Coleman Vela Bruksanvisning

Coleman tält Vela

Läs gratis den bruksanvisning för Coleman Vela (2 sidor) i kategorin tält. Guiden har ansetts hjälpsam av 33 personer och har ett genomsnittsbetyg på 4.1 stjärnor baserat på 17 recensioner. Har du en fråga om Coleman Vela eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
Connect Frame to Tent
Insert one end of main tent pole
onto pin of pin & ring system at tent
corner. (illus. 3)
Go to opposite end of pole and
gradually apply pressure to the pole
forming an arch until you are able to
insert the pin into the pole.
Repeat for second pole. (illus. 4)
Layout & Positioning
of Tent, Pole Assembly
Layout and position tent with door
facing desired direction. (illus. 1)
Unzip door.
Stake down tent using the rings of the
pin & ring system at the corners of the
tent. Keep the floor taut. (illus. 2)
Assemble frame poles by
interlocking shock-corded poles.
This will make two long poles.
Insert the poles diagonally into pole
sleeves.The center of the poles should
cross forming an “X” in the middle of
tent. (illus. 1)
2
Assembled
poles
inserted
through
pole
sleeves
illus. 1
illus. 4
Tent frame set-up
illus. 2
Tent stake through ring
illus. 3
Insert pole end onto
pin & ring
VELA
®
12’x11’
When You Are Ready To Set
Up Your Tent
Select a level campsite clear of
rocks, branches and other hard
or sharp objects.
Do not set up your tent under trees.
For best results in windy conditions,
do not position the door of tent
into the wind.
(1) Rainfly
Pole
Rainfly Part No.
9161-1041
(2) Main Tent
Poles
POLE ASSEMBLY PARTS
Instructions apply to Part Number 9161-121
Part No. 9161-1021
Part No. 9161-1031


Produktspecifikationer

Varumärke: Coleman
Kategori: tält
Modell: Vela

Behöver du hjälp?

Om du behöver hjälp med Coleman Vela ställ en fråga nedan och andra användare kommer att svara dig