Cotech 36-6706 Bruksanvisning

Läs gratis den bruksanvisning för Cotech 36-6706 (5 sidor) i kategorin Lättnad. Guiden har ansetts hjälpsam av 16 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 8 recensioner. Har du en fråga om Cotech 36-6706 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

GREAT BRITAINCUSTOMER SERVICE•

tel020 8247 9300 customerservice@clasohlson.co.uk www.clasohlson.co.uk 10 – 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZe-mailinternet postal

Ver. 20170809

LED Under Cabinet Light

Art.no 36-6706, 36-6707

Please read theentire instruction manual before using theproduct

and then save it for future reference. We reserve theright for

any errors in text or images and any necessary changes made

to technicaldata. In theevent of technical problems or other

queries, please contact our Customer Services.

Safety

3. Press down on theconnector and disconnect thewires.

Placethelamp module to oneside.

6. Reassemble thelight fitting by first reconnecting thelamp

module to thehousing at theconnection which was

disconnected at step 3 above and then fitting thelamp

module back onto thehousing.

Care and maintenance

• Use adry cloth to wipe thelight fittingclean.

• Thelamps are non-replaceable. Nevertry to open

thelamp modules or modify thelight fitting in anyway.

Responsible disposal

The light source contained in this luminaire shall

only be replaced by the manufacturer or his service

agent or a similar qualified person. Caution to

the risk of electric shock during installation or

maintenance.

• This product must only be installed by aqualified electrician.

• This product is only intended for indoor hard-wired

installation.

• The operating temperature of the luminaire is −30 to 40 °C.

Installation

1. Warning: Before beginning any electrical

installation always disconnect thepower

to thecircuit you are working on, either by

turning off themain circuit breaker or by

removing thefuse from theconsumerunit.

2. Carefully pry thelamp module away from themain

housing of thelight fitting. Makesure that thewires Note:

connecting thelamp module and thehousing are not

damaged.

4. Pass thepower supply

cable through one of

thegrommets in thewall

of the housing. Becareful

not to damage thecable

entry grommet. Connect

thepower supply cable to

theterminalblock.

5. Screw thehousing onto themounting surface. Itcan be

mounted flat on asingle surface or angled between two

surfaces at right angles to eachother. Usetheincluded

screws and plugs or another appropriate fastening method.

36-6706

36-6707

This symbol indicates that this product should not

be disposed of with general householdwaste.

Thisapplies throughout theentire EU. Inorder to

prevent any harm to theenvironment or health

hazards caused by incorrect waste disposal,

theproduct must be handed in for recycling so

that thematerial can be disposed of in arespon-

sible manner. Whenrecycling your product, take it

to your local collection facility or contact theplace

of purchase. Theywill ensure that theproduct is

disposed of in anenvironmentally sound manner.

Specifications

36-6706

Rated voltage 220–240V

AC, 50/60Hz

Power 3.5W

Length 457mm

IP rating

36-6707

Rated voltage 220–240V

AC, 50/60Hz

Power 9.5W

Length 718mm

IP rating

Only intended for indooruse.

Produktspecifikationer