Crest Audio Versarray Mk III Bruksanvisning
Crest Audio
Inte kategoriserad
Versarray Mk III
Läs gratis den bruksanvisning för Crest Audio Versarray Mk III (20 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 20 personer och har ett genomsnittsbetyg på 3.5 stjärnor baserat på 10.5 recensioner. Har du en fråga om Crest Audio Versarray Mk III eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/20
1
Crest Audio® Versarray™ Mk III
FlyQWIK™
Adjustable Rigging System
Crest Audio® Versarray™ Mk III Two Foot Fly Bar
FG# 03618490
Specications and Instructions
CAUTION ! Before attempting to suspend any Versarray™ Rigging Hardware with or without speak-
ers hung from it, consult a certied structural engineer. e Halo/Fly Bar and/or speaker array can
fall from improper suspension, resulting in serious injury and property damage. Use only the correct mat-
ing hardware. All associated rigging is the responsibility of others.
Description
e Crest Audio® Versarray™ Mk III Two Foot Fly Bar is used in conjunction with the Crest Audio® Versar-
ray™ Mk III Halo to provide additional multiple single-point hang balance points, increasing the number
available on the Halo alone from 8, to a total of 29 discrete points.
is part is an optional piece of the overall rigging system, and it may not be needed if the center bar of the
Halo provides an acceptable balance point for a single-point hang of the line array as congured and own.
It can also be used to y the Versarray™ Mk III Halo via two hang points at either end of the Versarray™ Mk
III Two Foot Fly Bar. See Figure 1 for the labeled FLy Bar holes.
Specications:
Overall Dimensions, H x W x L:
3.00” X 0.50” X 25.34” (1.2 cm X 1.3 cm X 64.4 cm)
Weight: 11 lbs.
Material: 1 / 2 ” thick by 3” solid steel alloy with eight 23mm rigging holes along the center of it’s length.
Finish: Entire Fly Bar is at black powder coated paint nish.
Recommended Shackle Specications
(Shackle NOT supplied with the Versarray™ Mk III Two Foot Fly Bar):
3/4” diameter pin Forged Carbon Steel Screw-pin Anchor Shackle
18mm or 20mm diameter pin based shackles can also be used, and the Stainless Steel alloy 316 can be an
alternate material for the shackle.
e shackle should be load rated for a minimum of 2 tons (4,000 lbs.), and shackles of this size and materi-
als oen have load ratings in excess of this.
Working Load Limit: 544 kg / 1,200 lbs. for Ultimate Strength Design Factor of 10:1
(is meets PLASA North America criteria and typically exceeds local USA safety requirements.)
Working Load Limit: 453 kg / 1,000 lbs. for Ultimate Strength Design Factor of 12:1
(is is in compliance with the European Union mandated Safety Factor)
Maximum Combined Pull-Back Angle, Two or less Subs in the hang: 30 degrees
Maximum Pull-Back Angle, more than 2 Subs in the hang: 15 degrees
Produktspecifikationer
| Varumärke: | Crest Audio |
| Kategori: | Inte kategoriserad |
| Modell: | Versarray Mk III |
Behöver du hjälp?
Om du behöver hjälp med Crest Audio Versarray Mk III ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Crest Audio Manualer
23 Augusti 2024
Inte kategoriserad Manualer
- Maturmeat
- OXI Instruments
- Phidgets
- Ozone
- SEB
- Computherm
- Constructa
- FOX ESS
- DigitSole
- Argus
- W'eau
- Domyos
- SPL
- DataVideo
- Lansinoh
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025