Cotech 51058x2 Bruksanvisning
Läs gratis den bruksanvisning för Cotech 51058x2 (6 sidor) i kategorin Växla. Guiden har ansetts hjälpsam av 11 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 6 recensioner. Har du en fråga om Cotech 51058x2 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/6
UNITED KINGDOM • CUSTOMER SERVICE
tel 020 8247 9300 customerservice@clasohlson.co.uk www.clasohlson.co.uk e-mail internet
postal Clas Ohlson Ltd, Aquilla House (First floor), 1 Becketts Wharf, Lower Teddington Road, Hampton Wick, Kingston Upon Thames, KT1 4ER
Ver. 20190923
Dimmer Switch Receiver
Art.no 18-1254 Model 51058GBx2
36-6009 51058x2
Please read theentire instruction manual before using theproduct and then save
it for future reference. Wereserve theright for any errors in text or images and
any necessary changes made to technicaldata. Intheevent of technical pro-
blems or other queries, please contact our Customer Services.
Safety
• Make sure that theelectrical socket that theproduct is plugged into is
easily accessible in case it and theconnected product need to be quickly
disconnected from themains electricity.
• Do not connect products of this type to each other.
• Do not cover theproduct.
Operating instructions
Installation
5. Connect alight to thereceiver and
check that thelight is switchedon.
Tip: Thelight can also be switched on/
off manually by pressing thebutton on
thereceiver.
1. Plug thereceiver into
anelectrical outlet.
2. Hold in thebutton on thefront of
thereceiver for at least 3seconds and
then releaseit.
3. TheLED button will start flashing slowly.
Thereceiver is now ready to be paired
with aremote control.
4. Press one of theon-buttons on
theremote control once (if it has more
than one on-button). TheLED on
thereceiver will shine steadily when
theremote control has been paired.
Upto 6 remote controls can be paired
with thereceiver.
Dimming the light
Thelight can be dimmed using thepaired remote control. Thisis how to doit:
Press theon-button on theremote control twice in quick succession to cause
thelight to alternately increase and decrease. Presstheon-button once more
when thedesired light level has been reached.
Switching the light on/off
Switch thelight on/off using theon and off buttons. Thelight comes on at
thelatest light level setting when theon-button is pressed. Ifyou wish to set
anew light level once thelight is switched on, press theon-button on theremote
controlagain. Presstheon-button once more when thedesired light level has
been reached.
Deleting a paired remote control
Up to 6 remote controls can be stored in thememory of thereceiver. Ifyou
wish to pair aremote control when six remote controls are already paired with
thereceiver, you must first delete one of theexisting remote controls:
1. Hold in thebutton on thefront of thereceiver you wish to delete for 3
seconds and then releaseit.
2. TheLED button will start flashing slowly. Thereceiver is now ready to delete
theremote control.
3. Press in theoff-button on theremote control (make sure to choose
thecorrect off-button if theremote control can connect to multiple receivers).
Theremote control will now be deleted from thereceiver.
Deleting all paired remote controls
Care and maintenance
• Thereceiver should be unplugged from thewall socket if it is not to be used
for alongtime.
• Thereceiver should be cleaned by wiping it with adrycloth.
Troubleshooting guide
Thereceiver is
not working,
theLED is
notlit.
• Has thereceiver been paired with aremote control as
describedabove? Trypairing themagain.
• Check that thelight is properly plugged into thereceiver
and that it is switched on and not faulty.
• Try plugging thelight into another electrical outlet to
make sure that itworks.
• Is there electricity in theoutlet thereceiver is
pluggedinto?
Responsible disposal
1. Hold in thebutton on thefront of
thereceiver for 6 seconds until
theLED button starts flashing
quickly.
2. When theLED stops flashing, all
theremote controls which were
paired with thereceiver will have
been deleted.
This symbol indicates that this product should not be
disposed of with general householdwaste. Thisapplies
throughout theentire EU. Inorder to prevent any harm to
theenvironment or health hazards caused by incorrect waste
disposal, theproduct must be handed in for recycling so that
thematerial can be disposed of in aresponsible manner.
Whenrecycling your product, take it to your local collection
facility or contact theplace of purchase. Theywill ensure that
theproduct is disposed of in anenvironmentally sound manner.
Specifications
18-1254
Supply voltage 220–240 V, 50 Hz
Frequency 433.92 MHz
Maxrange 25m
Max load
Incandescent and halogen bulbs (230V) Max 200W
Dimmable LED bulbs (230V) Max 3–24W
36-6009
Supply voltage 230V, 50 Hz
Frequency 433.92 MHz
Maxrange 25m
Max load
Incandescent and halogenbulbs Max 200W
Dimmable 230V LEDbulbs Max 3–24W
Produktspecifikationer
| Varumärke: | Cotech |
| Kategori: | Växla |
| Modell: | 51058x2 |
Behöver du hjälp?
Om du behöver hjälp med Cotech 51058x2 ställ en fråga nedan och andra användare kommer att svara dig
Växla Cotech Manualer
16 Augusti 2024
13 Augusti 2024
11 Augusti 2024
9 Augusti 2024
7 Augusti 2024
Växla Manualer
- SPC
- Merten
- GEV
- Elation
- Intellinet
- Advantech
- Philips
- Grasslin
- Crestron
- Marmitek
- Extron
- TP Link
- Cudy
- Emerson
- Lancom
Nyaste Växla Manualer
9 April 2025
9 April 2025
7 April 2025
5 April 2025
5 April 2025
5 April 2025
5 April 2025
3 April 2025
3 April 2025
2 April 2025