CyberPower CPUAC600 Bruksanvisning


Läs gratis den bruksanvisning för CyberPower CPUAC600 (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 29 personer och har ett genomsnittsbetyg på 4.0 stjärnor baserat på 15 recensioner. Har du en fråga om CyberPower CPUAC600 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
CONGRATULATIONS ON YOUR PURCHASE
Thank you for selecting the CyberPower CPUAC600 Surge
Protector. This manual explains the features and operation of the
CPUAC600. Please take a few moments to read this manual.
WARNING
IDENTIFYING THE CORRECT VOLTAGE AND POLARITY
SETTINGS FOR THE CONNECT EQUIPMENT AND ADJUSTING
THE PRODUCT ACCORDINGLY IS THE USER’S RESPONSIBILITY.
Caution: This device is intended to input 120V AC power, all
necessary safety precautions should be followed. Not
recommended for use by children.
Failure to adjust the adaptor settings to match the requirements
of the connected device can result in damage to the device.
1. Identify the correct plug tip that fits in the device you wish
to power.
2. Identify the polarity required for the device you are connecting.
The polarity will typically be identified in either the user’s
manual or on the input specifications on the device itself (see
‘Polarity Markings’ section). Turn the tip you are inserting into
the adaptor cord so that the ‘ ’ text on the tip lines up with
either the ‘+’ or ‘–’ symbol on the adaptor cord depending on
whether positive ‘+’ or negative ‘–’ polarity is required. If the
device is not polarized, either setting can be used. If the device
does not have a polarity specification, contact the manufacturer
of the device and ask them. Using an incorrect polarity can
damage the device.
3. Set the voltage switch to the required voltage for the device you
are connecting. The voltage required will typically be identified
in either the user’s manual or on the input specifications on the
device itself. If you cannot determine the proper voltage,
contact the manufacturer of the device and ask them. Using an
incorrect voltage can damage the device.
4. Plug the adaptor cord into the device then plug the AC power
cord for the adaptor into a standard 120V outlet. If the device
does not function, unplug the AC power cord from the outlet
immediately. Check to make sure the voltage and polarity
settings being used are correct.
DETACHABLE PLUGS
• 2.5 (OD) x 0.75 (ID) x 10.5 ±0.5 (L) - Yellow
• 3.0 (OD) x 1.00 (ID) x 10.5 ±0.5 (L) - Black
• 3.5 (OD) x 1.35 (ID) x 10.5 ±0.5 (L) - Red
• 4.0 (OD) x 1.70 (ID) x 11.0 ±0.5 (L) - Yellow
• 5.5 (OD) x 1.50 (ID) x 12.2 ±0.5 (L) - Black
• 5.5 (OD) x 2.10 (ID) x 12.0 ±0.5 (L) - Blue
• 5.5 (OD) x 2.50 (ID) x 12.0 ±0.5 (L) - White
POLARITY MARKINGS
When looking for polarity markings on the device you wish to
power with the CyberPower Universal AC adapter, they will
typically be identified as such:
USER MANUAL
Universal AC Adapter
CPUAC600
Universal AC Adapter
CPUAC600
12
Copyright © 2019 Cyber Power Systems (USA), Inc. All rights reserved.
4.567.5912 3
Voltage Selector
Up to 600mA
Positive Polarity Negative Polarity
Depending on the device, the orientation of the positive and
negative poles in the depiction may be reversed but, if the
device requires positive polarity, the ‘–’ symbol will be on the
side with the ‘C’ shaped arc. If negative polarity is required, the
‘+’ symbol will be on the side with the ‘C’ shaped arc.
TECHNICAL SUPPORT
Please contact our Tech Support Department with installation,
troubleshooting, or general product questions.
• Phone: 1-877-297-6937
• Email: tech@cpsww.com
• Hours of Operation:
Monday – Friday 7:00am – 6:00pm CST


Produktspecifikationer

Varumärke: CyberPower
Kategori: Inte kategoriserad
Modell: CPUAC600

Behöver du hjälp?

Om du behöver hjälp med CyberPower CPUAC600 ställ en fråga nedan och andra användare kommer att svara dig