CTA Digital PAD-LEDPARAF Bruksanvisning


Läs gratis den bruksanvisning för CTA Digital PAD-LEDPARAF (3 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 25 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 13 recensioner. Har du en fråga om CTA Digital PAD-LEDPARAF eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/3
Premium Floorstand with LED Light Add-On
for 9-11" Tablets
PAD-LEDPARAF
INSTRUCTION - MANUAL
CONTENTS:
718-963-9845
INSTALLATION:
1. Assembling floorstand base:
1A. Allign the holes on the sntad (A) with holes on the base (B) and turn in
screws (M) with provided allen tool (J) until securely tightened. Shown above.
2B. When the cable reaches the
bottom of the stand, pull through the
hole at the stand back and remove
the weighted pendant as shown.
2A. To route a charge cable through
the stand, attach the weighted
pendant to your charge cable, then
pass through the cutout at the top of
the stand.
3A. Align enclosure (C) VESA holes to VESA plate holes in stand (A) and from the
front of enclosure turn in screws (L) into the threaded VESA holes with provided
allen tool (I) until securely thigtened. Shown above.
4A. Find the appropiate size foam padding (K) for the tablet you wish to use.
Make sure device is compatible for the enclosure. if having power/data cord
attached to tablet, slide it through the back of the foam as shown and out the
opening in the back.
**Tablet for illustration only,
NOT INCLUDED
M5 x 10
x4
M6 p1-x4
2. Cable routing:
K
K
C
C
A
I
A
B
M
J
L
x2
D
LED Bars
E
x1
F
x1
G
x1
H
x1
I
x1
M5 Allen Key
M5 x 10
L
x4
x1
N
J
x1
M6 Allen Key
M
x4
M6
K
x1
x1
C
x1
A
B
x1


Produktspecifikationer

Varumärke: CTA Digital
Kategori: Inte kategoriserad
Modell: PAD-LEDPARAF

Behöver du hjälp?

Om du behöver hjälp med CTA Digital PAD-LEDPARAF ställ en fråga nedan och andra användare kommer att svara dig