CRUX CUL-10 Bruksanvisning

Läs gratis den bruksanvisning för CRUX CUL-10 (1 sidor) i kategorin övervakningskamera. Guiden har ansetts hjälpsam av 14 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 7.5 recensioner. Har du en fråga om CRUX CUL-10 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/1
WHITE Wire
Parking Guideline
Regulator
Extension Coax Cable
GROUND
RED Wire (A)*
Camera
RED Wire (B)*
Make sure the arrows
line up and push in
the connectors well.
To Aftermarket Radio
Backup Camera Input
OR
Reverse Camera Interface
Backup Camera Input
BLUE Wire
Flip Image Horizontally
*NOTE: To power the camera, use RED Wire A or B. If tapping power from the radio or RVC Interface, make sure to insulate RED Wire A to avoid it from
shorting. If you will be tapping power from the reverse light +12V, insulate RED Wire B to avoid it from shorting. With either connection
the Black GROUND wire needs to be connected to a solid chassis ground. For vehicles with manual transmission, we recommend tapping
+12V power from the reverse light.
WHITE Wire: Connect to show parking guide line. Disconnect to remove.
BLUE Wire: Connect to ip image horizontally to use as front facing camera. Disconnect to use as reverse camera.
(Not all cameras will have a Parking Guide Line or Flip Image function.)
R
INTERFACING SOLUTIONS
Sightline
CAMERAS
Crux Interfacing Solutions • 6860 Canby Ave., Suite 116, Reseda, CA 91335
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com

Produktspecifikationer

Varumärke: CRUX
Kategori: övervakningskamera
Modell: CUL-10

Behöver du hjälp?

Om du behöver hjälp med CRUX CUL-10 ställ en fråga nedan och andra användare kommer att svara dig