D-Link ANT70-CB1RN Bruksanvisning


Läs gratis den bruksanvisning för D-Link ANT70-CB1RN (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 8 personer och har ett genomsnittsbetyg på 4.2 stjärnor baserat på 4.5 recensioner. Har du en fråga om D-Link ANT70-CB1RN eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
System Requirements
Install the surge protection adapter. (For exten-
sion use, you can install with optional ANT24-
CB03N, ANT24-CB06N, or ANT24-CB09N low
loss cables per needs.)
Step 1
Step 2
Step 3 (If needed)
1
indoor AP use only.
If you would like to connect your outdoor antenna to outdoor AP,
please use another type of extension cable like ANT70-CB1RN
or ANT70-CB1N required to be attached to outdoor AP.
Remove the default antenna from your device.
Step 4
When install the surge protection adapter
to cables, please wrap the connectors by
enclosed water-proof tape tightly.
Connect the extension cable
1
/antenna
onto the external connector on device.
The surge protection adaptor from outdoor antenna
packaging is for the connection to the lighting protection
system (grounding) of buildings. All devices are protected
by the grounding to avoid the lighting strikes. It protects
your precise WLAN equipment from high voltage surges
caused by discharge and transients from the antenna.
D-Link Antenna-kit Installation Guide
INSTALLATION


Produktspecifikationer

Varumärke: D-Link
Kategori: Inte kategoriserad
Modell: ANT70-CB1RN

Behöver du hjälp?

Om du behöver hjälp med D-Link ANT70-CB1RN ställ en fråga nedan och andra användare kommer att svara dig