Cotech SP-03LS3M-RGBPMD-01B Bruksanvisning
Cotech
Inte kategoriserad
SP-03LS3M-RGBPMD-01B
Läs gratis den bruksanvisning för Cotech SP-03LS3M-RGBPMD-01B (4 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 32 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 16.5 recensioner. Har du en fråga om Cotech SP-03LS3M-RGBPMD-01B eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
UNITED KINGDOM www.clasohlson.co.uk
Auto
FlashC3
CS
IC Set
W/WW
JumpC7
MetersC16
7
6
10
8
9
4
5
32
1
Ver. 20220613
LED Strip Light with Light Effects
Art.no 36-8068 Model SP-03LS3M-RGBPMD-01B
Read theentire instruction manual before use and save it for future reference.
We apologise for any text and picture errors and any changes of technical data.
If you have any questions concerning technical problems please contact our
Customer Services.
Safety
Warning:
• Neither theproduct nor its mains adapter may be dismantled or modified in any way.
• Never use theproduct or themains adapter if it is in any way damaged or
malfunctioning. Unplug theproduct immediately if it is damaged.
• Do not use theproduct in explosive atmospheres or in thepresence of
flammable liquids or gases.
• The product must only be connected to theincluded mains adapter.
• Never connect several or other types of devices to themains adapter.
• The product must not be installed on awet or electrically conductive surface.
• Make sure that thecables are not damaged whilst theproduct is being installed.
• Always unplug themains adapter from thewall socket when theproduct is
not in use.
• Do not carry theproduct using themains lead and do not use it for other
unsuitable purposes.
• Never let children play with theproduct.
• The product may be used by persons with reduced physical, sensory or
mental capabilities or persons with alack of experience or knowledge which
could jeopardise their safety, provided they have been instructed in thesafe
operation of theproduct and understand thehazards involved.
Important:
• The LEDs cannot be replaced. When theLEDs have reached theend of their
service life, theentire product must be discarded.
• This product is intended only for private use.
Risk of eye damage. Do not look directly at thelight source.
The product is not suitable for illuminating aroom.
The product is intended for indoor use only.
Class II mains adapter.
Class III strip light
Installation
Information
The LED strip light can be mounted using thedouble-sided adhesive tape.
For best adhesion, ensure that thesurface is clean, dry and free of grease.
If necessary, thelength of theLED strip can be adjusted by cutting it at one of
themarkings (every 10cm along thelength of thestrip). If thestrip light is Note:
shortened so that it has fewer than 48 LEDs remaining, theIC Set function will
not work.
1. Strip light: Remove theprotective film from thetape on theback of thelight
strip and attach it to aclean, grease-free surface. The strip light may also be
screwed on with plastic clips.
2. Connectors. Connect thestrip light and thecontrol box together.
Note: Make sure thestrip light is connected in theright way. Otherwise
thestrip light will not shine.
3. IR Receiver. Make sure there are no obstacles between theIR receiver Note:
on theLED control unit and theremote control.
4. Connect theconnecting cable to theLED control unit.
5. Plug themains adapter into asuitable wall socket.
Remote control
Remove theplastic battery tab.
10. Select aspecific direction for thedifferent colours:
: The strip light shines fully and then gradually turns off theLED lights
from themiddle of thestrip and out to thesides.
: The LED lights turn on from thesides and move towards themiddle.
: A group of 21 LED lights that move from one side to theother.
: 12 LED lights that move from one side to theother.
: The LED strip light lights up from one side to theother until
thewhole strip light is lit. The lights go off and thenext cycle starts.
: A group of 21 LED lights turn on and move from one side to
theother where thelights are gradually dimmed and then turn off.
Care and maintenance
• Unplug themains lead from thewall socket before cleaning.
• The product should be cleaned using adry cloth or vacuum cleaner.
Responsible disposal
This symbol indicates that theproduct should not be disposed of
with general household waste. This applies throughout theentire EU.
In order to prevent any harm to theenvironment or health hazards
caused by incorrect waste disposal, theproduct must be handed in
for recycling so that thematerial can be disposed of in aresponsible
manner. When recycling your product, take it to your local collection
facility or contact theplace of purchase. They will ensure that
theproduct is disposed of in anenvironmentally sound manner.
Specifications
Mains adapter
Power supply 230 V AC, 50 Hz
Output 12 V, 2 A DC
Light strip
Dimensions 3000×10 mm
Light source 90×LED
Rated voltage 12 V DC
Rated power 19 W
Remote control
Range Max 5 m
Battery 1×CR2025 (included)
6. Choose between single or multiple colours:
CS: 1 colour
C3: 3 colours (R,G, B)
C7: 7 colours
C16: 16 colours
7. Press [ IC Set ] and use [ ] and [ ] to
gradually turn off or turn on 6 LED lights at
atime (You can never have fewer than 48
active LEDs). Select acolour with thecolour
selection buttons (6) and adjust thebrightness
with [ ] and [ ].
8. : Change from warm white to cool white W / WW
: On/off
9. Auto: Switches between all colours and programmes
: A group of 15 LED lights in different colours moves from one side to
theother where thelights are gradually dimmed.
After afew cycles thedirection changes and theLED lights move in theother direction.
Flash: The whole strip light flashes. You decide if you want it to flash in
asingle colour or multiple colours using thecolour selection buttons (6).
Jump: The whole strip light shines at themaximum brightness and changes
between on and off. If you have selected multiple colours, thestrip light does
not turn off but switches between theselected colours.
Meteor: A group of 21 LED lights turn on at thestart and move from one
side to theother where thelights are gradually dimmed and then turn off.
21 LED lights turn on again and go in theopposite direction.
Produktspecifikationer
| Varumärke: | Cotech |
| Kategori: | Inte kategoriserad |
| Modell: | SP-03LS3M-RGBPMD-01B |
Behöver du hjälp?
Om du behöver hjälp med Cotech SP-03LS3M-RGBPMD-01B ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Cotech Manualer
18 September 2024
16 September 2024
16 September 2024
16 September 2024
16 September 2024
16 September 2024
16 September 2024
15 September 2024
12 September 2024
1 September 2024
Inte kategoriserad Manualer
- Exelpet
- CaterCool
- Scancool
- Trendnet
- AvaTime
- Tams Elektronik
- OLLO
- Elinchrom
- Nebula
- Lindy
- Yongnuo
- Primus
- Rittal
- Imperial
- Ferguson
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025