CRUX CLP-13M Bruksanvisning

Läs gratis den bruksanvisning för CRUX CLP-13M (1 sidor) i kategorin övervakningskamera. Guiden har ansetts hjälpsam av 22 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 3 recensioner. Har du en fråga om CRUX CLP-13M eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Crux Interfacing Solutions • Chatsworth, CA 91311

phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com

rev.081920

CLP-13M

Universal License Plate Camera with

Moving Parking Guide Lines

1

- With moving parking guide lines that move to the direction you are turning.

- Selectable parking guide lines ON or OFF.

- Includes a buttery mount for mounting exibility.

PRODUCT FEATURES:

PARTS INCLUDED:

INSTALLATION DIAGRAM:

CLP-13M CAMERAEXTENSION CABLEBuery Mount

WHITE Wire

Parking Guideline

Regulator

Extension Coax Cable

GROUND

RED Wire (A)*

License Plate Camera

RED Wire (B)*

Make sure the arrows

line up and push in

the connectors well.

To Aftermarket Radio

Backup Camera Input

OR

Reverse Camera Interface

Backup Camera Input

*NOTE: To power the camera, use RED Wire A or B. If tapping power from the radio or RVC Interface, make sure to

insulate RED Wire A to avoid it from shorng. If you will be tapping power from the reverse light +12V, insulate RED

Wire B to avoid it from shorng. With either connecon the Black GROUND wire needs to be connected to a solid chassis

ground. For vehicles with manual transmission, we recommend tapping +12V power from the reverse light.

R

INTERFACING SOLUTIONS

Sightline

CAMERAS

WHITE Wire Loop: Cut to remove parking guide lines. Connect to show parking guide lines. Insulate with tape to avoid from

shorng.

NOTE: Cycle the camera power by unplugging the 4 pin barrel connectors aer connecng or disconnecng the control wires.

*****DO NOT power the camera from +12V constant (baery) or +12V ACC*****

Produktspecifikationer