Code CRD900FD Bruksanvisning

Code Streckkodsläsare CRD900FD

Läs gratis den bruksanvisning för Code CRD900FD (2 sidor) i kategorin Streckkodsläsare. Guiden har ansetts hjälpsam av 13 personer och har ett genomsnittsbetyg på 3.7 stjärnor baserat på 7 recensioner. Har du en fråga om Code CRD900FD eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/2

Using the CR900FD in a Universal Stand

The CR900FD has a stand detecon feature. By

default, when the CR900FD is placed in the stand,

the reader will automacally enter into moon

detecon mode. When in this mode, simply place

a bar code in the scan eld to acvate the reader.

The CR900FD will beep and ash a green LED to

indicate a ‘good read’ has occurred.

When the CR900FD is removed from the stand,

the reader switches to manual mode and the

trigger must be pressed to read a bar code.

Press and hold the CR900FD trigger, the two

blue bars eming from the reader are used for

targeng. Center the blue bars in the middle of

a bar code.

The opmal reading distance from reader to bar

code is approximately 4.0” (10 cm).

For USB Cable: plug the USB end of the Anity® cable into a USB port on the host device.

Aer several seconds, the reader will beep twice and the LED will turn o to indicate the

CR900FD is ready for use.

For RS232 Cable: plug the power supply into the AC outlet, plug the power supply cord into

the barrel jack of the cable, and connect the RS232 connector to the appropriate serial port

on the host device. Aer several seconds, the reader will beep twice and the LED will turn o

to indicate the CR1400 is ready for use.

Using the CR900FD Out of a Universal Stand

Powering on the CR900FD CR900FD Default Sengs

UPC/EAN/JAN

Code 39

Code 93

The CR900FD, out of the box, will read the following 1D bar codes:

The CR900FD can be upgraded to read 2D bar codes with the purchase of a license key. 2D

license keys can be purchased individually or as a package. Available licenses:

Conguraon Codes

Once the reader is at the opmal distance, the CR900FD will read the bar code (when the

trigger is pressed). The CR900FD will beep and ash a green LED to indicate a ‘good read’ has

occurred.

2 3

Code 128

Interleaved 2 of 5

Codabar

GS1 DataBar (RSS)

PDF417

Data Matrix

QR Code

Aztec Code

All 2D bar codes

Visit www.codecorp.com for upgrading/license key informaon.

Upgrade Opons

Note: a CR900FD will read Data Matrix conguraon codes.

The CR900FD can be quickly, and easily congured to meet the needs of dierent use cases.

A common conguraon is reading bar codes found on cell phone screens. To enable, or

disable, cell phone reading mode, scan the appropriate code below.

For more conguraon opons refer to the CR900FD Conguraon Guide located at

www.codecorp.com. For custom conguraon opons, please contact us at

support@codecorp.com.

Enable Cell Phone Reading Mode Disable Cell Phone Reading Mode

Produktspecifikationer

Varumärke:	Code
Kategori:	Streckkodsläsare
Modell:	CRD900FD
Färg på produkten:	Wit
Bredd:	520 mm
Ljudnivå:	- dB
Energie-efficiëntieklasse:	A
Årlig-energiförbrukning:	43.2 kWu
Snäll:	Inbouw
Motoreffekt:	- W
Avgasanslutningsdiameter:	150 mm
Maximal utsugskapacitet:	582 m³/uur
Extraktionsmetod:	Afvoerend/recirculerend
Vätskedynamisk effektivitetsklass:	A
Ljuseffektivitetsklass:	A
Fettfilter effektivitetsklass:	C
Ljudnivå (låg hastighet):	50 dB
Typ lampa:	LED
Soort vetfilter:	Aluminium
Ljudnivå (hög hastighet:	62 dB
Ljudnivå (intensiv hastighet):	70 dB