D-Link DES-1100 Bruksanvisning
D-Link
ej kategoriserat
DES-1100
Läs gratis den bruksanvisning för D-Link DES-1100 (48 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 3.7 stjärnor baserat på 2 recensioner. Har du en fråga om D-Link DES-1100 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/48
Getting Started Guide
Erste Schritte
Guide de démarrage
Guida introduttiva
Guía de introducción
Краткое руководство пользователя
快速安裝指南
Guia inicial
Petunjuk Pemasangan
本製品のご利用にあたって
2
About This Guide
This guide gives step-by-step instructions for setting up
all D-Link EasySmart switches. Please note that the
model you have purchased may appear slightly different
from those shown in the illustrations.
For more detailed information about your switch, its
components, making network connections, and technical
specifications, please refer to the User’s Guide included
with your switch.
Step 1 – Unpacking
Open the shipping carton and carefully unpack its
contents. Please consult the packing list located in the
User Guide to make sure all items are present and
undamaged. If any item is missing or damaged, please
contact your local D-Link reseller for replacement.
- One D-Link EasySmart Switch
- Rack mounting bracket
- Power cord
- User’s Guide CD with SmartConsole Utility program
- One multilingual Getting Started Guide
- An accessory kit for one ground screw
Step 2 – Switch Installation
For safe switch installation and operation, it is
recommended that you:
♦ Visually inspect the power cord to see that it is
secured fully to the AC power connector
♦ Make sure that there is proper heat dissipation and
adequate ventilation around the switch
♦ Do not place heavy objects on the switch
Desktop or Shelf Installation
When installing the switch on a desktop or shelf, the
rubber feet included with the device must be attached on
the bottom at each corner of the device’s base. Allow
enough ventilation space between the device and the
objects around it.
Figure 1. Attaching the rubber feet
Rack Installation
The switch can be mounted in an EIA standard size 11-
inch rack, which can be placed in a wiring closet with
other equipment. To install, attach the mounting brackets
to the switch’s side panels (one on each side) and
secure them with the screws provided.
Figure 2. Attaching the mounting brackets
Then, use the screws provided with the equipment rack
to mount the switch in the rack.
Figure 3. Installing the switch in a standard-sized
equipment rack
Step 3 – Plugging in the AC
Power Cord
You can now connect the AC power cord into the rear of
the switch and to an electrical outlet (preferably one that
is grounded and surge protected).
Figure 4. Plugging the switch into an outlet
Produktspecifikationer
| Varumärke: | D-Link |
| Kategori: | ej kategoriserat |
| Modell: | DES-1100 |
Behöver du hjälp?
Om du behöver hjälp med D-Link DES-1100 ställ en fråga nedan och andra användare kommer att svara dig
ej kategoriserat D-Link Manualer
31 Augusti 2025
31 Augusti 2025
24 Augusti 2025
4 Juli 2025
ej kategoriserat Manualer
- Exquisit
- Mytee
- Doepke
- Qoltec
- Vulcan
- Steinel
- Phoenix
- MOZA
- Mars Gaming
- Brennenstuhl
- Cougar
- Hughes & Kettner
- Fanatec
- Swann
- Vocas
Nyaste ej kategoriserat Manualer
15 September 2025
15 September 2025
15 September 2025
15 September 2025
14 September 2025
14 September 2025
14 September 2025
14 September 2025
14 September 2025
14 September 2025