    
                                                            
                        
                         6 Januari 2025
                        
                    
                                                            
                        
                         2 Januari 2025
                        
                    
                                                            
                        
                         2 Januari 2025
                        
                    
                                                            
                        
                         2 Januari 2025
                        
                    
                                                            
                        
                         2 Januari 2025