Cotech IPC30SA1A Bruksanvisning
Läs gratis den bruksanvisning för Cotech IPC30SA1A (4 sidor) i kategorin Lättnad. Guiden har ansetts hjälpsam av 24 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 12.5 recensioner. Har du en fråga om Cotech IPC30SA1A eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
UNITED KINGDOM •
www.clasohlson.co.uk
Ver. 20220406
LED Floodlight
Art.no 36-7617-1, 36-7617-2, 36-7618-1, 36-7618-2
Model IPC15A1A-B, IPC15A1A-W, IPC30SA1A-B, IPC30SA1A-W
Please read theentire instruction manual before use and then save it for
future reference. Wereserve theright for any errors in text or images and any
necessary changes made to technicaldata. Intheevent of technical problems or
other queries, please contact our Customer Services.
Safety
• This product is extremely bright. Donot look directly into thelight, doing so
could cause eye damage.
• Never let children play with theproduct.
• The product should only be connected to an earthed 230 V AC, 50 Hz
mains outlet.
• Theproduct must not be used in rooms where explosive gases or liquids are
used or stored.
• Treat theproduct with care and do not subject it to shocks or impacts.
• Never immerse theproduct in water or other liquid.
• Theproduct must not be covered.
• Never try to open thehousing, repair or modify theproduct in anyway.
• Never use theproduct if your hands are moist orwet.
• Never use theproduct if it, its mains lead or plug is damaged in anyway.
• All repairs must be carried out by qualified service technicians using genuine
spareparts.
• Themains lead should be checked regularly. Ifthemains lead is damaged in
any way it must be replaced by aqualified electrician.
Installation
• Fasten thefloodlight to afirm, level surface.
• Do not mount thefloodlight where there is arisk of it falling into water or
other liquids.
Warning
• Make sure that thewall has no concealed electrical wiring, gas or water
pipes before drilling/screwing.
• Make sure that thepower supply to thefloodlight is switched off/isolated.
• Thefloodlight should be connected to apower supply protected by asafety
device such as aresidual current circuit breaker/residual current device
(RCCB/RCD).
TheLED module in thelight fitting must not be replaced by anyone other
than aqualified electrician.
Specifications
36-7617-1
Rated voltage 220–240V AC, 50/60Hz
Power 15W
Colour Black
Light source COB-LED, 1400 lm (non-replaceable)
Colour temperature 4000K
Colour rendition > 80 Ra
Beam angle 120°
IP rating IP65
Protection class Class 1 (theproduct must be earthed)
Operating temperature −20 to 40 °C
Connecting cable 80 cm, H05RN-F3G1.0 mm²
Size 15×12×4.2cm
36-7617-2
Rated voltage 220–240V AC, 50/60Hz
Power 15W
Colour White
Light source COB-LED, 1400 lm (non-replaceable)
Colour temperature 4000K
Colour rendition > 80 Ra
Beam angle 120°
IP rating IP65
Protection class Class 1 (theproduct must be earthed)
Operating temperature −20 to 40 °C
Connecting cable 80 cm, H05RN-F3G1.0 mm²
Size 15×12×4.2cm
36-7618-1
Rated voltage 220–240V AC, 50/60Hz
Power 30W
Colour Black
Light source COB-LED, 2600 lm (non-replaceable)
Colour temperature 4000K
Colour rendition > 80 Ra
Beam angle 120°
IP rating IP65
Protection class Class 1 (theproduct must be earthed)
Operating temperature −20 to 40°C
Connecting cable 80 cm, H05RN-F3G1.0 mm²
Size 17.5×14.5×5cm
36-7618-2
Rated voltage 220–240V AC, 50/60Hz
Power 30W
Colour White
Light source COB-LED, 2600 lm (non-replaceable)
Colour temperature 4000K
Colour rendition > 80 Ra
Beam angle 120°
IP rating IP65
Protection class Class 1 (theproduct must be earthed)
Operating temperature −20 to 40 °C
Connecting cable 80 cm, H05RN-F3G1.0 mm²
Size 17.5×14.5×5cm
1. Use thewall bracket as atemplate
and mark out where thescrew holes
are to be drilled.
Note: You don’t need to detach
thewall bracket from thefloodlight,
it pivots to make it easier to mark
out holes for drilling and screwing in
mounting screws.
2. Use anappropriate type of screw
for thewall material and attach
thebracket to thewall.
3. Tilt thefloodlight to thedesired angle
and tighten thescrews fastening
thewall bracket to thefloodlight.
Care and maintenance
Clean thefloodlight by first switching it off and then wiping it with adrycloth.
Important
If theglass on thefront of thefloodlight is damaged, it must be replaced before
thefloodlight is usedagain. Thefloodlight must not be used if theglass is
damaged or missing.
Responsible disposal
This symbol indicates that this product should not be
disposed of with general householdwaste. Thisapplies
throughout theentire EU. Inorder to prevent any harm to
theenvironment or health hazards caused by incorrect
waste disposal, theproduct must be handed in for recycling
so that thematerial can be disposed of in aresponsible
manner. Whenrecycling theproduct, take it to your local
collection facility or contact theplace of purchase. Theywill
ensure that theproduct is disposed of in anenvironmentally
sound manner.
Produktspecifikationer
| Varumärke: | Cotech |
| Kategori: | Lättnad |
| Modell: | IPC30SA1A |
Behöver du hjälp?
Om du behöver hjälp med Cotech IPC30SA1A ställ en fråga nedan och andra användare kommer att svara dig
Lättnad Cotech Manualer
21 September 2024
16 September 2024
13 September 2024
4 September 2024
2 September 2024
30 Augusti 2024
30 Augusti 2024
28 Augusti 2024
27 Augusti 2024
24 Augusti 2024
Lättnad Manualer
- Artecta
- Schwaiger
- Quintezz
- CAT
- Ledar
- LumenRadio
- Expolite
- Luxform Lighting
- Kern
- Auriol
- Gingko
- Trio Lighting
- Crestron
- Audibax
- Yamazen
Nyaste Lättnad Manualer
9 April 2025
9 April 2025
9 April 2025
8 April 2025
8 April 2025
8 April 2025
7 April 2025
5 April 2025
5 April 2025
5 April 2025