CyberPower Essential CSB7012 Bruksanvisning
CyberPower
Inte kategoriserad
Essential CSB7012
Läs gratis den bruksanvisning för CyberPower Essential CSB7012 (4 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 5 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 3 recensioner. Har du en fråga om CyberPower Essential CSB7012 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
CONGRATULATIONS ON YOUR PURCHASE
Thank you for selecting the CyberPower
CSB706/CSB7012 Surge Protector. This manual explains
the features and operation of the CSB706/CSB7012.
Please take a few moments to read this manual.
FEATURES
1. ON/OFF Reset Control Switch and Circuit Breaker
Controls power to all outlets. The switch is also a 15 A
breaker. When an overload occurs, it will automatically
switch o. To resume operation, ensure the overload
condition is removed and reset the surge protector by
switching the unit ON.
2. Surge Protected Indicator
Illuminated when the surge protection feature is
working properly.
3. Seven Standard Outlets
SPECIFICATIONS
• Model Number: CSB706/CSB7012
• Outlets: 7 Stnadard Outlets
• Surge Protection: 1500 Joules
• Electrical Rating: 125 V/15 A/1875 W
• UL Clamping Voltage: UL 1449 3rd/500 V (H-N, H-G, N-G)
• Maximum Peak Current: 60,000 A
• 3 AC Lines Protected: H-N: 30,000 A, H-G: 15,000 A,
N-G: 15,000 A
• Response Time: Less than 1 nanosecond
• Attenuation: Up to 32 dB
• Circuit Breaker: Resettable 15 Amp
• EMI/RFI Filtration: 150 kHz to 100 MHz
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK - Use only
in dry locations and only indoors. DO NOT plug into
another relocatable power tap. DO NOT “daisy chain”
surge protectors. use with any aquarium DO NOT
equipment. DO NOT use if properly grounded outlets are
not available. DO NOT install this device if there is less
than 10 meters (30 feet) or more of wire between the
electrical outlet and electrical service panel. DO NOT use
for medical or life support equipment. This device
features an internal protection that will disconnect the
surge protective component at the end of its useful life,
but it will maintain unprotected power to the load.
TROUBLESHOOTING
▪ If the ON/OFF is switched OFF, the 15 Amp circuit
breaker may have tripped. Examine your connected
equipment and remove the device that is overloading the
circuit. Then, turn the ON/OFF switch back to RESET.
▪ If the protected indicator does not light, the surge
protector’s AC lines are no longer protected from surge.
The surge protector may have received a power surge
or spike beyond its specified limits that overloaded the
protection circuitry and rendered it inactive. The surge
protector has protected your connected equipment as
designed, but it will not protect against future surges,
and spikes. It should be replaced.
TECHNICAL SUPPORT
Please contact our Tech Support Department with
installation, troubleshooting, or general product questions.
• Phone: 1-877-297-6937
• Email: tech@cpsww.com
• Hours of Operation:
Monday – Friday 7:00am – 6:00pm CST
USER MANUAL
7-Outlet Surge Protector
CSB706/CSB7012
7-Outlet Surge Protector
CSB706/CSB7012
12
Copyright © 2018 Cyber Power Systems (USA), Inc. All rights reserved.
1
2
3
Produktspecifikationer
| Varumärke: | CyberPower |
| Kategori: | Inte kategoriserad |
| Modell: | Essential CSB7012 |
Behöver du hjälp?
Om du behöver hjälp med CyberPower Essential CSB7012 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad CyberPower Manualer
3 April 2025
8 Januari 2025
8 Januari 2025
8 Januari 2025
4 Januari 2025
4 Januari 2025
24 December 2024
12 Oktober 2024
10 Oktober 2024
10 Oktober 2024
Inte kategoriserad Manualer
- Sage
- DeepCool
- Elkay
- First Austria
- Revic
- Hisense
- Summer Infant
- CGV
- Einhell
- Avenview
- Wolf
- KM-fit
- Middle Atlantic
- DPA
- Rio
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025