CRUX AUX-BM4 Bruksanvisning


Läs gratis den bruksanvisning för CRUX AUX-BM4 (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 20 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 10.5 recensioner. Har du en fråga om CRUX AUX-BM4 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.080719
1 of 2
R
INTERFACING SOLUTIONS
- The AUX-BM4 will enable the Auxiliary Audio Input on the OEM navigation radio menu.
PRODUCT FEATURES:
PARTS INCLUDED:
INSTALLATION INSTRUCTIONS:
AUX-BM4 OBD Coder Audio Input Cable
AUX-BM4
Auxiliary Input Interface and OBD Coder for Select
BMW Vehicles with Business or Professional Navigation System
1. Locate OBD-port and remove cover (commonly located under the dashboard on the driver side).
2. Turn ignion switch to ACC.
3. Wait unl the navigaon has booted.
4. Plug coder into OBD-port.
5. The navigaon will re-boot.
6. When the navigaon startup-screen shows, remove coder from OBD-port.
7. Your radio’s Auxiliary Audio input feature is now enabled.
To remove the Auxiliary Audio feature from the navigaon’s menu repeat steps 1-6. Aer the rst use on a
vehicle, the coder AUX-BM4 is personalized to this vehicle. On this vehicle the enabling and removing the
Audio-AUX feature can be repeated without limit.
The AUX-cable must be connected into the female Quadlock connector of the vehicle harness on the
back of the radio (receiver under the AC vents).
Quadlock connector, chamber B
Pin 2 ● Audio (+) le (white)
Pin 7 ● Audio (+) right (red)
Pin 8 ● Audio (-) ground (black)


Produktspecifikationer

Varumärke: CRUX
Kategori: Inte kategoriserad
Modell: AUX-BM4

Behöver du hjälp?

Om du behöver hjälp med CRUX AUX-BM4 ställ en fråga nedan och andra användare kommer att svara dig