CRUX VIMHN-96 Bruksanvisning

Läs gratis den bruksanvisning för CRUX VIMHN-96 (1 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 4 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 2.5 recensioner. Har du en fråga om CRUX VIMHN-96 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/1
HONDA
2 - 014 2015 Civic Coupe / Sedan (EX & above)
2014 - 2015 Civic Si Coupe / Sedan / Hybrid / CNG
2015 2016- Fit
2015 - 2016 CR-V (EX & above)
2016 CR-Z
2016 HR-V
- -Retains functionality of Factory installed Navigation System for passenger access at anytime.
- Allows the use of the HDMI input while in motion.
- . Plug and Play Installation
- C . ompatible with HondaLink® Next Generation radios only
1. Remove the factory radio from the dashboard.
2. Remove the factory connectors from behind the factory radio.
3. Mate the T- Harness connections to the factory connectors and the VIM module. (Make sure all
connectors are properly seated into the interface and into the radio.)
4. Set DIP1 to ON and the rest to OFF.
5. Test the interface before -re install the radio into the dash.
Vehicle A applic tions
Fea rtu es
Par Its ncluded
I a I cnstall tion nstru tions
Note
Rev.01 1816
1

Produktspecifikationer

Varumärke: CRUX
Kategori: Inte kategoriserad
Modell: VIMHN-96

Behöver du hjälp?

Om du behöver hjälp med CRUX VIMHN-96 ställ en fråga nedan och andra användare kommer att svara dig