D-Link DEM-QX10Q-LR4 Bruksanvisning

D-Link Inte kategoriserad DEM-QX10Q-LR4

Läs gratis den bruksanvisning för D-Link DEM-QX10Q-LR4 (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 16 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 8.5 recensioner. Har du en fråga om D-Link DEM-QX10Q-LR4 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/2

10 Gigabit SFP Transceivers

DEM-400 Series

D-Link’s 10G SFP+ Module series are hot-swappable SFP+ transceivers that plug into SFP+ slots

on switches and support 10G Ethernet. The D-Link 10GBASE SFP+ Module Series transceivers

oer customers a wide variety of 10G Ethernet connectivity options for data centers, enterprise

wiring closets, and service provider transport applications. They are hot pluggable and

Enhanced Small Form Factor Pluggable (SFP+) compliant with the Multi-Source Agreement

(MSA) specication.

Enhanced Small Form-factor Pluggable Format

The transceivers use the Enhanced Small Formfactor Pluggable format (SFP+). The SFP+ form

factor is smaller than other form factors such as Xenpak, X2, and 10G XFP, ensuring lower

costs, lower power disruption, and higher port density. They provide the necessary signal

amplication for data to be transmitted to the network cable from the port, and vice versa, for

the port to receive data from the etwork cable.

Hot Pluggable

All D-Link transceivers are hot-pluggable. You can connect a transceiver while the system is

powered on without causing any problems. This permits modules to be added or removed

without interrupting the network.

10G Ethernet speeds

The transceivers all support 10G Ethernet, which results in very fast data transmissions of up to

10 Gbit/s. This is 10 times faster than Gigabit Ethernet and enables the switch to handle faster

and higher data transmissions, making it very suitable for business needs.

Features

• Enhanced Small Form-Pluggable (SFP+) form

factor

• Hot pluggable

• Support 10G Ethernet

• Support bre cables up to 10 km

• Support copper cables up to 30 m

• RoHS Compliant

• Compliant with MSA (Multiple Source

Agreement)

• Compliant with IEEE802.3ae standard

Covers Vast Distances

Support for maximum bre lengths of up to 10 km,

ideal for businesses spanning multiple premises, as

well as copper lengths of up to 30 m

High Performance

Full duplex Gigabit data transfer rates provide the

network transmission speeds that business

environments demand

Hot Pluggable

Easily switch out transceivers while the power is on,

facilitating network maintenance and minimising

downtime

Product Highlights

DEM-400 Series 10 Gigabit SFP Transceivers

D-Link European Headquarters. D-Link (Europe) Ltd., First Floor, Artemis Building, Odyssey Business Park, West End Road, South Ruislip HA4 6QE, United Kingdom.

Specications are subject to change without notice. D-Link is a registered trademark of D-Link Corporation and its overseas subsidiaries.

Updated March 2019

For more information: www.dlink.com

Technical Specications

DEM-410T DEM-431XT DEM-432XT

Standard Compliance IEEE 802.3an 10GBase-T•

• IEEE 802.3ab 1000BASE-T

• IEEE-802.3ae

• 10GBASE-SR

• IEEE-802.3ae

• 10GBASE-LR

Transceiver Type • SFP+ • SFP+ • SFP+

Fibre Channel FC-PI Standard • 1200-Mx-SN-I • 1200-SM-LL-L

Fiber Media Support • Multi-Mode • Single-Mode

Distance Capacity

• 10GBASE-T up to 30 m with Cat 6a 62.5 μm, 160 MHz-km: 26 m•

• 62.5 μm, OM1 200 MHz-km: 33 m

• 50 μm, 400 MHz-km: 66 m

• 50 μm, OM2 500 MHz-km: 82 m

• 50 μm, OM3 2000 MHz-km: 300 m

• 50 μm, OM4 3700 MHz-km: 550 m

• 10 km

Hot Pluggable  

MSA Compliant  

RoHS Compliant 

Speed • • 10 Gbps 10 Gbps

Connector • RJ45 • Duplex LC connector Duplex LC connector•

Single/Bi Direction • Single-direction • Single-direction

Wavelength • • 850 nm 1310 nm

Output Optical Power (TX Optical Power) Max.: -1 dBm / Min.: -6.5 dBm Max.: 0.5 dBm / Min.: -8.5 dBm• •

Input Optical Power (RX Optical Power) Max.: -1 dBm / Min.: -11.1 dBm Max.: 0.5 dBm / Min.: -8.5 dBm• •

Sensitivity • • -11.1 dBm -12.6 dBm

Cable Type • Cat6a

• Cat5e

• Multi-mode 50/125 um or 62.5/125

um fibre

• Single-mode 9/125 um fibre

Power / Maximum Input Current 3.3 V: 780 mA 3.3 V: 300 mA 3.3 V: 300 mA• • •

Minimum / Maximum Power Budget 4.6 dB / 10.1 dB 4.1 dB / 10.1 dB• •

Heat Generated 3.6 kJ/h 3.6 kJ/h• •

MTBF (Hours) • 217,186 • 3,960,000 • 4,650,000

Operating Temperature • • • 0 to 65 °C 0 to 70 °C 0 to 70 °C

Storage Temperature • • • -40 to 85 °C -40 to 85 °C -40 to 85 °C

Operating Humidity 5 to 95% 5 to 85% 5 to 85%• • •

Storage Humidity 5 to 95% 5 to 95% 5 to 95%• • •

Dimensions (W x D x H) Compliant with SFF--8431 and •

SFF8432, 13.7 x 68 x 8.5 mm

• Compliant with SFF8432, 14.8 x 56.5

x 11.85 mm

• Compliant with SFF8432, 14.8 x 56.5

x 11.85 mm

Weight • • • 20 g 18 g 19.5 g

Bail Latch Color • Gold • Black • Blue

EMI • CE, FCC, VCCI CE, FCC, VCCI CE, FCC, VCCI• •

Safety • • LVD UL, TUV, CDRH UL, TUV, CDRH•

Produktspecifikationer

Varumärke:	D-Link
Kategori:	Inte kategoriserad
Modell:	DEM-QX10Q-LR4
Färg på produkten:	Blue, White
Sladdlängd:	- m
Snäll:	Droog- & stoomstrijkijzer
Automatisk avstängning:	Ja
Automatiskt anti-kalksystem:	Ja
Antidroppfunktion:	Ja
Sprayfunktion:	Ja
Kontinuerlig ånga version:	- g/min
Variabel ånga:	Ja
Yttersulans material/beläggning:	Titanium zoolplaat
Steam boost prestanda:	180 g/min
Steam boost funktion:	Ja
Designad för resor:	Nee
Icke-roterande kabel:	Ja
Anti-kalk:	Ja
Järnets kraft:	2600 W
Förprogrammerade temperaturer:	Ja