Cudy P4 Bruksanvisning


Läs gratis den bruksanvisning för Cudy P4 (2 sidor) i kategorin Router. Guiden har ansetts hjälpsam av 26 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 13.5 recensioner. Har du en fråga om Cudy P4 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
1 According to the engraved SIM
direction, insert your Nano SlM card
into the slot until you hear a clicking
sound.
5 Open a browser and follow
below pictures to log in the router.
A Wi-Fi: Connect your device to the
router’s Wi-Fi using the SSID (network
name) and Password printed on the
bottom of the router.
5G SSID:
2.4G SSID:
Password:
Cudy-
****
-5G
Connect
Auto Connect
Cudy-
****
-5G
Password
Next Cancel
B Wired: Turn off the Wi-Fi on your
computer and connect it to the router’s
LAN port via an Ethernet cable.
SafariFirefoxChromeEdge
http://cudy.net/
http://cudy.net/
When the LED is in yellow or white,
the router is connected to the cellular
network.
If the LED is in red, please continue
to configure the router.
3 Check the LED.
Flash
Solid
Off
Status 5G Model
Off
Yellow
Red
White
Red
Off
Yellow
White
Flash
Solid
Off
Name
5G/WAN
4G/3G/2G
http://cudy.net/
Confirm
Create an administrator password
Create a password
LAN
4 Connect to the router via A or B
method.
2 Connect the power adapter to the
router, and wait for 2~5 minutes until
the system LED turns solid on.
1 0
Note: If the signal is still too weak indoors, try installing your
extension antennas (not included in the box) to the SMA
connector and placing the antennas outdoors.
1 0
1 0
1
2
Go to Step 5 and continue.
Note: No hot-swapping. Please insert or remove the SIM
card while the system is powered off.
Here to install antennas when necessary.
Nano SIM
SIM


Produktspecifikationer

Varumärke: Cudy
Kategori: Router
Modell: P4

Behöver du hjälp?

Om du behöver hjälp med Cudy P4 ställ en fråga nedan och andra användare kommer att svara dig